Question about Memorex (32023292) DVD±RW Dual Layer Burner

1 Answer

Memorex dvd burner

I just got my first dvd burner. but I can't get it to burn faster than 1x

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has answered 200 questions.


    An expert whose answer got voted for 20 times.

  • Expert
  • 277 Answers
Re: memorex dvd burner

Hi the problem (for your sake) is software you need to configure your software for MAX burning speed it depends on what program your using go to options - burning - .... good luck

Posted on May 08, 2006

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Unable to push Sony Optiarc AD-7585H to write at 1x

You're not "pushing" with 1x speed, that's the slowest speed at which a burner will burn at. You can change the write speed in the burning software settings.

Nov 09, 2013 | Sony Optiarc AD-7260S - DVDRW (R DL) /...

1 Answer

The DVD Burner will not burn a Memorex DVD - R . Should I purchase Verbatum or Memorex for an older model MSI DVD Burner? Or, Should I purchase Verbatum or Memorex for an older model Samsung TS H652...

You are on the right track. Every "multi-format" DVD recorder, DVD burner and DVD-RW drive I have ever owned has had problems with one type of media or another. This is because the discs all have their own patented dye mixtures, and each is a little bit different.

I have problems using Memorex DVD-R discs on my Toshiba DVD recorder. The only drive I can get good results with Memorex DVD-R's is on my Memorex DVD drive.

For DVD-R media, I have had the best success with TDK DVD-R's.So far, they have worked on all my devices.

You may want to try DVD+R media. I use Memorex Lightscribe DVD+R and for dual layer recording, I use Ativa DVD+R DL discs, both of which have worked very well and I rarely have to throw one away.

It takes allot longer, but on my PC I always use the "verify" function to make sure I get a good copy.

Feb 17, 2011 | Samsung TS-H653F DVD±RW Dual Layer Burner

1 Answer

Do I need a new driver to use Memorex DVD-R 16X on my Samsung CD-R/W SW-212B, and if so where can I get a download for it? Thanks; Bob.

Hey Bob if your Samsung is a CD-R/W burner and not a DVD burner then you will not be able to burn the DVD's you will need to upgrade to a DVD Burner, also with the CD's you will need to check that your CD burner is compatible with that type of disc,

Jan 11, 2010 | Memorex CD & DVD Burners

1 Answer

Hello my samsung sh-s182 dvd -+rw doual very slow burn

First look and see the write speed of the drive. 1x to 4x is slow but recommended by all programs and this is initially the default settings for most programs. You must goto the settings of your dvd burning program and set the burn rate to 16x or higher.

Sep 25, 2009 | Samsung SH-S182 DVD±RW Dual Layer Burner

1 Answer

What BRANDS are compatable w/ HL-DT-ST DVD+-RW GSA-T21N?

I hate to say it but memorex are the worst quality,the reason is that the drive's laser will try to adjust its power upward to burn the disk-optimum power calibration(OPC).Some burner programs display this . I have tried over 8 packets of different memorex media and results are poor ,one in five are coasters .I suspect memorex media will destroy drive lasers as running laser at top power isn't good for its life .I hate to recomend brands but tayo uden,verbatim and sony are good media but not as cheap as memorex but more cost effective!

Mar 10, 2009 | ASUS DRW-2014L1T DVD-RAM Burner

1 Answer

Low burn speed

I had the same problem before upgrading my RAM. Seems video burning software like nero are RAM hogs; if you do not have a large amount of RAM then it slowers the burning speed down to a crawl.[ BTW I didn't get maximum burning speeds using nero on a Windows Vista computer until I upgraded to 2 GB RAM] Hope this helps & please remember to rate my answer.

Dec 31, 2008 | Pioneer DVR-111D (DVR111DBK) DVD RW Dual...

1 Answer

Couldn't format and burn the DVD+RW

It could be a problem of the version you are using with Nero 7, try upgrading. It also could be that you are try to burn the DVD RW at a speed it cannot be burned (say 4x), try burning it at 2x.
Hope this works!

Feb 18, 2008 | KHypermedia (KDVRW8X) (20730176) DVD+RW...

1 Answer

Problem with DVD + R

If your product was made before july 2007 you could try the firmware offered here on the lite-on website. Download the firmware zip file and extract then run the exe file inside.

Jan 15, 2008 | Lite On LH-18A1P DVD RW Dual Layer Burner

1 Answer



I have the same issue with the LG GSA-H20L and the LG GSA-42N, but mine was with TDK DVDs.

I contacted LG Support and they told me that TDK disks are not recommended for use with their DVD Burners.

I asked them if there were any others they did not reccomend and they said no.

Going through my cupboard, I found Memorex Printable DVD-Rs that will burn OK.

I also tried Sony DVD+R and a generic brand, but they will not burn either.

I also found that these LG drives do not recognise Laser CD-R.

In short, for burning, try either Memorex, LG and some others, but don't try TDK, Sony or Laser.

Good Luck

// '); }// ]]>

Jan 13, 2008 | LG GSA-H42N 18xDVD+-R, 12xDVD-RAM,...

Not finding what you are looking for?
Memorex (32023292) DVD±RW Dual Layer Burner Logo

Related Topics:

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Memorex CD & DVD Burners Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Cosma Papouis
Cosma Papouis

Level 3 Expert

404 Answers

NewYork kyocera HP...

Level 3 Expert

513 Answers

Are you a Memorex CD and DVD Burner Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides