Question about Tally Matrix T2280 Printer

Open Question

THS ERROR 008

When I start printer then the error 'THS ERROR 008' but Print is coming properly. Some times the printer stop printing after some 05=60 pages and getting started but after some times maybe 4-5 hours when i start printer it works properly but the above error is still

Posted by on

5 Suggested Answers

SOURCE: tally T2280 THS ERORR 001

I have been told that this is a Printhead, or Logic Board fault.

Git rid of it on customers by cleaning printhead(two screws then taking printhead out & cleaning connections, Replacing).

But now i have THS error 009 ??

Posted on Jan 03, 2008

  • 1 Answer

SOURCE: hammer voltage 2

it prints for about two minutes then starts slowing down and then stops printing showing an error of : hammer voltage 2

Posted on Jan 04, 2008

  • 729 Answers

SOURCE: printing rubbish.

Hello,

Try reinstalling the driver to refresh the damaged or virus-infected or corrupt file.

Post me back the progress...

Don't forger to rate. Thanks!

Posted on Feb 20, 2008

  • 1 Answer

SOURCE: Print stops after 2 pages !

Hi my tally printer 6218 giving Ribbon motion fault, what could be done to remedy this error message ?

Posted on Aug 21, 2008

  • 169 Answers

SOURCE: THS Error on warrantee printer tally serial printer

The print head operating temperature may need to be calibrated for the operating environment of the printer.
The print head cable may be damaged or incorrectly plugged into the print head or logic board.
The print head may have a fault.
There may be a fault on the logic board or interconnect board

The first thing that I would recommend doing would be to calibrate the print head operating temperature, this can be done in the following way;

·Start with the printer powered OFF and at normal room temperature
·Hold down the ONLINE and SETUP button and power the printer back on
·Keep the ONLINE and SETUP button held down until the display reads ‘PRINT TEMP. CAL’ along the top line
·Press the button under ‘TEMP CAL’ (button 3)
·Using buttons 2 or 3 change the Temp Setting to match the temperature of the room the printer is used in (change this value by at least 1 degree even if it is correct to force the printer into recalibrating.
·Then press SET to save the settings.

Once the Temperature has been recalibrated power the printer OFF and back on again, this should resolve the problem.

If once the print head temperature has been calibrated the printer displays ‘Head Hot’ or alternatively displays a ‘THS’ error this indicates the printer has a hardware fault. The next step would be to identify which part may be causing the problem.
I would recommend first checking the carriage cable to ensure this is not damaged and makes good contact at each end. Then you would need to look at a logic board or print head failure.

Posted on Oct 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fault code 008-164 for xerox workcentre 7328


Xerox 7346
What is the problem of error code 008-164

Nov 07, 2012 | Xerox WorkCentre 7328 Multifunction laser...

1 Answer

Documents are not printing centered on the page - the printing is either too far down or too much to the left, etc. Artwith borders around are impossible to print accurately lined up on the page. I am...


hi,
i think when you get a printing not centered, its a problem of the polygon mirror of the laser unit, the mirror was not calibrated properly, when the exposition step start, the laser motor must be in constant speed, if the speed change printing will not be correct,so you must disassemble the LSU and check if there is a foreign body. but the best solution is changing ths LSU.
here the picture of LASER SOURCE UNIT:


mabroukmedal_4.jpg


mabroukmedal_5.jpg

Nov 05, 2010 | HP LaserJet CP1518 Printer

1 Answer

We changed the fuser on the IBM Infoprint 40 Model #004, Type 4332. However, after changing the fuser, we still get an error code in the display that says "008 Change Fuser." What does code 008 mean? ...


008 is the printers code to tell you to replace the Maintenance Kit. IBM Part Number 90H3567. After installing it, you have to make sure to tell the printer to reset the count value for that maintenance kit.

Jun 11, 2010 | IBM Printers & Copiers

2 Answers

Only test page prints nothing else prints blank page then starts 2nd blank page and stops midway through


Does the printer display any errors on the printer screen? You could try performing a print cleaning, check this manual for more directions how to do that.
http://www.ims-ink.com/pdf_files/english/IMS%20Ink%20Manual.pdf


Jan 11, 2010 | HP OfficeJet 6110 All-In-One InkJet...

2 Answers

I have riffile my smasung ml-1640 printer cartage three time then it show red light but printer works ok, after 2100 pages printed its not working properly, when i give command to print any file no error...


By deepak_compu on Oct 06, 2009
i have riffile my smasung ml-1640 printer cartage three time then it show red light but printer works ok, after 2100 pages printed its not working properly, when i give command to print any file no error show,but print not come. and when i print a test page from printer button it gives print. but on paper write like this toner exhoasted so what i do for this problem please give me soltuion of this problem

Oct 06, 2009 | Samsung ML-1640 Monochrome Laser Printer

1 Answer

Describe your Tally Matrix T2280 Prion power up


Calibrating the temperature resolves the THS error in most cases.

The ‘Temp Cal’ functions can be carried out in the following way;

· Start with the printer powered OFF and at normal room temperature
· Hold down the ONLINE and SETUP button and power the printer back on
· Keep the ONLINE and SETUP button held down until the display reads ‘PRINT TEMP. CAL’ along the top line
· Press the button under ‘TEMP CAL’ (button 3)
· Using buttons 2 or 3 change the Temp Setting to match the temperature of the room the printer is used in (change this value by at least 1 degree even if it is correct to force the printer into recalibrating.
· Then press SET to save the settings.

If the printer continues to display the THS error, the problem can be caused by;

Incorrectly seated print head
Damaged or incorrectly seated head cable
Fault with Main Board, Interconnect Board or the print head.

Jul 09, 2009 | Tally Matrix T2280 Printer

2 Answers

THS error


The print head operating temperature may need to be calibrated for the operating environment of the printer.
The print head cable may be damaged or incorrectly plugged into the print head or logic board.
The print head may have a fault.
There may be a fault on the logic board or interconnect board
The first thing that I would recommend doing would be to calibrate the print head operating temperature, this can be done in the following way;
The first thing that I would recommend doing would be to calibrate the print head operating temperature, this can be done in the following way;

·Start with the printer powered OFF and at normal room temperature
·Hold down the ONLINE and SETUP button and power the printer back on
·Keep the ONLINE and SETUP button held down until the display reads ‘PRINT TEMP. CAL’ along the top line
·Press the button under ‘TEMP CAL’ (button 3)
·Using buttons 2 or 3 change the Temp Setting to match the temperature of the room the printer is used in (change this value by at least 1 degree even if it is correct to force the printer into recalibrating.
·Then press SET to save the settings.

Once the Temperature has been recalibrated power the printer OFF and back on again, this should resolve the problem.

If once the print head temperature has been calibrated the printer displays ‘Head Hot’ or alternatively displays a ‘THS’ error this indicates the printer has a hardware fault. The next step would be to identify which part may be causing the problem.
I would recommend first checking the carriage cable to ensure this is not damaged and makes good contact at each end. Then you would need to look at a logic board or print head failure.

Jun 17, 2008 | TallyGenicom 2280 Matrix Printer

2 Answers

THS Error on warrantee printer tally serial printer


The print head operating temperature may need to be calibrated for the operating environment of the printer.
The print head cable may be damaged or incorrectly plugged into the print head or logic board.
The print head may have a fault.
There may be a fault on the logic board or interconnect board

The first thing that I would recommend doing would be to calibrate the print head operating temperature, this can be done in the following way;

·Start with the printer powered OFF and at normal room temperature
·Hold down the ONLINE and SETUP button and power the printer back on
·Keep the ONLINE and SETUP button held down until the display reads ‘PRINT TEMP. CAL’ along the top line
·Press the button under ‘TEMP CAL’ (button 3)
·Using buttons 2 or 3 change the Temp Setting to match the temperature of the room the printer is used in (change this value by at least 1 degree even if it is correct to force the printer into recalibrating.
·Then press SET to save the settings.

Once the Temperature has been recalibrated power the printer OFF and back on again, this should resolve the problem.

If once the print head temperature has been calibrated the printer displays ‘Head Hot’ or alternatively displays a ‘THS’ error this indicates the printer has a hardware fault. The next step would be to identify which part may be causing the problem.
I would recommend first checking the carriage cable to ensure this is not damaged and makes good contact at each end. Then you would need to look at a logic board or print head failure.

Apr 09, 2008 | Tally Matrix T2280 Printer

3 Answers

Print stops after 2 pages !


Hi my tally printer 6218 giving Ribbon motion fault, what could be done to remedy this error message ?

Jan 19, 2008 | Tally T6218 Matrix Printer

1 Answer

Page Too Complex Error


try sending a page with extremely little to print, such as one word...any change...I am suspecting printer memory overflow

May 30, 2007 | HP LaserJet 2550Ln Printer

Not finding what you are looking for?
Tally Matrix T2280 Printer Logo

Related Topics:

186 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tally Printers & Copiers Experts

Toby
Toby

Level 1 Expert

34 Answers

Tony

Level 3 Expert

2598 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Tally Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...