Question about Fax Machines

1 Answer

I have a fellowes powershred 220CC. The plastic gear in the drive unit is stripped. I need to find a new gear.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,120 Answers

Http://fellowes.com/Fellowes/site/support/support_authorizeddealers.aspx

I don't think Fellowes sells parts to end users.

Posted on Sep 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

07,010.43:20915


07 errors are usually a bad Process Drive Motor 005K12670, which is in the front right. Its big bundle of white gears get chewed up, usually due to cracked camshafts 020K14800 or 008K02160.

Afterward, there are important alignments, like latching the printhead in the disengaged position and timing the Process Drive.

Sometimes the screws strip out the chassis, and then you need to repair the mounts using a kit 655N00426.

Good luck.

Whit -- Item, Inc
256eae19-7e69-4c07-abbc-fe9ed4c5bfb3.png

Dec 30, 2013 | Xerox Phaser 8560MFP/SN - 30 PPM...

1 Answer

I have an older Fellowes 320 Powershred strip cutter. The blades are no longer cutting "deep" enough to produce discrete strips. Can I somehow adjust the blades to restore their cutting...


I am afraid that there is no adjustment for that problem. The cutting cylinders get worn down over time and are unable to cut cleanly . The head assembly can be replaced but it is cheaper to get a new shredder.

Jun 09, 2011 | Fax Machines

1 Answer

Error 5100 for canon mp258


5100 is a carriage error, check the timing strip for contamination(plastic strip about 1/4" in width)
The unit is not homing, check for obstructions.

This error means that there is something obstructing the printing process. Check inside your printer through the gears that you can see under the lid. There should be something obstructing the gears such as dirt. There may be even some paper caught underneath the rollers. Jiggle around to see if you can jostle anything free. Check VERY thoroughly.

May 17, 2011 | Fax Machines

1 Answer

The plastic gear that runs off the worm drive from the motor is stripped. Where can I get a new one?


You will have to buy a new motor assy. the plastic gear does not come on its own.

Apr 26, 2011 | Fax Machines

2 Answers

Brother MFC-9840CDW. Print unable 29 error message. What do I do???


I got this error today. After examining the drum unit I saw one of the 4 drums (cyan) had a strip of sticky plastic wrapped around it, preventing it from turning easily. The plastic was from the drum unit itself. It held the cyan wiper pad in place. My drum unit needs to be replaced after 3300 pages. It was supposed to last for 17,000.

I have pulled out the color toners and am using it with only black until I get a replacement.

Jan 14, 2009 | Fax Machines

1 Answer

Fellowes shredder will not work


Check the front door switch and the BIN FULL switch actuator.

Oct 22, 2008 | Fax Machines

2 Answers

Gear making a grinding noise


Not too good news I'm afraid. It sound like the fuser gear has failed. Generally the fuser unit (hot section or hot rollers in the back) need to be replaced. Usually when the gear has worn or failed the fuser rollers are also worn and need to be replaced. The gear can be replaced seperately but is a very risky operation and usually results in parts in the fuser unit falling appart due to age and wear, so it is best done as a unit. If possible do not run the machine as it can cause damage to gears around the fuser unit. The best option is to find out how much a fuser unit and labour to fit would be at your local service centre.

Jan 29, 2008 | Brother IntelliFAX 4100 Laser Fax

Not finding what you are looking for?
Fax Machines Logo

Related Topics:

172 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fax Machines Experts

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5695 Answers

polytek

Level 3 Expert

452 Answers

Are you a Fax Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...