Question about Cosatto Baby Gear

1 Answer

Cosatto duo traveller in slate

Hi ive just purchased one of these on the box it says that the front seat as 2 reclining positions and in the book it says just lift the bar to recline but we have lifted all the bars and nothing works the bar thats on the back seat to recline it is not on the front seat can you help

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 50 Answers

On this style of prame the front seat does not recline only the back one does.

Posted on Sep 18, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cannot adjust position


Hi
Grip the carseat on the underside of the front lip, push the button in and lift the front to recline / push down to put in a more upright position.
b7dfca4d-ad79-4177-a4ff-232802ebd77a.jpg

Feb 11, 2014 | Maxi-Cosi Maxi Cosi Tobi MAGIC ROSE 2008...

1 Answer

Change the position from recline


Hi Claire

Stand in front of the Buzz chassis at the front wheel. On either side of the seat unit you have a grey button. Push the button down and now you recline the seat / sit it upright as required.

http://www.quinny.com/-/media/Quinny/Product%20content/Manuals%20and%20instructions/buzz/MAN_DRU1074A14_Q_BUZZ_V1_2014_ENFRDENLESITPTKOPLELRUCS.pdf

Jan 16, 2014 | Quinny Buzz Three Wheel Stroller

1 Answer

Drivers side seat is reclined and seat won't go forward


That would be listed in the owners manual. If you don't have one go here and download it.

Dec 05, 2012 | 2006 Nissan Altima

1 Answer

I lost the keyfit 30 stroller manual where can i get one... or any website please


hope this help you:
  • Chicco USA - 30lb Cortina Travel System - Adventure Cortina ® KeyFit ® 30 Travel System Travel in style with your baby. Designed especially for the Chicco KeyFit 30 Infant Car Seat, the Cortina Stroller works as a travel ...
    www.chiccousa.com/gear/travel-systems/cortina-30lb-systems/travel-systems-30-adventure... · Cached page
  • Amazon.com: Chicco Cortina KeyFit 30 Travel System in Adventure: Baby Memory Recline seat remembers the last position seat was in when the stroller was folded. Has convenient one-hand fold. 3-position leg rest and flat recline for ...
    www.amazon.com/Chicco-Cortina-KeyFit-Travel-Adventure/dp/B000MAERLG · Cached page
  • Chicco Cortina KeyFit 30 Travel System - babyearth.com The new KeyFit Infant Seat is also available in a Travel System! With its unique Memory Recline seat and fresh, new patterns, you will be traveling in style!
    www.babyearth.com/chicco-cortina-keyfit-30-travel-system.html · Cached page
  • Cortina KeyFit 30 Travel System - Chicco USA - Strollers, car ... Cortina KeyFit 30 Travel System Travel in style with your baby. Designed especially for the Chicco KeyFit 30 Infant Car Seat, the Cortina Stroller works as a travel system ...
    www.chiccousa.com/gear/travel-systems/cortina-30lb-systems/travel-systems-30-midori.aspx · Cached page
  • Sep 19, 2011 | Chicco Cortina KeyFit 30 Travel System...

    2 Answers

    Hi am looking into buying a quinny zapp pram, is it possible to lay the back down while a baby is sleep?


    the best thing would be to get the zapp xtra and buy some carrycot adapters
    you will then have a safe flat and snug travel system,

    Mar 14, 2011 | Quinny ZAPP Stroller

    1 Answer

    I have a 2006 lincoln ls sport and the drivers seat is stuck in one position there is only power to the lumbar


    The dirver seat module is attached to the underside of the seat frame. It must be calibrated if replaced. The dealer can use a tool to get failure codes (DTCs) from teh module. 1/2 hour labor charge to extract codes.


    Front Seats
    The front seats have the following features:
    • Driver memory
    • Power lumbar (optional)
    • Manual lumbar
    • Horizontal, vertical front and rear tilt adjustments (driver)
    • Horizontal, vertical front tilt adjustment (passenger)
    • Power recline
    • Climate controlled (optional)
    Adjustment of the seat may be accomplished with the seat control switch located on the side of the seat.
    --------------------------------------------------------------------
    Principles of Operation
    Driver Power Seat - Memory
    NOTE: The memory power seat track may stall when operating at 0°C (32°F) or below. Once the vehicle's interior temperature rises above 0°C (32°F), normal operation should return.
    The driver power seat is controlled by the driver seat module (DSM). The DSM does not need to be configured, however the driver seat does need to be calibrated when the DSM is installed. The driver seat control switch provides voltage to the DSM when activated. The NEUTRAL position of each driver seat control switch position is a ground state through the seat control switch contacts. A voltage input causes the DSM to power the appropriate motor until the input is removed. Ground is the normal state of the motor circuits through the DSM and is not switched to control the motors. The DSM internally switches the appropriate line from ground to power to adjust the motors.
    As the seat is adjusted, the DSM constantly monitors the motor position sensors to record the current seat position. The DSM will remove power from the motor upon termination of the seat control switch input or if the DSM does not see movement from the motor by monitoring the position sensor. The DSM must be calibrated to the seat track it is controlling. For additional information, refer to Seat Calibration. Once the DSM is calibrated to the seat track, it will only allow movement within the calibrated range.
    Seat Calibration
    The DSM is calibrated using a diagnostic tool. The calibration procedure automatically powers the driver power seat through its full range of motion and records the FULL STOP positions by monitoring the motor position sensors. Once the FULL STOP positions or range of the seat have been recorded, the DSM will only operate within the calibrated range. Any input attempting to drive the seat beyond the calibrated range will be ignored. This calibration is used for all seat control functions including manual switch control and memory recall positioning. During the seat calibration, the DSM may identify a function that is inoperative, such as a position sensor not changing. If the DSM identifies a concern that has a related diagnostic trouble code (DTC), the DSM will set the related DTC at the end of the validation procedure.
    The calibration procedure powers the seat track adjustments to the end of their travel, which is determined by the DSM sensing a change of state in the motor position sensors. If there is a concern with the seat track or motor position sensor that limits the travel, the DSM will interpret the stopping point as the end of travel and store the position. The DSM is not able to determine if the seat has moved to its FULL TRAVEL position. It is only capable of monitoring and storing the amount of travel seen by the position sensor changing states.
    For additional information on carrying out the power seat calibration procedure, refer to the diagnostic tool operating manual.
    Memory Seat
    Memory seat positioning can be recalled with the memory switches on the driver door panel or a programmed remote keyless entry transmitter. In either case, the DSM receives a memory recall 1 or 2 command from the driver door module (DDM) over the SCP communication network. The memory recall switches are a hardwired input to the DDM. The DDM also receives the remote keyless entry transmitter signals. Once a valid memory recall command is received from the DDM, the DSM moves the driver seat to the position stored in memory by powering the appropriate motors and monitoring the motor position sensors until the position is reached.
    This system allows automatic positioning of the driver seat to 2 programmable positions.
    • To program position 1, move the driver seat to the desired position using the seat control switch. Depress the set button. Within 5 seconds, depress button 1.
    • To program position 2, repeat the previous procedure using the set button and button 2.
    • To recall position 1, depress button 1. To recall position 2, depress button 2.
    A position can only be recalled when the transmission selector is in PARK or NEUTRAL. A position may be programmed at any time.
    Easy Exit/Easy Entry
    The easy exit function moves the seat backwards about 2 inches when the ignition key is removed from the ignition switch. The DSM receives a key out command over the SCP communication network and powers the driver seat rearward. This function will not operate if the seat is less than the travel distance to the end of the track, or the function has been deactivated at the message center driver personality settings. The DSM will also cancel this operation if a valid input command is received, such as the seat control switch or memory recall request.
    The DSM will record the current seat position before powering the seat for an easy exit function. This recorded position will be used to return the seat to this position on the easy entry operation. During easy entry operation, the seat is returned to the position previous to the easy exit operation. Easy entry operation will be cancelled if a valid input command is received by the DSM.
    Passenger Power Seat
    The passenger power seat motors are hardwired to the passenger seat control switch. The circuits are normally at ground through the seat control switch. The individual circuit is switched to power when the specific adjustment position is selected.
    -----------------------------------------------------------------------------------------------------------------------------
    Visual Inspection Chart Mechanical Electrical
    • Front seat track motors
    • Front seat track binding or obstructed
    • Front seat backrest power recline
    • Lumbar motor
    • Climate controlled seat ducts
    • Driver door module fuse(s):
      • Central junction box (CJB) fuse 7 (5A)
      • CJB fuse 22 (10A)
    • Driver seat module fuse(s):
      • Battery junction box (BJB) fuse 21 (20A)
      • CJB fuse 7 (5A)
    • Passenger power seat BJB fuse 28 (20A)
    • Rear heated seat fuse(s):
      • BJB 11 (20A)
      • CJB fuse 16 (5A)
    • Driver power lumbar BJB fuse 21 (20A)
    • Passenger power lumbar BJB fuse 28 (20A)
    • Driver and passenger climate controlled seat module fuse(s):
      • BJB fuse 26 (30A)
      • CJB fuse 16 (5A)
    • Seat control switch
    • Memory set switch
    • Lumbar seat control switch
    • Seat fan motor
    • Climate controlled seat module
    • Climate controlled seat switch

    Jan 14, 2011 | 2001 Lincoln LS

    1 Answer

    How do i remove the front seats of a 1998 Pontiac Grand Prix?


    On W-Body vehicles, the front seats are secured to the floorpan by two front hook attachments and two rear bolts installed to nuts welded to the floorpan.
    The manually operated two-way front adjusters provides only fore and aft movement of the seat. When the seat adjuster handle located on the front seat is pulled up, the seat adjusters unlock, permitting travel of the seat. When the seat is in the desired position and the seat adjuster handle is released, the seat locks in place.
    A power operated six-way seat adjuster is available. The adjusters are activated by three 12 volt, reversible, permanent magnet motors with a built-in circuit breaker. The motors are energized by a switch bolted on the seat side panel.
    The three motors drive the front seat and rear vertical actuators and a horizontal actuator. When the adjusters reach the limit of travel, torque is absorbed through the rubber mounted grommets located between the motor and the support. An overload relay is provided in the circuit and will open should excessive stall be applied.
    The optional 60/40 split bench front seats have seat back head restraints on the driver's and passenger's seat back. The head restraints are designed so they cannot be removed from the seat back without first inserting a small rounded tool inside the head restraint support tube to release the locking tab. The 60/40 split bench seat is equipped with a reclining mechanism on both the driver's and passenger's side. The recliner lever is located on the outboard side of the spring cushion. When the lever is pulled upward, the spring loaded dual linear reclining unit located in the cushion frame is released, allowing the seat back to be pushed rearward or allowing the spring loaded reclining unit to bring the seat back forward.
    Bucket seats are equipped with manual reclining mechanisms. An optional six-way power seat adjuster is available. Some bucket seats are equipped with inertia seat back locks. This system allows the seat back to fold forward without requiring the occupant to release a locking lever or access to the rear seat area. During a sudden stop or deceleration, or if the front of the vehicle is nose down, the inertia system of the seat back lock will engage, holding the seat back in its rest position. A release lever is provided to allow manual release of the seat back lock when the vehicle is in the nose down position. The release lever is located at the lower rear outboard corner of the seat back.
    Some W-Body vehicles (notably Pontiac coupes) have passenger front seats equipped with an E-Z Entry device. This is actuated, in an unoccupied seat, by completely folding the seat back forward disengaging the adjuster, and sliding the front seat forward to gain access to the rear seat area. To return the seat to its normal position, return the seat back to its rest position, and slide the entire seat rearward, engaging the adjuster.
    W-Body rear seats are available in several styles including a rear seat with an integral child restraint device.

    Sep 01, 2009 | 1998 Pontiac Grand Prix

    1 Answer

    Seat on pushchair, wont stay up, keeps falling back into recline position - graco cleo air


    Hi, i had this problem. If you put you hand down the back of the seat there is a strap with a 'holder' on it. If you tighten this as far as it will go this should hold it up. To lie it back again just release the 'holder'. Sound funny but once you look at the rear strap you will see what i mean.

    May 24, 2009 | Graco Cleo 6D00TRF3 Truffle Travel System

    1 Answer

    Front seat stays in the reclined postion..


    The seat position is changed through the use of a cable that runs through a flexible tunnel, under the seat. In one case that I'm aware of, this cable got stuck around a projecting seat spring under the seat. When the seat was reclined and moved backward or forward, the cable caught on the seat spring and the seat had insufficient slack in the cable to release from the reclined position.

    Jul 22, 2008 | 2000 Ford Focus

    1 Answer

    Maclaren Twin Traveller Seat Problem


    I purchased my stroller from ebay and one side of one seat would not stay in place it would only stay in the fully reclined position. I took it to a maclaren autorized stoller repair store and it was $37.28 to fix one bracket.

    Jan 22, 2007 | Maclaren Twin Traveller - Carbon/Crimson...

    Not finding what you are looking for?
    Baby Gear Logo

    Related Topics:

    186 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Cosatto Baby Gear Experts

    kli99gunrunn

    Level 2 Expert

    263 Answers

    Tom Chichester

    Level 3 Expert

    29817 Answers

    ray gallant

    Level 3 Expert

    40772 Answers

    Are you a Cosatto Baby Gear Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...