Question about Sabrent TV-PCIRC (TVPCIRC) Video Capture

1 Answer

Hearing Audio upon Start up

I just bought this device and now whenever I start up the pc my audio picks up channel 4 without starting the tv software. I removed all the tv tuner software and even the driver but it still plays until I start up the tv software.

Posted by on

  • tsd1970 Sep 13, 2008

    I use xp and the driver that my tuner card uses is the saa7130.

×

1 Answer

It's good

Posted on Nov 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After reformatting no sound


After a fresh install of an operating system you have to set up your sound again
if your computer came with a motherboard disc the sound drivers could be on it
click start control panel administrive tools computer management device manager scroll to sound,video and game controllers you might see a yellow question exclamation mark? ! or a red X Right click to reinstall drivers
click start control panel sounds and audio,volume,advanced,speakers make sure you have selected the
(((appropriate speakers))) also audio you will find 3 drop down lists make sure you have the correct settings there
also
click start control panel sounds and audio devices select advanced there might be a tick in the mute box untick it
if his does not fix the problem
click start control panel sounds and audio devices you can adjust the volume there also select speaker volume you can change your settings there you can also tick in the box place icon in taskbar for any further volume control settings you will need to right click on the volume icon system select adjust volume


click start control panel sounds and audio,volume,advanced,speakers select the appropriate speakers from the drop down list or navigate to the device manager scroll to system devices + to expand,system speaker right click properties then select use this device (enable) also you might check
the speaker plug/outlets is usually at the back of the computer or if it

Oct 22, 2011 | TV Accessories

1 Answer

How do I connect my RCA standard definition television to surround sound if it doesn't have an audio output. I purcahased a colby surround sound system with DVD. I can't get the system to operate with my...


To connect your sorround sound system to your TV that doesn't have audio and video inputs, you have to use an RF modulator, this devices converts your audio and video signals into a channel 3 or 4 VHF channels which you can tune at your TV connecting a coaxial cable, to change from DVD player to antenna without disconenecting cables, you can add an antenna switch device (2 inputs 1 output), this devices should be available at any elecronic parts store.

Feb 11, 2011 | RCA TV Accessories

1 Answer

M-Audio 1814 Device is not being recognized on my pc --


Hello,
I have the same problem, did you find the solution?
I own a M-Audio Firewire 184 and it is not anymore recognized by any system. I testet in in 4 diferent computers, like Windows XP, Windows Vista, Windows 7 and Mac also. None of them recognized any soundcard attached. email: boglea_adrian@yahoo.com
thank you in advance, Adrian

May 12, 2010 | M-Audio Firewire 18/14 (99004073600) Audio...

2 Answers

Ive just bought a TV to PC(VGA TO TV Converter), ive connected everything and i can see my laptop screen on the TV monitor but there is no sound


I dont think the unit is designed to use sound, it just converts vga to tv, you may have to use a 3.5 to rca phono audio cable to go from the laptop to an audio device, or an imput on your tv

Nov 07, 2008 | StarTech.com VGA to NTSC/PAL PC to TV...

1 Answer

INPORT Installed, Sound Disappears


The Xitel site http://www.xitel.com/USA/support_inport.htm says when this happens, " 1. Go to START -> CONTROL PANEL -> SOUNDS AND MULTIMEDIA PROPERTIES -> AUDIO TAB
2. Make sure that in the Audio tab your soundcard appears as the Preferred Playback device with USB Audio or INport as the Preferred Recording Device. There should also be a check next to the option 'use only preferred device'.
3. When you start LPRecorder you should also make sure that Recording Device is set to USB Device or INport and Playback Device is set as your soundcard and that there is a check next to the option Simultaneous Playback."

Jul 20, 2008 | Xitel INport (HFLI1X1) Audio Input

2 Answers

"cannot connect video smart tee to vmr filter" and "cannot render video capture pin to null filter"


You may be right - the drivers may be gone. Un-install the drivers for it using the Device Manager, and re-install from the CD.

May 23, 2008 | Philips SAA7130 TV Tuner/FM Radio/Video...

2 Answers

Sound is not recorded


The problem would appear to be your audio settings.

You have the audio input set to Realtek HD Audio Input. That is the audio input on your soundcard, not the video capture card. You will need to change this so that you have the capture card selected. (I am not familiar with this exact model of card so I can't tell you exactly what it will be called.)

Alternatively, if you are trying to capture the audio via your soundcard (not recommended as it can cause sync problems) you will need to make sure that the 'line in' channel in enabled in the Windows mixer:

Start>Control Panel>Sounds & Audio Devices>Audio Tab>Click Volume in sound recording section>Tick Line In

Hope this helps,

Matt

Mar 06, 2008 | KWorld V-Stream Xpert VS-L883D...

4 Answers

WinFast PVR2000 - recorded video has no sound


check the software configuration for the tv card to see if it using the correct audio device

Feb 24, 2008 | Leadtek Winfast PVR 2000 (663001C) Video...

1 Answer

No sound when recording


Well, looks like you went through all the steps, but I'm wondering about one thing... If you goto: Start -> Control Panel -> Sound and Audio devices There are 5 tabs at the top, 2 of which you'll be paying attention to "audio" and "voice". On these tabs are the record settings, which you will want to have the drivers for the m-audio in the record processes. For instance, I have 4 options in the record process: Logitech (mic built into camera) SoundMax (sound card) Bluetooth Audio (bluetooth server) BlueTooth High quality audio (bluetooth server) Out of the 4, I have logitech enabled in the record area (which isn't the right thing as the camera doesn't work anymore...jeez, found something that I need to fix on my PC now...)

Mar 11, 2007 | KWorld DV/AV Expert TV Stereo...

1 Answer

[MSI 8606 TV Tuner Card] Can't get a picture


here is a link for the driver, http://drivers.softpedia.com/get/TV-Tuner-Co/Others/MSI-TV-Tuner-Master-8606-WDM-279165.shtml

Mar 10, 2007 | MSI 8606-020

Not finding what you are looking for?
Sabrent TV-PCIRC (TVPCIRC) Video Capture Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sabrent TV Accessories Experts

Sudeep Chatterjee
Sudeep Chatterjee

Level 3 Expert

3267 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Cindy Wells

Level 3 Expert

4751 Answers

Are you a Sabrent TV Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...