News ticker off bottom of screen, how to adjust?

if your tv have resolution setting,try to lower that

Make sure you are in the correct input. Did the installer connect the cable box to the television in two places? If so you'll want to choose the correct input of the two. Also make sure your cable box is set to the correct resolution for your television set i.e. if you have a 720p set it to 720p not 1080i and vice versa. Look for an hd zoom# button or format button or aspect button on your cable or satellite remote to adjust the picture size. If it is not on the remote the picture adjustment setting is in the menu/setup of your cable box or satellite box.

NEED TO REPLACE THE BOARD OF CONVERGENCE

This is applicable to Bell Television Services (Canada)
I solved the problem myself after two calls to both Zenith and Bell Television satellite service. On the bottom left of the Bell remote control there is a * (STAR BUTTON). Press this * button and within two seconds you must press the channel change button up or down. This will do two things. One; it changes the channel; and also changes the ratio of the satellite signal. There are three satellite signal ratio settings. Try this when you are tuned to a TV channel such as BNN (Canada) (Business News) or The American channel which has a stock ticker usually displayed along the bottom of the TV screen. Select the ratio (setting) that allows the stock ticker to be displayed......hope this helps.........Jim McP

you need to press the aspect ratio button to change the view is should bring up the news ticker into view if you have your view set to smart try pressing up on the d-pad in the middle of the remote

**** man, i have the same problem, sucks in video games where the objective is shown at the top of the screen and i can only see the bottom half of the text.

without going to hd, contrast to full, color, tint and brightness to middle, then adjust sharpness for optimum clarity

try to go to menu using ur remote and adjust the v-size/vertical size....

check zoom on the remote control press it

Horizontal output transistor is faulty .
replace it.
Gopal