Question about Lexmark X7350 All-In-One InkJet Printer

1 Answer

Only displays bars when you power up`

Last night we had a strong storm with lots of lightening, this morning I started the computer and the printer only displays bars. Is there a reset combo for this machine, or a fuse to protect it from voltage surges in the phone line? I didn't find mention of any in the manual, but really don't want to switch printer/fax machines again. Thanks for your help,
Joe

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 109 Answers

No surge protector is going to stop a lightning strike. It's just way too powerful.
1. Make sure you've unplugged, waited 10 seconds, plugged it back in. That's more than the on/off button does.
2. If your PC will communicate with the printer at all, Lexmark has a program that will reset it. It's located here: http://support.lexmark.com/cgi-perl/knowledgebase.cgi?ccs=229:1:0:520:0:0&docid=ENUS25837

Good luck!
Steve

Posted on Sep 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why wont printer start up?


this is will take several exchanges to troubleshoot.
when did it last work? any lightening storms, is it on a surge protector or UPS? can you test the voltage if there is a power supply in the power cable? when u unplug and plug back in any clicks or lights on the printer? same question when you press power.

Jul 27, 2014 | Kodak ESP 7250 All-in-One InkJet Printer

1 Answer

Konica 7020 error code f-26-2


Says that it is a PCL connector problem. Look at all of your connections and make sure they are ok.

Jun 24, 2010 | Printers & Copiers

1 Answer

No power after storm last night


this kind of power surge from an electrical storm would have taken out the nvram chips on the boards get a new printer and install it using a a surge protector

Nov 26, 2009 | Lexmark X5470 All-In-One InkJet Printer

2 Answers

Printer stopped responding.


It is possible that a power surge/spike took out the printer's circuit board somewhere. You might check with the printer's manufacturer for sure.

Jun 19, 2009 | Printers & Copiers

1 Answer

Electrical storm last night. Now no power on


you need a power supply. That is where the fuses are and you should not replace them.
The Power Supply should be replaced.

Jun 12, 2009 | Xerox WorkCentre M20i All-In-One Laser...

1 Answer

Last night there was a storm my fax machine is now making siren noises?


do you have a storm shelter? :-) Sounds screwed- any board problem is expensive

Apr 21, 2009 | Brother MFC 420CN All-In-One InkJet...

1 Answer

Error Message Error 0x886a6b72


I contacted www.hp.com and after a while we decided it is fried.
Lightening had hit my cable box and must have got the printer too.
All it will do is flash even after trying to reset to factory settings.
Thanks for the offer

Jun 25, 2008 | HP Photosmart 2610 All-In-One InkJet...

1 Answer

Help


hmmm..sounds like a truly unhappy printer..unplug from computer...power down printer..wait 5 min..power up again..see what it says on panel..if it does not power up, then you either have a bad power supply or a bad control board internally

you have a warranty on this item?

Jun 21, 2008 | Dell 924 All-in-One InkJet Printer

1 Answer

Service Call 020 Fatal Error


Error 020 is a ROM dimm error, could be as simple as reseating/replacing Rom Dimm or a expensive main PCB, you need to get hold of a oki dealer, contact oki to find closest OKI repair agent.
www.oki.com

Jan 08, 2008 | OKI C9300 Led Printer

Not finding what you are looking for?
Lexmark X7350 All-In-One InkJet Printer Logo

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...