Question about Flat Panel Televisions

Open Question

Time-Warner remote Synergy V model RT-U60c with Pioneer PDP-5020 Plasma

The codes Time Warner Synergy V model RT-U60C gives me in it's instructions book do not work with the new Pioneer PDP-5020FD and the new Pioneer BDP-51 Blu-Ray player. The codes they give me are 111, 144, and 383.

Posted by on

  • 1 more comment 
  • Anonymous Nov 08, 2008

    Synergy V model RT-U63cp with Pioneer PDP 5020 plasma. I need a code the codes they provided in the manual don't work.

  • buellrick Apr 06, 2009

    Codes listed for remote (111, 144, 383) do not work with Pioneer 5020. Time Warner rep says out of luck. Anyone have a working code for this?

  • not0 May 19, 2009

    Same issue with me . I have Dish network remote and cannot control the Pioneer 5020 Kuro either.

×

3 Suggested Answers

0RazR0
  • 100 Answers

SOURCE: what is the code for a vizio gv47L to be operated

You may have already figured out the answer since its been two months after you asked the question. These are the universal codes for Vizio TVs... you have to try all of them and find out which one works.

3 Digit codes: 004, 502, 627
4 Digit codes: 0178, 1758, 0128, 1017
5 Digit codes: 10864, 01376, 00476, 00810, 00276, 01187, 01254

Hope that helps.

Posted on Apr 09, 2010

  • 1 Answer

SOURCE: Need to program my synergy v time warner remote to

STEP 1: PRESS THE MODE BUTTON ON THE TOP OF THE REMOTE, THEN PRESS TV STEP 2: PRESS AND HOLD THE "SEL" BUTTON AND THESH "MUTE" BUTTON AT THE SAME TIME UNTIL THE BUTTONS ON THE TOP ARE LIGHTING UP IN SEQUENCE FROM RIGHT TO LEFT STEP 3: HOLD THE CHANNEL UP BUTTON UNTIL YOUR TV TURNS OFF. WHEN THE TV TURNS OFF HOLD THE CHANNEL DOWN BUTTON UNTIL YOUR TV IS BACK ON AND ALL LIGHTS ON TOP FLASH AT THE SAME TIME

Posted on Sep 24, 2010

  • 1 Answer

SOURCE: My parents bought a Pioneer

I have the same TV my parents gave me and I am wondering the same thing..

Posted on Jan 15, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Find activation code for pioneer


My pioneer 5020FD Kuro tv. when I plug power to the unit, a blue light blinks 8 times pause 2 sec. and blink 8 times repeating this and if i press power button it clicks red light and makes a clicking sound and goes back to the blue light blinking again, it did this once before and the picture came on fine until i turned it off and now it just blink the blue code.

Dec 10, 2014 | Pioneer PDP-5020FD 50 in. Plasma HDTV

1 Answer

How do i connect head phones to pioneer pdp 5071pu TV


This model has no headphone out put. In the rear panel there are two monitor audio outputs which could drive headphones, but I think the volume output to a possible monitor matches the tv loudspeaker output, and may not turn off the audio separately.

Mar 09, 2014 | Pioneer PDP-5020FD 50 in. Plasma HDTV

1 Answer

PIONEER TV RED LIGHTS


Hi Miquel.

If the unit does not start but stays in standby with the red light on, then the TV is in forced standby mode because an internal problem has been detected.

Try disconnecting power cord for ten minutes. If that does not help, then the TV must be tested and repaired.

Regards.

Ginko

Dec 02, 2011 | Pioneer PDP-5020FD 50 in. Plasma HDTV

1 Answer

No power to tv


If there is no power to tv, remove rear panel and check the fuse. If the fuse is good, the power supply will need to be replaced

Jul 09, 2009 | Pioneer PDP-5020FD 50 in. Plasma HDTV

1 Answer

The screen has a crack in it too


If the screen is cracked, sorry to tell you but you need to replace the entire screen. If it is under warranty contact the manufacturer to find some cost effective options. Replacing the screen may be almost as expensive as buying a whole new TV of the same model.

Jun 05, 2009 | Pioneer PDP-5020FD 50 in. Plasma HDTV

1 Answer

My brandnew Pioneer PDP-5020FD won't turn on.


Check page 9 of this document:

http://www.pioneerelectronics.com/StaticFiles/Manuals/Home/PDP-5020FD_OperatingInstructions0610.pdf

You will see that there is a power button on the bottom right corner of the back of the unit (item 25). Turn the unit on using that first.

Mar 17, 2009 | Pioneer PDP-5020FD 50 in. Plasma HDTV

Not finding what you are looking for?
Flat Panel Televisions Logo

Related Topics:

1,911 people viewed this question

Ask a Question

Usually answered in minutes!

Top Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

68301 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...