Question about Washing Machines

2 Answers

Hoover 620 water not pumping out, motor working i think

Posted by on

  • Anonymous Jan 04, 2009

    won't fast spin or pump out. Have checked for any blockages and the filter.

  • Anonymous Mar 14, 2009

    wash all day, sock whites overnight next day starting washing when gets to next cycle no water is pumping out. it's only giving me a wash cycle is there anything produce i can buy to unplug any build up sock

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Hey open the front and you will see the water pump there. You can undo this but it is better to check the drive belts under the machine

Posted on Dec 03, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 958 Answers

Hello zorro,

you can check your water pump filter assembly for debris and dirt or socks or small clothes.

sometime they do stuck in there and water pump i running but not pumping water out.

tnx 4 using fixya,

drcool

Posted on Sep 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where i can buy water pump for hoover 620 washing machine


If you are in Sydney I will buy the machine off you for $100. Erik 0410 501 491. Cheers

Mar 14, 2011 | Washing Machines

2 Answers

Hi there, i have a hoover elite 1220 i think 7.5kgs i brought it second hand of ebay and it has been a good machine but it has started to play up lately. It washes all on the normal cycles and stuff i...


Hi,
Following will be the causes for water not draining properly

1.There is a motor/Pump which operates to to drain the water check whether that motor is working.

2.Check filter and clean it

3.Check the drain pipeline whether it clear

4.Check the inlet valve of the machine Sometimes the drain works properly but the inlet solenoid valve will not hold and the water keeps coming in and fills the drum

Thank You

Sep 02, 2010 | Hoover HTC243 Top Load Washer

1 Answer

I have a Hoover Vision 1600 plus that has stopped spinning. Water pump works, water inlet works- drum will not spin. Help!


Could be motor or motor brushes you could remove one carbon brush check if its worn should be at least 1/2 inch left in order to funtion well

Apr 01, 2010 | Washing Machines

2 Answers

Hoover CA230 1300 Special Edition Washing Machine


I had the same problem. My husband checked the carbon brushes attached to the motor and ran the machine on spin. The brushes were sparking so he assumed they were worn and replaced them and hey presto machine works fine now. The brushes cost 23.99 and were just bought from a local shop but can be bought online cheaper. Hope this helps solve your problem. Essex

Mar 08, 2009 | GE S8000E

2 Answers

Hoover 620 washing machine - low water rate


Hi there, how's the machine? Something else you might want to look at are the filters in the connections to the taps - these are the first point of call when checking for debris - it is true that there are filters further in, however check the tap connections first.

Nov 24, 2008 | Washing Machines

2 Answers

Hoover Commander 7kg (about 9 years old) not working. It does not spin in any wash cycle, although it can be done manually with ease in the 'spin dry' cycle. There was a strong rubber smell before. Any...


I have a Hoover Commander Model 2045LOAUS. The machine washes OK but will not spin (ie pump the water out). Could it be a burnnt out spin solenoid or motor??

Apr 26, 2008 | Hoover Washing Machines

3 Answers

Hoover CA230 1300 Special Edition Washing Machine


Should you have to use un due force to get the filter undone on the Hoover 1300 special deition washing machine

Jan 14, 2008 | GE S8000E

1 Answer

Hoover Aristocrat Front Load Washing Machine


i think you will find the carbon brushes r worn out they r mounted on the side of the motor held on by 2 5.5mm nuts or 2 screws 1 brush on each side of the motor switch off at the mains b4 you start work good luck

Aug 19, 2007 | Equator EZ 3600 CEE Front Load Washer /...

1 Answer

Hoover AAA 140


I have this problem too. Also i've had error code 5 come up as well. I think error code 3 is saying that pumping water out for so many minuites has failed. I've cleaned and run the pump out of the machine and everything works ok and there is no blockages. There still could be a problem when wired back in the machine. I have seen the pumped water coming out of the waste hose. Does anyone know if there is a sycro motor on the back of the controller or program selector that may be failing ? (ie: teeth worn off drive gear like you get on centrol heating valves).

May 17, 2007 | Hoover AAA140 Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...