Question about GE Dishwashers
I'm Harvey the Master Plumber.
You want to know what to do if the d/w won't start?
First lets check the breakers (fuses). If good then check the connection at the d/w. It's under the d/w behind the kick plate under a cover box. 9 times out of 10 you'll find a loose or burnt connection there. That done, it's time to call in warranty repair. If beyond warranty you might consider utilizing our Repair Directory to find a repairman.
Feel free contact me again!
Please give me a rating here at fixya.com before you sign off
Harvey your Master Plumber
Posted on Sep 13, 2008
Tips for a great answer:
Jan 18, 2016 | Frigidaire Dishwashers
Dec 16, 2015 | Samsung Dishwashers
Sep 09, 2014 | Dishwashers
Nov 09, 2012 | Jenn-Air 24 in. JDB1080AWS Built-in...
Jan 04, 2011 | Dishwashers
START/RESET status indicator light flashing
You have pressed the indicator light flashing START/RESET pad while the START/RESET dishwasher is running. This will cancel the cycle. The light will stop flashing after the dishwasher drains (about 90 seconds).
• Press the pad once to start the dishwasher. Press the pad a second time when the dishwasher is running only if you wish to cancel the cycle.
Power to the dishwasher was turned off while a cycle was running and power has just been restored to the dishwasher. The blinking lights indicate that the dishwasher is draining the potential water inside.
• The light will stop flashing after the dishwasher drains. A new cycle will start automatically.
Nov 29, 2010 | General Electric GLD6966RSS Stainless...
Nov 26, 2010 | Asko D1776 Built-in Dishwasher
Sep 07, 2009 | Whirlpool 24 in. ADP5962 Free-standing...
Feb 12, 2009 | Electrolux Frigidaire Professional Series...
124 people viewed this question
Usually answered in minutes!