Question about Televison & Video

Open Question

PROGRAMMING A HITACHI REMOTE CLU-4371UG2 TO USE A DVR WITH A SATELITE SETUP

Posted by on

  • elieze131 Nov 04, 2008

    same here, there is no option available for the coolsat receiver.

×

5 Suggested Answers

  • 76 Answers

SOURCE: programming vcr without codes, need codes

google this:Hitachi remote multi page CLU-682GR

Posted on Apr 01, 2009

  • 2 Answers

SOURCE: connection problem

You can connect via a coax cable from the sat. box to VHF input of your TV and tune on ch 3 or 4 or connect via a RGB cable to component input of your TV or a regular Audio/Video composite cable will connect sat. receiver to your TV use yellow color for video and red&white for stereo Audio then choos the connected input on the menue and watch sat.

Posted on May 27, 2009

  • 1335 Answers

SOURCE: I have a Hitachi VCR+ remote for my projection TV

Which model Projection TV do you have?

Posted on May 10, 2010

SOURCE: I need a new remote control #CLU-613MP for my

Hey there, You'll have to contact the Hitachi local customer care and order a replacement. It won't be that much of a cost, maybe around $20 or so.
p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 13.0px Arial}

Thank you for using FixYa!

I hope that I helped you & that this post is helpful to you at most!

Don't forget to rate! :)

Posted on Jan 15, 2011

SD Tech
  • 14553 Answers

SOURCE: My remote control hitachi brand CLU-413UI does not

The remote can be tested by any shop (a small laminated card sensitive to infra red will test it).

If you just want to replace it Google it with the CLU-413UI and you will find it for sale, I did and here is one I saw.

http://remotes.com/store/hitachi/clu413ui.html

You may also want to look on EBAY as there are usually ones for sale there. Most likely if your remote is defective is either it got dropped or something was spilled on it, Also make sure you hit TV on the remote first as most of these are multipurpose remotes(If something else is selected it will not work on the set).

Before you rate how helpful this information was let me know what you find and or if you have questions.

SD TECH

Posted on Jul 10, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What buttons on the remote to fix the digital array


Setup codes to check with Hitachi tV are:
0088 0059 0142 0060 0072 0004 0009 0091 0001 0012 0061 0137 0139 0141 0179 0227

Jul 06, 2012 | Hitachi CLU-4311UG Remote Control

2 Answers

How to re-program remote clu577tsi hitachi tv


Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand

Apr 03, 2012 | Hitachi Clu-577tsi Remote Control

1 Answer

I need a code list for true tech dvd player for my hitachi clu 4362s


Hello
There is no setup codes for Trutech DVD player to synchronise with the Hitachi CLU-436S remote control. OK.

Oct 15, 2011 | Hitachi CLU-4324UG Remote Control

1 Answer

I have a Hitachi CLU-4362S remote that I am trying to program to operate my Dish network box and DVD. Anyone that can help me do this I would appreciate this.


Hi my nameis Mike Houston of DISH Network; I was going over your post and see where youwant the Hitachiremote to work the DISH receiver and your DVD. The best thing to use is theDISH Network remote to use all the functions of the receiver; I will send thislink http://www.hitachi.com and theinstructions of programming the Hitachiremote.

Jan 10, 2011 | Hitachi CLU-4324UG Remote Control

2 Answers

Service menu codes for P42H401 plasma


PROCEDURE:

(1) With Plasma turned On, Enter the I2C Service Menu: (Remember, you are doing this without seeing a picture).

  • Press "EXIT" once, just in case TV Guide is brought up for Set-Up.

  • Press "Menu" and wait a few seconds.

  • Press "Menu" ~ "Menu" ~ "8" ~ "Select" Buttons on the Remote:

  • The Service Menu is entered, even though you can not tell.

Service Menu selection you can not see

service-menu.jpg


  • To navigate and adjust while in the Service Menu, use the remote control's Cursor Keys.

Dec 31, 2010 | Hitachi P42H401 42 in. Plasma HDTV

1 Answer

Programming vcr without codes, need codes


google this:Hitachi remote multi page CLU-682GR

Apr 01, 2009 | Hitachi Televison & Video

1 Answer

Programming a hitachi remote to a dish network box


i would try to reprogrsam the remote first. do yuo have the owners manual to do this?

Dec 18, 2008 | Hitachi CLU-5713TSI Remote Control

2 Answers

Search for your codes


Here is the owners manual for the TV. Programing the remote instructions are on pages 28-31 (codes on on page 31) http://dl.owneriq.net/7/761c1421-be39-40c4-b493-a94c83223d90.pdf

Jul 14, 2008 | Hitachi CLU-5713TSI Remote Control

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

675 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69795 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6370 Answers

yadayada
yadayada

Level 3 Expert

63801 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...