Question about NEC VT670 Multimedia Projector

1 Answer

250V T6.3AH Slow Blo Fuse

This NEC VT 670 is mounted from the ceiling for a SmartBoard. Recently it blew a bulb, but after replacing the bulb the projector will no longer light up the bulb. The power light will come on, the fan starts up, but then when the bulb would normally come on, I get three beeps and then the status light flashes and the power light turns amber. I have found the above mentioned fuse to be blown, and have replaced it. My problem is, I don't know what caused it to blow, I can't find any bad readings on the circuit board. Is there any other fuses throughout the projector that I might look for. Kelly

Posted by on

  • garciamc
    garciamc Sep 04, 2012

    How does one change the fuse?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,234 Answers

Depending upon the way in which the lamp finally smoked, it is not unusual for the feeder fuse to blow. Replace the fuse and try the projector. As long as you haev a new lamp, it should work OK.

Dan

Posted on Sep 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to find a fuse for my jbl sub 160 subwoofer.


Those are pretty common. I'd pull the old one just to make sure the new one looks like it and be SURE the new one is a "Type T" or Slo-Blo.
Google "30mm 3.15A 250v slo blo fuse" and you will find them at Mouser, DigiKey, even Amazon. Better still--if you have a local electronic parts store, go there.

Sep 28, 2015 | JBL Audio Players & Recorders

1 Answer

How do I know If the fuse that needs replaced is a "slow blow" or "fast acting" fuse?


Look at the stampin on the fuse, if it has TXXA 250V, then it is a slow blow fuse type (T = Time dealy), some may be stamped with SLO-BLO XXA 250V on it.
Post pictures if you are not sure.
Failed TV and Monitors: http://s807.photobucket.com/home/budm/allalbums

http://en.wikipedia.org/wiki/Capacitor_plague

Sep 24, 2010 | Philips Televison & Video

1 Answer

I currently own a Klipsch promedia 2.1 computor speaker system. However, the fuse blew and i can not find the specific fuse i need anywhere. The web site says that i just need a standard 2A 250V slow blo...


Have you used 2A SLOW BLOW fuse? This type of fuses usually are ceramic type and are very different with the glass type ones. The glass type fuses are (more or less) fast blow. Although the best solution is to find SLOW BLOW fuses like this, in case it's very difficult you can use 3A fast blow fuse also.

In case of a problem or clarification, don't hesitate to post me a reply before rejecting my answer.
If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Thanks and regards
Please kindly rate this solution
Stelios
direct FixYa link: http://www.fixya.com/users/technical114

Sep 21, 2010 | Audio Players & Recorders

1 Answer

NAD C270 amp won't switch from red power/protection to green.


The AH may denote "slo-blo" style as opposed to Fast-acting
A fast-acting fuse will look like a single strand of wire ( maybe wiggly looking) ..A Slo-blo will have an element in it and a spring

Apr 11, 2009 | NAD C270 2-Channel Amplifier

2 Answers

Fuses for P-07


the fuse you need is a t4al 250v

this is a common slow blow 250v 4amp fuse.

You can get them at RadioShack



Oct 03, 2008 | Gemini Sound Products P07 2-Channel...

1 Answer

Nec projector


go into menu, under image, and chose ceiling.

Apr 08, 2008 | NEC VT37 Multimedia Projector

2 Answers

NEC VT670 Blown Fuse


Hey SithPitt,
sorry I can't help you, but maybe you can tell me where to find the fuse. I opened the projector and have problems to find a fuse on a first view. The suspected place near ON/OFF is well shielded.

Jul 03, 2007 | NEC VT670 Multimedia Projector

Not finding what you are looking for?
NEC VT670 Multimedia Projector Logo

2,755 people viewed this question

Ask a Question

Usually answered in minutes!

Top NEC Office Equipment & Supplies Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

The Knight
The Knight

Level 3 Expert

72640 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Are you a NEC Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...