Question about NEC PX-42VP4PA 42 in. EDTV-Ready Plasma Television

1 Answer

Problem with my NEC PX-42VP4PA

Hi guys , I have a NEC plasma m: PX-42VP4PA, when you turn it on , the image stays on for a few seconds and shuts down. Could help to see if it is repairable? appreciate your help !!!

Posted by on

  • craigpauls Dec 19, 2008

    I have same problem:TV shuts off and goes into standby in a few

    seconds. Note: If you unplug the video input, the tv stays on, and you can listen to the audio.I/and or power supply?Im thinking it could be a video amp issue

  • RUSHING01 Mar 11, 2009

    I have a Nec Plasma monitor Model Number (px-42vp4a)
    bought it used with only producing picture for 5 secs. with video source plugged in. no matter what video source tried all,

    1. re-soldered the whole power supply no go.
    2. replaced couple capacitors.

    when plugged in saw sparks coming from a circuit on the power supply, need a new one did not see short in board can someone help

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

It goes on for a while and then shuts off after then the colour show not good i need help for this problem

Posted on Apr 25, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi there, my LG Plasma 42PC5D show no video or sound. I was watching video by the HDMI input. Should I change the YSUS board, the ZSUS board or any other? Thanks for your time replying.


If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/
Faults & possible causes to LCD & Plasma TVs are given with illustrations. You can get an idea about the fault to an extent.
Search the site by type in the "BRAND NAME" of your device; (Exclude the model number), in the "Search box at the top right of the display window of the Homepage" to get gathered related posts

Jan 09, 2017 | LG Televison & Video

1 Answer

SONY flat screen will turn on green light showing but no picture. TV turns off in 5 seconds. Advice???


Sounds like display panel fault. If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Line faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent. Faults to all LCD & Plasma screen are similar, irrespective of its brand and screen size.
Search the site by type in the "BRAND NAME" of your device; (Exclude the model number), in the "Search box at the top right of the display window of the Homepage" to get gathered related posts

Jan 09, 2017 | Sony Televison & Video

1 Answer

I have a Emerson model LF391EM4 flat screen that when turned ON shut itself off after apx 10 seconds. It has never done this before, what can I try to do?


REBOOT IT BUT HOLDING DOWN ON THE POWER AND TURN IT BACK BUT HOLFD IT DOWN FOR ABOUT TEN SECONDS AND THEN TURN IT BACK ON

Jan 09, 2017 | Emerson Televison & Video

1 Answer

What is the problem of my sony bravia klv-32bx35a double image after sodering the t con bord the image was lost all black....hope you can helpe thankyou


If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent. Faults to all LCD & Plasma screen are similar, irrespective of its brand and screen size.
Search the site by type in the "BRAND NAME" of your device; (Exclude the model number), in the "Search box at the top right of the display window of the Homepage" to get gathered related posts

Jan 09, 2017 | Sony Televison & Video

1 Answer

LG LED TV has sound but no picture. Went out all of a sudden. Image shows with flashlight. Flashes for split second on power up and power down.


Your screens back light has most likely failed and or the voltage controller for the back light, both should be replaced.

Jan 08, 2017 | LG Televison & Video

1 Answer

Hi Bush tv is flashing but not turning on at all. What can i do?


Hi press & hold on-off button while holding unplug power plug from the wall continue holding for 30 seconds.,.Plug in the POWER plug while holding on/off button hold for another 30 seconds ......,.Good luck.,

Jan 08, 2017 | Televison & Video

2 Answers

Vertical lines on my plasma tv


If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Line faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent. Faults to all LCD & Plasma screen are similar, irrespective of its brand and screen size.
Search the site by type in the "BRAND NAME" of your device; (Exclude the model number), in the "Search box at the top right of the display window of the Homepage" to get gathered related posts

Jan 08, 2017 | Samsung Televison & Video

1 Answer

I have pioneer plasma tv about 6 years old. I turned the power on, sound but no picture. Do you think it is worth fixing?


no
plasma tv units consume considerable power and the latest led units don't so for the extra cost of a new unit , there will be a power saving over the years

Jan 08, 2017 | Pioneer Televison & Video

2 Answers

Red exclamation point on verizon set top box


How to reset your Set Top Box to fix common problems FiOS TV Residential...
Resetting your Router and Set-Top Box can resolve a variety of issues such as:
  • Missing Interactive Media Guide (IMG) or On Demand menu
  • Unresponsive Set-Top Box
  • DVR recording problems
If you are having any of these issues, you may need to reset your Router and Set-Top Box. Will resetting my Set-Top Box erase the selections I have programmed into my remote?
No, all settings and selections you've entered such as device codes, favorite channels, and recent On Demand selections are saved and available after resetting your Set-Top Box.

Resetting your Router and Set-Top Box
Always reset your Router first and then check to see if that resolves the issue. Resetting your router may be all that is needed.
Important note about your router To avoid problems with your FiOS TV service, make sure your router is plugged in and turned on at all times. Even if you are not currently using the Internet, your router still needs be turned on so that FiOS TV can function properly.
To manually reset your router:
  1. Unplug the power cord to your Router for 15 seconds and then plug it back into the electrical outlet.
  2. Wait 30 seconds and then check to see if this resolves the trouble. If you still have the problem, follow the steps below to reset your Set-Top Box.
To manually reset your Set-Top Box:
  1. Unplug the power cord to your Set-Top Box from the electrical outlet for 15 seconds and then plug it back in.

    Note: Don't confuse the power cord that provides electricity to your Set-Top Box with the coaxial cable that is connected to the back of your Set-Top Box. Unplugging the coaxial cable will not reset your Set-Top Box. Since many issues can occur if your coaxial cable is not securely fastened, now would be a good time to check to ensure all connections are securely connected.
  2. Wait for the time to appear on the front of the Set-Top Box, then power it on.
  3. Wait several minutes while the Interactive Media Guide updates.
  4. Check to see if this resolves the trouble. If you still have the problem, your Set-Top Box may need to be re-initialized. Contact the Fiber Solutions Customer Support for further assistance.
I have to reset my Set-Top Box frequently, is this normal?
No, if you routinely have to reset your Set-Top Box more than three times a week, it is likely there is an issue with your Set-Top Box that needs to be resolved. Contact the Fiber Solutions Customer Support for further assistance.


also you can call for tech support at Dial 1-800-VERIZON (1-800-837-4966)

Oct 05, 2012 | Televison & Video

Not finding what you are looking for?
NEC PX-42VP4PA 42 in. EDTV-Ready Plasma Television Logo

Related Topics:

594 people viewed this question

Ask a Question

Usually answered in minutes!

Top NEC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71195 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a NEC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...