Question about Whirlpool Kitchen Ranges

1 Answer

Oven won't light or self cleaning but broil works

I have a whirpool accubake gas/electric oven can not find model or serial number though. The oven will not ignite and the self cleaning is slso inop. It has an electric ignitor. he burners work and the broiler ignitor works. I checked the wire to the ignitor have have power and also ohmed the ignitor and it checked good that way but i don't know if that is a proper check or not. Just not getting the spark there. Any suggestions?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 409 Answers

Sounds like the spark module to me. you need to find the model # for this one. if you have the electrical schematic, you can ohm out the spark module.

the model & serial #'s should be under the door frame, when you pull out the bottom drawer.

Posted on Sep 13, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My oven will self clean and the top will come on when in Broil but oven will not preheat in bake mode.


self clean and broil will make same heat for self clean
if this is a gas range then change bake glow ignition
more info can be yours send us full model # of range for more exact info of your range.
electric range will be element bake or broken burned wire

Dec 06, 2014 | Hotpoint Kitchen Ranges

1 Answer

My stove top works, but the oven does not. While preheating oven it gave a loud boom, everything went black in the oven and nothing worked!!


Sounds like you got an electrical short. Pull out the range, unplug it, and then check the electrical connections where the wires go into the range. If that's okay, then check the oven bake & broil elements. Also check the electrical connections to those elements. I'll bet you'll find one that shorted to the back of the oven.

Sep 30, 2014 | Kenmore 30" Electric Self Clean Drop-In...

1 Answer

Oven elements not working


Good Afternoon Friend, thank you for your inquiry!

I see that you are having trouble with both your bake and broil element on your Frigidaire range. Can you think about what may have happened prior to this occurrence? For instance, did you notice any error codes or strange noises? Also, do you have an electric or gas range? May I please have your model number? The serial tag, which lists your model number, is typically located in the storage drawer, on the right side. With this information I can assist you better in pinpointing the problem. Thank you! -Z

Jun 06, 2014 | Frigidaire 30" Self-Cleaning Freestanding...

1 Answer

RBS305 replaced thermal cutoff twice and again it won't come on bake or broil


Good Evening!
The self clean feature is causing your thermal fuses to fail or open. This is a safety mechanism that when open (bad) won't allow electricity to pass through any longer. The temperature in your oven exceeds what the components in your appliance can handle. If you want your oven to last it's longest, I would discontinue using that feature. If ever the control board or keypad on your oven by way of the self clean feature, we can help you with that. Fixyourboard.com can help. Send all inquiries to info@fixyourboard.com . Thank you!

Jun 05, 2017 | Whirlpool RBS305PD Electric Single Oven

1 Answer

Whirlpool gas oven will not heat


most likely you have a bad ignitor,pull out the racks and remove the floor to the stove,turn on the bake,if the ignitor glows but it takes more than 40 seconds for the flame to light you have a bad ignitor even though it glows and if it doesn't glow at all the ignitor is bad,also if the broil lights on top and the bake doesn't change out the ignitor.next time send the model number and i can look up your machine to help you better.

Nov 15, 2011 | Whirlpool Ovens

1 Answer

I have a Whirlpool Accubake gas stove Model SF362LXSQ. Range top is working fine Oven will not ignite. No gas smell even. When I set the oven to start I can hear the click and see the spark sometimes, but...


Iquitous, we're sorry to learn of your Oven concerns. We would like to discuss this further with you. Please email us at Whirlpool_Reviews@Whirlpool.com at your earliest convenience with your name, address, a phone number and best time to reach you along with your model and serial number.

Oct 26, 2017 | Whirlpool 30" Self-Cleaning Freestanding...

1 Answer

Self cleaning gas range: Bake and broil will not light up.


the thermal fuse in back is out. sometimes they are resetable

Feb 09, 2010 | Whirlpool 30" Self-Cleaning Freestanding...

1 Answer

Whirlpool Accubake self cleaning oven problems


My Whirlpool Accubake oven just did the same thing. There may be a class action suit... contact Emge

Jun 03, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

235 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Ismael Rodriguez...

Level 2 Expert

171 Answers

Cindy Wells

Level 3 Expert

5268 Answers

Are you a Whirlpool Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...