Question about JVC (BHNEELPLP03) Projector Lamp for LX-D500

2 Answers

Problem of video camera .

Not able to shoot. In shooting mode( both in auto and mannual mode), remove cap appears on the screen. Though cap has already been removed. Rest all other functions are normal.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 513 Answers
Re: Problem of video camera .

I think you're on the wrong product page. Even if your camera isn't on the list, you can still suspect that it's the same problem, and ask them to proove you wrong ;] Thanks for the credit Techman, I couldn't be more honored then being qouted by our #1 man ;]

Posted on May 18, 2006

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 3,130 Answers
Re: Problem of video camera .

Got this one from sillygirl say thank you sillygirl!!!!Theres a ccd problem with several manufacturers and JVC is one of them see if your model is on the chart. Good Luck

Posted on May 17, 2006

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How does a Continuous Lighting LED Light work? How about Falconeyes DV-405V LED Light?

The continues lights are mostly integrated with the camera devices for capturing the video to stay light on until you turn them off. For more information you can also visit this stuff :
How Does Continuous Lighting Led Light Work How About Falconeyes Dv...

Dec 13, 2013 | Spyder Auto 2006-2009 Volkswagen GTI...

1 Answer

Our Hitachi Projector CPX82 does not display when connected to Linus OS

I have added here a link which will help you to set-up the projector for Windows. You have Set-up Windows for dual screen mode to get the video through the projector.

Projector set-up


Apr 27, 2012 | Hitachi PROJECTOR, HITACHI, CP-RX82, X -...

1 Answer

I am contemplating purchasing a large inflatable backyard Movie screen for my husband's 70th birthday party. The theme will be "Oscar Night, a red carpet affair."I will have about 100 people in...

Yes this is very doable with current technology available. You will need a nice camera in addition to your projector. Most nicer cameras have an output of either s-video or rca that will allow you to carry the video seen through the camera to the projector. You will simply plug the output of the camera into the input of your projector. You will only be able to travel with the camera as far as your cord will reach though... You may consider doing a test run at someone else's house or while your husband is gone to see the setup process and limitations of this setup.

Mar 03, 2011 | BenQ (200NSH-LAMP) Projector Lamp for...

1 Answer

I get a blue screen on my misubishi sl1 projector lamp and no signal appears on the screen


Make sure the Computer Input is set to VGA, Computer, or RGB (depending on which projector model you have).

There are also known known hot-key combinations used to switch the laptop to its external VGA mode. If you are using a laptop.

Check the cables as well if properly connected both on computer and projectors end.

Hope this helps

Apr 02, 2010 | Mitsubishi SL1 projector lamp Projector...

2 Answers

I have a NEC mt1055 and the unit just had new bulb put in here and it has the power and standby light come on and the fan doesn't turn on here and the standby light is yellow and status is red

The NEC’s work on a reducing time basis, they count the hours that they have been operational and refer to this as the life of the bulb – 1600 hours. When the 1600 hours has been reached the projector shuts itself down into standby mode never to be restarted even after changing the bulb / filters. This is because the unit needs to be reset, which needs to be done as follows (not included in any of the bulb replacement instructions):-
  • Plug Projector in so it is in standby mode – Orange light lit, Red status light lit (not flashing)
  • Using the remote control, hold down the power off button for 30-45 seconds
  • This will reset the status button, removing the red light
  • Power up the projector and select Menu
  • Select Projector Options
  • Select Set-up – a number of tabs will appear called pages
  • Arrow across the pages (MT850 is Page 5) until an option called “RESET LAMP HOURS” is shown
  • Move onto this option and press enter on the projector itself, confirm that you want to reset the counter
  • Projector is now back to life

This works for all NEC projectors, the page number may be different though where the “RESET LAMP HOURS” option resides.

Oct 07, 2009 | NEC MT850, MT1050, MT1055, MT1056...

1 Answer

Projector appears to be in lock-out (exceeding 2000hrs on bulb)

1) Press the RESET button on projector for 3 seconds or remote control TIMER button for 3 seconds and display the total lamp used time. 2) Press the RESET button on projector or remote control MENU ON button during displaying the lamp used time. 3) Select the ?0? on the screen using the MENU ( ) button or DISK PAD.

Aug 12, 2009 | Hitachi CP840/940LAMP Projector Lamp for...

1 Answer

Picture or screen displays multicolours : The screen looks bluish with mixed patches of light yellow,purple and grey colours; as though the lens or bulb were wet. Still getting alerts to clean air filter...

Dont use a damp cloth. Use an air hose or can air if possible.
The color differences may be your color wheel and not your
air filter. You may have to reset the projector to clear the alerts, just hold both volume buttons for 5 seconds. I've found its usually 30 seconds
Hope it helps, good luck

Apr 07, 2009 | Projector Accessories

1 Answer

Iamge from the previous projection from RGB still appears when i switch to Video mode. why is it?

Hi There

Looks like your Projector's Mainboard has locked the memory and is stuck.

If you can access the Projector's Menu - Reset the machine and switch it off.

If the problem still occurs , you will have to take your Projector to a Service Centre to have to Mainboard repaired.

This is 100% NOT a lamp issue.

Apr 18, 2008 | Hitachi (DT00431) Projector Lamp for...

1 Answer

NEC MT820 Projector

Press and hold the power button on the remote control for 10 seconds.

Sep 07, 2007 | NEC (MTLAMP820/1020) Projector Lamp for...

Not finding what you are looking for?
Projector Accessories Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Projector Accessories Experts


Level 3 Expert

2236 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

5327 Answers

color wheel light...
color wheel light...

Level 2 Expert

137 Answers

Are you a JVC Projector Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides