Question about Microsoft Windows XP Professional With Servise Pack 2 (e8503040) for PC

1 Answer

LAN problem possibly due to virus.

Resp Sir,
I tried to solutions i.e. to search for the ip of the computer from run command and to ping for ip address.
But it is not working.
i think it is virus.
Please help me Sir.
My problem was......
Resp. Sir,
i have a small internet cafe *** game centre and am facing a virus problem. The symptoms are that - Internet is working ok ( I am using an external modem and a hub) but when i try to use my network places to copy files from one computer to another, it is not working. Some pcs are seen disappered from lan and though some are seen lan permission related message is comming. My Seagate firewall settings are ok. I use avg and ad aware. All drives are shared.
Pl tell me solution.
The problem is solved before when i had formatted hard disk ( erased). But i do not want to do formatting each and every time if i get a good solution.
Pl. pl. pl. help.....

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 167 Answers

Hi,
I work over a 2 years in internet cafe. I was system administrator! The best way is to create clone's backup. I assume that machine is the same. Do fresh installation on one computer, when you finished create ghost of that computer and use it for further. And another thing, on your server go in manage device and setup permission and protocol for each machine. And be ware that your machine will always have some virus. It's impossible to protect 100%.
Regards and good luck

Posted on Sep 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to connect to internet in redhat enterprise linux manually


1) Open a command prompt (or terminal, under System Tools)
2) Verify your system default route (route -n)
a) Does route 0.0.0.0/0 exist?
1) Does it have a gateway IP address similar to that of your cable company? If so, try 'ping 8.8.8.8'
2) Is the gateway IP address similar to 192.168.x.x? If so, you have a local router. Verify that you can 'ping 8.8.8.8'. If not, try to ping your router IP address.
3) If still unsuccessful, verify your IP address.

Jun 17, 2012 | Red Hat Enterprise Linux ES Basic Edition

3 Answers

A windows firewall is blocking my internet access. It keeps saying check the connection for HTTPport(80) HTTPS port(443) FTPport(21). How do I solve this? Also I can't download anything in safe mode which...


First check if your IP and your DNS are automatically obtained

1. Click Start>Control Panel
2. In classic view open the icon for network connections
3. Right Click on the icon for Local Area Connection and choose properties
4. In the local area connection properties window click on Internet Protocol (TCP/IP), and then click on properties
5. In the next window that opened make sure that Obtain IP address automatically and Obtain DNS address automatically both have the green button on them, click apply and then click ok

You can further optimize your browser setting by doing the following:

1. In the control panel window open the icon for internet options (make sure that there is an entry for your homepage section. if you don't have any try putting www.google.com or any website you prefer IE to load upon opening)
2. Click on the security tab
3. Look into the part where it says security level for this zone and find the default level button, click on it
4. Go to the privacy tab click also on the default button
5. Go to the connections tab, look for the button for LAN Settings, click on it
6. Under the lan settings window make sure that Automatically Detect settings is the only item checked...
7. Go to the advanced tab and click on the Restore Defaults button
8. Click apply and OK
9. Close your internet explorer browser and reopen it, your default home page should load automatically

Dec 29, 2009 | Microsoft Windows XP Home Edition

1 Answer

Can't ping Default Gateway (XP) From Windows 7


Make sure you are receiving a proper IP address from the DHCP server....If you run a cmd prompt (windows icon, type cmd and hit eneter, then ipconfig) you should see a 192.168.0.x address. If not, go to the control panel, network connections, manage network connections, and be sure that TCP/IP (V4) is set as auto-configure....


If you are sharing the connection through an XP computer, you will need to run the Internet and connection sharing Wizard on the XP computer, and transfger the settings on a disk to the Windows 7 PC. A simpler solution (assuming you are on a cable/dsl connection would to be to go to your local big box store and buy an Internet/Firewall router. It would also increase your security.

Dec 28, 2009 | Microsoft Windows Vista Ultimate Edition

1 Answer

I have my new myfi 2200 cannot connet to my computer gives me a message page cannot be diplsyed


go to command prompt and type IPCONFIG

if you see any ip address assigned manually or automatically

it should be like 192.168.x.x

then try to ping the gateway accordingly
just type ping 192.168.x.x -t

if nothing appears that mean there is problem with your lan card...

Right click on my computer >> properties>>hardware>>device manager

under the network adaptor list check whether the lan card is installed or not...

if it is installed but still getting no where then assign the ip address manually..

To assign IP manually right click networking icon with two moniters that appears near the clock >> status >> properties >> double click internet protocol(TCP/IP) >> assign the IP manually as follows

IP >>>192.168.1.100
SUBNET MASK 255.255.255.0
GATEWAY >> 192.168.1.1

click ok ok ok

now try to access your wifi

Nov 08, 2009 | Microsoft Windows XP Professional With...

1 Answer

How to connect windows xp and vista by lan using crossover cabel please post full steps


Here are the steps to connect two PCs using a lan cable (crossover)--

1. Be sure that both computers are logged in to Windows.
2. Connect each end of the cat5 crossover cables in to the network cards of each computer.
3. Bootup both computers and sign them both on to Windows.
4. In order for both PC's to be able to communicate together, the Ethernet adapters will need to be configured with a static IP address and a common Subnet mask. As an example, assign one PC an IP address of 192.198.0.1 and assign the second PC an IP address of 192.198.0.2. Both machines should use the Subnet mask 255.255.255.0. Here's how to configure your Network Card: Go to Start>> Control Panel>> Network Connections>> Right click your Local Area Connection and select Properties. Scroll the list for the entry titled: Internet Protocol (TCP/IP). Click the entry and select Properties. Under the General tab, tick the box titled: Use the following IP address. Enter the IP address and Subnet mask that you would like to use. Repeat the steps above for the second computer system.
5. Be sure that both PC's have a common workgroup name of 15 characters or less. Here's how: Go to Start>> Control Panel>>System. Select the Computer Name tab. Click the Change button. Change the Workgroup name. Repeat these instructions on the second computer ensuring that both computers are named exactly the same.
6. Reboot both computer systems.
7. Next, open a command prompt on one of the computers by going to Start>>Run. Type in: command [Enter] or click OK.
8. Type: ping 192.198.0.2 (if you are using the computer assigned with 192.198.0.1) press Enter.
9. Five replies to your ping should be indicated.
10. Once you get the two computers to communicate successfully together, you can now enjoy the benefits of file sharing, printer sharing and Internet connection sharing.

Jun 24, 2009 | Microsoft Windows Vista Ultimate Edition

1 Answer

How to connect a laptop having vista home basic with a xp desktop


Be advised that,
it makes not different to connect one PC/Laptop to another one via LAN because when you connect your system in lan networking you system will be automatically detected if LAN has been set up through a server.
And if not you need to do manually by assigning ID address on bot PC/Laptop.
For that,
first assign an IP address in either Laptop or desktop (IP address must be same category)
ex.
192.168.1.231 (first one)
and second one should be
192.168.1.here you can up (instead of 231) any number excep 0 but make sure not confliction between other system. means not duplication IP address on same LAN.
once you ae done with IP assigning
Go to
Star>Run>command and hit enter
once you see command prompt then
type there:
ipconfig and hit enter (it shows your ip address) if you wanna have more info then type ipconfig/all
once you are done with this then
you need to ping to your next PC.
for that
type in
ping 192.168.1.231 (means you need to type another PC's IP address here)
and hit etner
if you see like on image
then you are good to go.

636656f.jpg

Thank you
and rate all answers.







Jan 02, 2009 | Microsoft Windows Vista Home Premium with...

1 Answer

Virus


Try to map the IP of the computer you are trying to access
Click run>type \\IP of the computer the click ok. If this will not work, try to ping the IP of the computer see if the computer is accessible tru ping.

Sep 11, 2008 | Microsoft Windows XP Professional With...

2 Answers

Windows2003 server networking problem


if the pc mother board came with a driver, install network driver/speed.make sure your network card are working very well and you can fastening the speed of the modem before querying it

Jan 31, 2008 | Microsoft Windows Server Standard 2003 for...

Not finding what you are looking for?
Microsoft Windows XP Professional With Servise Pack 2 (e8503040) for PC Logo

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Operating Systems Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Scott Fryer

Level 2 Expert

80 Answers

Alex Krenvalk

Level 2 Expert

401 Answers

Are you a Microsoft Operating System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...