Question about Kenwood Audio Players & Recorders

Open Question

Remote RC-RO407 will not operate our audio video surround receiver. Batteries are fine is there someway to unfreeze the remote? We reset the receiver by doing what the book advised. Is there anything we can do?

Posted by on

5 Suggested Answers

  • 1 Answer

SOURCE: learned/tx function on remote

rc-825-
your remote is in learn mode..
on lt top corner is green learn button
press itw/ apaperclip...
this will take it out/put it in learn mode

if you have a manual for the avr-3200,
i'd love it if you could help me out by scanning it and sending me a pdf copy..
i've lost mine and really need it right now..

Posted on Oct 18, 2008

  • 1550 Answers

SOURCE: Remote rc 1030

The sensor in remote is not working .
If you have any other universal remote try to access the receiver .

Posted on Oct 31, 2008

  • 1 Answer

SOURCE: Onkyo remote won't control Samsung components.

I got an Onkyo RC-717M remote control. It is the remote that comes with the Onkyo TX-SR706 receiver. It is a learning remote. When i entered the cde for the Samsung Blu-Ray it did the same thing as the other remotes I got from Onkyo, the pause, next / previous track buttons wouldn't work for the Samsung BD-P3600. I used the learning function of the new remote and programmed it to work. It works ok now but it sure was a hassle to get it done. In fairness i should have called Onkyo support but their support hours don't match my schedule.

Posted on Sep 13, 2009

  • 1 Answer

SOURCE: Can I Get a Kenwood RC-R0608 Remote to work with a Kenwood VR-206 A/V Reciever

i WILL BUY YOUR Kenwood RC-R0608 Remote
rlupton@atral.com

Posted on Jul 28, 2010

SOURCE: I really find it difficult

Hi rickycaluen,

I see that your are in a dilema on which to choose from IR or Surorund and can't use the system as you wanted.

First Choose Surround then the rest should be OK since the only function that you wanted is to turn the system ON and OFF and to be able to use the control for Volume function.

To synce the remote control you will need to find the code to enter on the control while poitning to the device to sync it.

That code should be on the Users maual that you have.

I hope this helps.

Have nice day,

mvincentc

Posted on May 15, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can you use an Onkyo RC-771M remote control to operate Onkyo receiver TX-SR502 ?


Unfortunately, the RC-771M remote doesn't control the TX-SR502. It will only work with these Onkyo models: TX-NR1008 and TX-NR808. The RC-567M is the one for the TX-SR502; replacement remotes that are exact replacements are still available from various places including Amazon.com .

Since the TX-SR502 was released in ~2004, that replacement remote probably won't control other devices that were released in 2004 or later. Onkyo changed its IR code programming before the TX-NR1008 was released in ~2010 and the RC-771M can't communicate with the older receiver. The manuals for the receivers listed above are still available from Onkyo on the product page under the Downloads tab.

I wish that I had better news for you.

Cindy Wells

Jan 31, 2016 | Onkyo TX-SR502 Receiver

2 Answers

Remote rc 1030


it must be your remote has been broken (just like my remote on tv) better to buy a new remote or buy a universal remote control.

thank you for using fixya
CHARCOIS

Oct 31, 2008 | Denon AVR-2807 Receiver

Tip

Onkyo RC-682M Remote Codes


Download Onkyo RC-682M Remote Codes
4 Digit Onkyo Remote Codes

Models: RC-682M / TX-SR605 / TX-SA605 / TX-SA8560

6ccdda6.gif

Have you misplaced your Onkyo RC-682M Remote Owners Manual?

Would you like a digital, searchable, pdf version of the Onkyo RC-682M Remote Users Guide?

Follow this link to download a pdf version of the operations manual.

I hope that helps.
_________________________________________
Download Onkyo TX-SR605 Users Manual Here.

on Apr 20, 2010 | Onkyo TX-SR605 Receiver

1 Answer

How to reset RC-569M remote controller to factory defaults.


Not sure if it's the same, but for the Onkyo RC-799M controller the reset sequence is:

To reset the remote controller to its factory defaults,
while holding down RECEIVER, press and hold down
HOME until the remote indicator lights (about 3
seconds). Within 30 seconds, press RECEIVER
again.

Jan 05, 2015 | Onkyo Audio Players & Recorders

1 Answer

Remote RC-R0511 doesn't work and don't know why


Get a Logitech universal remote, and never look back.

Sep 05, 2014 | Kenwood Rc-r0511 Home Theater Receiver...

2 Answers

Learned/tx function on remote


Hi cshunter34

I couldn't locate any info on your remote, but the usual reset solution if by depressing a reset button that may look like the type your press with a ballpoint pen. check the back and under the battery cover also. If you cant find one, then take the batteries out and leave it overnight and then put them back in the following day and see what happens. If all this fails, please let me know and we can try some more options.

regards
robotek

Sep 02, 2008 | Audio Players & Recorders

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

sonic boom...
sonic boom...

Level 3 Expert

1557 Answers

Are you a Kenwood Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...