Question about Hyundai ImageQuest HP4240 42 in. Plasma Television

2 Answers

No picture When turned on, the power light goes from red to green then snaps back to red after about 10 seconds. There is no picture whatsoever, just a black screen! HELP!!

Posted by on

  • rajamin Jan 21, 2008

    I have a similiar problem, when i turn the tv on it goes from green to red, like on stand by, plus i dont have a remote control for it and the tv is on child lock need urgent help please!!!!!!!! model no wtp-20

  • Dossmaster Jun 09, 2008

    SOund but no picture on my Hyundai pd421. All fuses on main power board are O.K. with multimeter test. Any suggestions welcome.

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

It could be in the horizontal output circuits causing the power supply to shut down in a protect mode. Technician: Tim Rasch

Posted on May 23, 2007

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

Most likely the main power supply is defective.

Posted on Jun 08, 2006

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My protron pltv-37c will turn on for 10 seconds the light turns green then goes to red after ten seconds


The green light indicates power is being applied. The change from green to red indicates that the power supply has failed

Oct 29, 2012 | Protron PLTV-32 Television

1 Answer

I am currently working on a Sharp Lc37sb24u. I was originally thinking it had a bad inverter board but now I am not so sure. When I turn the tv on the picture comes up with audio for about 2 seconds the...


Did you check the service manual troubleshooting guide yet. You can try disconnecting the power to the inverter board and see if it will stay on and have sound.
Service manuals:
http://elektrotanya.com/?q=showresult&what=Sharp%20LC37SB24U&kategoria=&kat2=all

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.
Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

Oct 27, 2011 | Sharp LC37SB24U 37 in. LCD TV

1 Answer

Replaced bulb yesterday worked fine. Today light will not turn on. projector turns on both lights green for 10 seconds, then power goes red and status blinks green for about 5 seconds, then status light...


green green is power on, normal
then it tries to light the lamp, but it can't so the protection circuit comes activated.
you get red and green blinking

Then it goes to standby, red and off.

so something has happened to the lamp, or lamp ballast power supply.
Take the lamp out and check if all is OK with the 2 terminals in the connector, and the leads to the lamp are intact.

Failing that, I would suspect the ballast lamp power unit

Mar 25, 2011 | Mitsubishi HC1600 Projector

1 Answer

Maganavox flat screen tv no pic, red light blink codes...


Those blinks are fault codes. To know more visit the site linked here. http://electronicshelponline.blogspot.com/

Mar 25, 2017 | Televison & Video

1 Answer

32" scott


your tv has suffered esd damage. likely control board.

Dec 07, 2008 | Akai LCT3201AD 32 in. LCD Television

4 Answers

TV Picture Goes Black


I had the same exact problem.
I removed the bulb and cleaned it. There is a small screen at the top of the bulb and it was covered with dust. Once it was cleaned I replaced the bulb and it solved the problem.
Thanks to those who posted the solutions

Jul 28, 2007 | Sony Grand WEGA KDF-60WF655 60" Rear...

1 Answer

Just black screen


Hi i have the same problem i think it is the power board you can buy these on ebay for about £200 i havent botherd as yet as i might just buy another tv as ive had no end of trouble with it dont think i would ever buy a hyundai tv again!!

Dec 02, 2006 | Hyundai ImageQuest HP4240 42 in. Plasma...

Not finding what you are looking for?
Hyundai ImageQuest HP4240 42 in. Plasma Television Logo

184 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Televison & Video Experts

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Marvin
Marvin

Level 3 Expert

81423 Answers

Jay Seifried

Level 1 Expert

52 Answers

Are you a Hyundai Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...