Touchscreen turned itself off and keeps flashing. HELP
I have had the LG viewity less than 3 weeks, and it just turned itself off,the lg logo flashes on the screen and the 3 buttons down the button light up and flash, but it wont respond to anything! I even took the battery out and the screen was still flashing. Can anybody help me?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Your phone's softwere is broken.To fix it go to your nearest mobile service center and give your phone a flash that will solve your problem.Or you can download a flash softwere in your pc and you can give a flash yourself.
hi, even i have the same problem, probably i don't think the flash doesn't work, but even i didn't know how to use it. however, the instruction manual says there are 3 options in flash, they are auto- that is it turns flash automatically on when it turns on.
red eye reduction that is it says it will flash twice to reduce red eye but i never see the flash on and the flash off, that is it will not turn on and usually whenever you exit the camera the flash will default to turn off mode. you will need to switch the flash back. hope you understand.
Even thought your phone is unlocked from virgin the software is still a virgin viewity software. your can try and press on the arrows <<<<>>>>> at the bottom of the screen when the come up this will allow you to remove the network label but not on startup that requres a mobile shop to reflash the phone with generic software which will cost up to £25 shop around
1. Turn off the LG KS-20 completely (do this by pressing and holding the power button and wait for the prompt).
2. Press and hold these three buttons–volume down, Call and power–till the LED (this is beside the front camera) flashes.
3. Release the buttons. That same LED should flash blue/red/green and power up.
I have the same problem. But i had solved it. I use a lighter to burn on my viewty's touch screen, and it is working properly again within 30 secs. And ofcourse, do not burn the touch screen without a screen protector. Hope this solution would help.