Question about DVD & Blu-Ray Players

4 Answers

Cannot activate my 321 Studio Software being DVD X-Copy Platimum Original and Burn Express in my DVD EXTreme Software Original. I have my Original software License and Key.

Posted by on

  • bwintersone Sep 12, 2008

    I am positively sure that my DVD XCopy Platinum is Authentic as well as my DVD EXTreme Software Because it was ordered Straight from the 321 Studio before they were shut down. I changed computers since then and now I cannot reativate my software. As I said before my original Ativation Key and License still does not work ! I believe it is because the telephone number to activate is shut down as well. Need a Number to activate my software without someone trying to sell my this software over again and again.

  • bwintersone Sep 12, 2008

    Reinstalling Does Not Solve This Problem Please Read My Prior Reponse Changed Computers therefore I had To Reinstall this Software with no avail. There is a way to activate and support for this problem I heard but no one has sent me the solution yet.

×

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 983 Answers

That s because posting the cracked serial numbers are not allowed in the terms and conditions of the fixya ... we are maintaining antipiracy in fixya ....

so if your software is the genuine product then you must contact the dealer of that product or the seller of the product or the customer care of the product they will get you back the license key if you have purchased that ...

thank you
rate my solution

Posted on Sep 12, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • DVD & Blu-Ra... Master
  • 19,396 Answers

If you cannot activate it, then your licence had been stolen. Do customer login here, contact them. Or contact the softwarehouse by calling the number that came in software documentation.

Often licences are stolen even before the product is being sold.

Posted on Sep 12, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,952 Answers

Reinstall and try

Posted on Sep 12, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • DVD & Blu-Ra... Master
  • 13,433 Answers

Authentic DVDXCopy software is no longer being sold anywhere. Genuine DVDXCopy software should ONLY require a license ID and password to activate. If you are experiencing operating system failure or other technical issues relating to a DVDXCopy "activation server file", "patch" or "activation CD", contact the seller directly for an immediate refund as this indicates a cracked version of the product.

Taken directly from http://www.dvdxcopy.com/ Please read the bottom of the page



Posted on Sep 12, 2008

  • 1 more comment 
  • Ekse Sep 12, 2008

    (bottom of the page at www.dvdxcopy.com)

  • Ekse Sep 12, 2008

    I suppose the only solution then would be to download a crack to the program but we can't post such things here.



    google

  • Ekse Sep 12, 2008

    As the activation servers don't exist, the phone lines don't exist.. The only way around this would be to get somekind of a activation crack for the program. Not sure if I'm in violation of the tos by saying that. but there is noting legal we can do about it.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to copy VCR to DVD on Sanyo DVR V100E


Try Googling (Sanyo)(DVR V100E)(manual) without parens to get instructions.

Sep 19, 2016 | Sanyo DVD & Blu-Ray Players

1 Answer

How can I copy from vcr to dvd without aremote


As for such situation, you may need a DVD Creator.

Leawo DVD Creator can convert video and burn video to DVD-5/DVD-9 content with abundant DIY features to customize DVD movies.
  • Create DVD-5/DVD-9 disc, folder or ISO image files from recorded videos, online videos and other videos;
  • Preset 40+ disc menu and template models for DVD burning, even allow DIY disc menu and template;
  • Convert 2D video to both 3D and 2D DVD movies, with 6 different 3D effects available for choice;
  • Practical and user-friendly video editing features to get customized DVD movies;
  • Fast DVD burning via Intel Quick Sync accelerating technology;
Besides, if it is necessary, you can also use Leawo DVD Copy which can help you copy and backup DVD discs, DVD folders and ISO Image Files to PC or disc, with marvelous bonus features.
  • Copy DVD to DVD disc, file folder and ISO Image File with no quality loss;
  • 1:1 disc to disc duplication while retain original disc quality;
  • Copy DVD-9 to DVD-9, DVD-5 to DVD-5, and even compress DVD-9 to DVD-5 with high quality;
  • Copy DVD contents in different copy modes: Full Movie, Main Movie and Custom Mode;
  • Copy and backup CSS-DVD discs and common DVD discs easily;


Easy to Convert Any Videos to DVD Disc Leawo DVD Copy Software Clone Copy DVD movie to DVD RW disc or hard drive...

Sep 19, 2016 | DVD & Blu-Ray Players

1 Answer

Need a decoder for toshiba dr570ku to make backup copy


You can make a copy of any and all protected or copy written material.
You are allowed by law to make ONE ONLY! Upload DVD or whatever to your PC. Make an IMAGE of it on your PC then burn the IMAGE of it to disc. It will be identical to the original containing all copywrite protection. It is just like making a backup of your hard drive, being a virtual "IMAGE" of the original.

Sep 03, 2012 | Toshiba DVD & Blu-Ray Players

1 Answer

I can not play my dvd on sony dvd player i get message canot play.i have a sony dvd recorder in which my laproscopic surgeries are recorded.if i play my unedited dvd on player it runs or plays very well...


My guess is the Pinnacle software isn't writing correctly. Read this from the Pinnacle support site.

Use this FAQ to troubleshoot any problems where Studio is failing during the process of burning the DVD.


  1. INSTALL THE LASTEST PATCH:

If you have Studio version 12, download the latest version here.

If you have Studio version 11, download the latest version here.


Note: Studio 11 patches will only patch a previous install of Studio 11.


If you have an older version of Studio (Studio 9, 10, or 11 etc), it is advised for you to update to the current Studio software. The current version is Studio 12. Click Here to go to the Studio 12 Upgrade page.


How to download and install a patch:

  • When downloading the patch make a note of where it is being saved to. We recommend saving the patch to the desktop.
  • Before installing the patch, make sure that you do not have any other programs running. Studio must not be running.
  • Once it is fully downloaded, double-click on the patch to begin the installation.
  • Follow any on-screen prompts to complete the installation. Reboot the computer after applying the patch.


  1. MAKE DISC SETTING, SAFE MODE BURN OPTION: In Studio, click on Setup -> Make Disc. Under the box marked Burn Options, select "Safe Mode: create disc content and then burn" by clicking on the radio button in front of the setting and then click OK. While troubleshooting this problem, always use this setting.


  1. RESTART STUDIO: Shut down Studio, then relaunch it. Try to create the DVD again using the safe mode setting above.


  1. RESTART THE COMPUTER: Try opening the door of the DVD burner. If it won't open, then shut down Studio, then restart the computer. Launch Studio and try to create the DVD again using the safe mode setting.


  1. MEDIA:


BLANK MEDIA IN THE DRIVE: Make sure that there is a blank, write-once media or rewriteable media in the DVD burner.

TYPE OF DVD: Make sure that your DVD burner supports the media you use. As for any problem with burning a DVD, we recommend customer use rewriteable media to reduce the number of wasted DVDs when they have to troubleshoot a failure while burning DVDs. In this case, if you have only used rewriteable media, (RW) we would also recommend trying to use a write once (-/+ R) DVD and erasing the RW media.

BRAND OF DVD: Pinnacle recommends using a name brand of DVD, i.e. Sony, Apple, Memorex, etc. Also we recommend trying a DVD from a different manufacturer to see if the problem is related to the brand of DVD that is being used.

NOTE: Check with the following site to find information on the media being used.


http://www.videohelp.com/dvdmedia


  1. LOWER THE WRITE SPEED: In the Make Disc settings try lowering the Write Speed to the lowest possible setting.


  1. GET THE LATEST FIRMWARE: Ensure that the DVD burner being used has the latest firmware update from the burner manufacturer.


  1. CHECK DISC SPEED: Make sure that the disc media speed (printed on the media or on the media box) is compatible with the DVD burner. Some burners may not work with media that has a higher maximum supported burn speed. For example, if the burner being used supports 4x disc media, do not use 16x disc media.


  1. DELETE AUXILIARY FILES: Try deleting the Auxiliary Files for the current project. To do this, go to File -> Delete Auxiliary Files and select "Delete auxiliary files for current project." Press OK and try to re-render and burn the project.


  1. ALWAYS RE-ENCODE: Go to the Make Disc settings and check the box called "Always re-encode entire movie".


  1. SAFE MODE: Try burning with the safe mode option selected. To do this, go to the Make Disc settings. In the Burn options are select the option called: "Safe mode: create disc content and then burn.". This step does not apply if you are using Studio 12 since this is the default burn method.


  1. CREATE A DISC IMAGE: In Studio, click on Setup -> Make Disc. Under the box marked Burn Options, select "Create disc content but don't burn" by clicking on the radio button in front of the setting and then click OK. Then click the Create disc button in the Make Movie section to begin the image creation process.

    If the image is not created, it is likely that the problem is a Render problem rather than a burn problem. Click Here to see the FAQ on Render problems.

    If the disc image file is created successfully, burn the disc from the new disc image by selecting "Burn from previously created disc content" in Burn Options.

    NOTE: When troubleshooting all burn or playback issues, it is recommended to use rewritable media to avoid wasting discs.


Nov 04, 2010 | Sony DVP-NS530 DVD Player

1 Answer

I need to convert VHS to DVD


Hey!
You can use a video to dvd burner software which can help you convert your VHS' to DVD's. You can have a try of this Wondershare DVD Converter Studio which can help you burn DVD from VHS'. For more detailed info, you can get it at: http://www.dvd-ripper-copy.com/dvd-converter-studio.html#181.

Sep 07, 2009 | Samsung DVD-V3650 DVD Player/VCR

2 Answers

Want to copy vhs to dvd


just play your movies from vhs iput your audio/video to computer with TV CARD and video input. then record it and burn to DVD format after recording.

May 26, 2009 | Panasonic DMR-ES25 DVD Recorder

1 Answer

Trying to copy my videos to dvd's. Seem to be copying but blank dvd when done. I need this for Christmas, My husband used to do it and now he is deceased. Thank you


This is more then likely due to the "burning" software you are using. I personally recommend Ashampoo Burning Studio you can download a full version Right Here Completely free.

After you have that installed just click on > Burn Movies > Create a Video DVD > Just "Drag and Drop" the Video Files you want to Burn then when you are done adding your Video Files Click > Next > Choose and Appropriate Theme > Click Next Again > Insert a Blank DVD R > Click Write !

Just sit back and relax Ashampoo will do the rest.

I wish you the best and a Happy Holiday Season!

I hope this Helps you. Take Care =)

Dec 08, 2008 | Lite On DVD & Blu-Ray Players

2 Answers

Burned dvds wont play on home player


i have begun having a problem with my  4-5 year old bose 321 system.  sometimes dvd's burned on my computer will not  play on my bose 321 system.  sometimes they will.  what's up with this?  it's not a bad media problem.  i've narrowed it to the player.  sometimes i'll play a computer burned dvd on the bose and it will play fine.   next time i try to  play it it won't any ideas? thank you in advance mike

Dec 04, 2008 | DVD & Blu-Ray Players

1 Answer

Can't play dvd-r or dvd+r


try to buy and play original dvd movies. when it play, it is how you burn your dvd, use some software which will automatically create dvd movies so you can play to your DVD player.. If not, try to clean DVD lens using lens cleaner. usually used DVDr will not play to DVD player.. try also to use new blank DVD

Aug 26, 2007 | Toshiba SD-1800 DVD Player

Not finding what you are looking for?
DVD & Blu-Ray Players Logo

Related Topics:

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top DVD & Blu-Ray Players Experts

kakima

Level 3 Expert

96627 Answers

The Knight
The Knight

Level 3 Expert

68352 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...