Question about RCA DIRECTV Satellite Remote Control

5 Answers

Finding codes Instruction on how to use the code search or do a manual code search

Posted by on

  • ellehcimrey Nov 10, 2008

    needed intruction on how to put in codes for toshiba tv... i purchased this rca universal direct tv remote from a thrift store ... no manuals nor instructions... thanks

  • teamhendrick Mar 06, 2009

    I have a rca universial remote,Model number RXU704MSP2 and i have a sanyo tv.I have found 15 codes that i have tried and none of them work.I have tried entering the codes and also manually.Does anyone know any more codes or sites i can find some codes at for my tv?Please help!!


5 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I cant get the remote to program codes in a sanyo tv. i have a rca universal remote.

Posted on Nov 22, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I needed intruction on how to put in codes for toshiba tv... i purchased this rca universal direct tv remote from a thrift store ... no manuals nor instructions... thanks

Posted on Nov 10, 2008

  • Ron Butler
    Ron Butler Dec 01, 2011

    on that control... you hold both tv and on/off buttons . till light stays on... then press the play button. the light will blink 10 times.and stop. you may need to press the play button several times. when the tv goes off , wait till the light stops flashing . press the return button one at a time till tv comes back on. when tv comes on . stop and press stop button till light goes off. this tell you its programed.


  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Im trying to sync my RCA remote with a symphonic tv

Posted on Oct 13, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Can not program my DIRECTV remote for RCA TV

Posted on Oct 09, 2008

How program my control sanyo for tv curtis mathes

Posted on Sep 12, 2008

2 Suggested Answers

  • 1 Answer

SOURCE: Instruction on how to find a code on a gfm remote control

I need help with a code for a gf remote control, I have a Sharp tv

Posted on Dec 06, 2009

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Codes for Samsung tv

You should look up in the manual of your unspecified Samsung Universal Remote the codes for your Samsung TV.
If you don't have tha manual try here:

Free Samsung Universal Remote User Manuals ManualsOnline com

How To Program Your Samsung Universal Remote

Download Center Download Software Firmware Drivers Manuals Samsung

Samsung BN59 00599A Remote Instruction Manuals and Codes direcTutor

If still no luck do a google search for
Manual Samsung and the model of the remote
Also you can search for
Codes Samsung and model

Aug 09, 2015 | Samsung Televison & Video

1 Answer

Trying to program 22 in. norcent tv. can't find the code.


You may find that the manufacturer of the device you want to add to the remote is not listed in the instruction manual or you do not have access to the manual to find the codes. The Jumbo Universal Remote has an automatic code search that will scroll through each of the codes until it finds the correct code for your device.

To use the code search, turn on the device you want to set. Point the remote at the device and hold the "Code Search" button until the LED is solid red. Press the corresponding button for the device you wish to set, such as "TV" or "DVD." With the remote pointed at the device, repeatedly press the "On/Off" button. Continue to do this until the device powers off. When it shuts off, press the "Enter" button to set the remote control. Use the "On/Off" button and see if the device turns on again. If it does, the setting is complete. If it does not, attempt the code search again and be sure to press the "Enter" button quickly when the device turns off.


Jul 14, 2011 | Innovage Jumbo Remote Control

1 Answer

How do I program the giant universal remote?

Code Search (HARD)
1.Hold Code Search button Down
2.Press and release Device button TV,Vcr,ext....
3.Press on and off button repedatley until device turns on/off
(You may have to do this up to 1,000 times)

Manual Entering (EASY)
1.Look in instruction booklett or on back of box for a list of device codes
2.Find your device model code
3.Hold Code search button
4.Enter code with # keys
5.Release Code search button

Nov 08, 2009 | Televison & Video

1 Answer

My RCA312W remote control is programmed, but the channels do not all have sound. I'm assuming the wrong code was used and I don't know how to reprogram the remote because a ''code search'' or ''setup''...

im not positive,see if u can get menu settings and find the audio settings,i have an rca remote also and it has a code search button under the on off button,

Oct 18, 2009 | RCA Universal Remote Control

1 Answer

No instruction manual for a Radio Shack remote

If your device does not respond to the remote after
trying all codes listed for your brand, or if your
brand is not listed, try searching for your code. For
example, to search for a code for your TV:
1. Press TV once.
2. Press and hold P until the red LED blinks
twice, then release.
3. Enter 9 9 1. The LED blinks twice.
4. Aim the remote at the TV and press Power.
The remote sends IR codes from its library to
the selected device, starting with the most
popular code first.
5. If the TV responds, go to step 6. If the TV
does not respond, press CH+. The remote will
try the next code. Continue until the TV
NOTE: Press CH- to try the previous code.
6. To lock in the code, press P once. The LED
blinks twice.
7. To search for other device codes, repeat steps
1 to 6, substituting the appropriate device

Mar 23, 2009 | Radio Shack 15-2142 Remote Control

1 Answer

Remote control

I was able to get my Motorola DVR Cable Box to work with my Universal Remote using the following instructions:

The Instruction Manual for Manual Code Search seems incorrect. (Page 5).

A) Manually turn on the device to be controlled. (O.K.)
B) Press and hold the code search button until the red indicator stays on, then release the code search button. (O.K.)
C) Press and quickly release the desired mode button (TV, VCR). The red indicator blinks off once. (O.K.)
D) Face the remote control directly to the device you want to control. (O.K.)
E.) Press the ON/OFF Button (this should read CHANNEL UP button) repeatedly until the device to be controlled changes channel. The red button blinks off with each button press.
F) Press and release enter to install the code. (O.K.)

-Note, the remote is able to change the channel, however, it does not control the volume.

Jan 03, 2008 | Televison & Video

5 Answers


GE TV CODES ARE 045,002,018,003,007

Oct 02, 2007 | Televison & Video

10 Answers

Philips Universal Remote PM435S reprogramming

I have the same tv and remote that you do. I went on Philips website and they have instruction manuals and the code lists. You can also press and hold the 'CODE SEARCH' button until the light stays on. Then press 'TV' button. Make sure your TV is on and press Channel Up button until the channel changes on your TV. If you go too far, press the Channel Down button until it changes again. Then press the Mute button to store the code. Good Luck!!

Mar 20, 2007 | Philips PM435S Remote Control

Not finding what you are looking for?
RCA DIRECTV Satellite Remote Control Logo

2,529 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69938 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides