Question about Whirlpool Washing Machines

1 Answer

We have a Whirlpool Gold Ultimate Care II Washing Machine. Washer will fill with water, but when it tries to go to another cycle you just hear a loud rumbling noise and the basket will not spin.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 750 Answers

Peace jjones16 ,
huuum At your service!

You have a Whirlpool Gold Ultimate Care II Washing Machine. And the washer will fill with water, but when it tries to go to another cycle you just hear a loud rumbling noise and the basket will not spin?
Correct?

So!

Sounds like the coupling connecting the transmission to the agitator is worn out!
If I were there hands on I could be definite.
But it sounds like you need this replaced!
Thank God it's not the transmission.
When a transmission goes out of warranty, it;s not worth putting good money into bad! They are just to expensive a repair!

Only a hands on laundry tech can make the diagnoses.
This time you should call service
Let me know what is the final results.
Please write me back.

How old is the washer??????????????

If the appliance is 10 years old or more you it may not be advisable to put good money into bad!
New appliances are so much more efficient today that they can save you a lot of money in energy!
Water,Electric and detergent! And put money back in your pocket!
The new appliance will pay for itself in only a few years!



Bless You,
huuum

Please give me a good rating before you sign off.
Thank You

Posted on Sep 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On rinse cycle...cannot control water temperature...set it for warm but still feels cold to touch. wash cycle is ok. model is whirlpool gold ultimate care II..top loader.


Is the hot water turned on. Remove hose from washer and check screen in water inlet. If it is clear you may need a new water inlet valve.

Apr 01, 2011 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

My machine fills with water but does not spin


This is a good washing machine and we can help you get it repaired and working properly again.
We provide free diagnostic information when you tell us what brand and model number you are having issues with.
We are available from 7 AM – 7 PM CST.
We also provide part removal/installation instructions for our customers when parts are purchased through us.
It is our goal to get you back up and running again ASAP, so please contact us when you need us to help you.
We look forward to hearing you and hope that you get your appliance problems resolved soon.
Thank you, Ella
http://www.fixya.com/repair/d499389-accurate_appliance_repair_service

Mar 11, 2010 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Whirlpool ultimate care II stops after filling


Hi, could be faulty timer, faulty water level switch, faulty start capacitor for motor, or faulty motor. always put clothes in machine before starting. you can empty machine by lowering drain hose to flow level.

Aug 02, 2009 | Whirlpool Ultimate Care II GSW9650LW Top...

1 Answer

Whirlpool washer has begun to make a loud buzzing sound when the


This machine has an end-of-cycle buzzer built in. It may be that it just started working.

Dec 31, 2008 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

Whirlpool Ultimate Care II keeps taking water.


ck your drain nose/drainline, chances are you have along hose, perhaps even draining along the floor behind hte unit, into a "closed" drain system. in which cawee the wwater is syphoning out during the rinse cycle, youlll needt o raise the drain hose to above 48" and have it drain into a stand pipe to prevent siphoning effect

Nov 19, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Washing machine will not cycle


I have a Whirlpool Ultimate Care II. My washing machine would not cycle once it filled with water. I purchased a lid switch from partselect.com. The installation took five minutes. This corrected the problem. I hope this helps.

Nov 05, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Washer will not Spin during SPIN CYCLES


Thanks for the question If your washer sorta spins and washes ok, your problem is with the transmissionTHanks for your question THe Appliance doc

Jul 29, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...