Question about Lexmark X5470 All-In-One InkJet Printer

1 Answer

Turning on i guess

So my roommate unplugged the power pack in the back and i plugged it in but the power light wont come back on. And i've restarted it, but should I like shut down and then unplug everything then plug it all back in or what?

Posted by on

  • fakashi Nov 25, 2008

    The X5470was working fine yesterday. Today I went to fax something and none of the usual green lights were on. The LCD screen still showed the date and time. Tried turning it off via the power button to no avail. Pulled power cord out at wall. Now it won't turn on at all. Nothing lights up, I've triple checked the power pack, cord and wall socket.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 109 Answers

It should work OK once you plug it back in. Note there are three places to check the power connection.
- The power pack has to be inserted firmly
- the cord that goes into the power pack
- the cord into the wall - be sure to check the wall outlet with a lamp or something to make sure it's not an overall power problem/breaker, etc.

Steve

Posted on Sep 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Printer wont turn on


Try to unplug the power adapter at the back of the printer and check if the LED light is on. If not, try to plug in the power cord to another power outlet. If still the same problem, the power adapter is the culprit.

If the LED light is on, make sure to plug in the power adapter all the way in the printer.

May 16, 2012 | Lexmark X4550 Multifunction Wireless Color...

2 Answers

All lights on wont shut down wont respond


Hello, maybe you have to do what i call hard reset, unplug it from the light then look round if you can locate any fuise on the print take it off, then allow it for 1hour and try again later

May 07, 2011 | HP Deskjet F2210 InkJet Printer

1 Answer

Power light blinking paper wont feed through


Unplug the power cord from the printer (top left side). Hold the paper feed button while plugging the cord back in.

Jun 29, 2010 | VeriFone 900 Printer

1 Answer

Printer wont start up properly. Status bar keeps scrolling and power light keeps flashing.


HP recommends rebooting.Turn off the printer,unplug for 60 seconds.Plug it back in,and restart.It's worked for me!

Jan 24, 2010 | HP Photosmart C6180 All-In-One InkJet...

1 Answer

HP Officejet Pro L7580 says I unplugged it, but I didn't!


It sounds like the printer is suffering from some kind of hardware failure which may have been caused by a power surge or similar.

I've never heard of this particular problem and I doubt HP will have either but my advice would be to contact HP support and see if they can provide more information or advise you better.

Unfortunately if my guess is right, there's really not a lot you can do except replace the printer with a new one.

Mar 15, 2009 | HP Officejet Pro L7580 All-In-One InkJet...

2 Answers

Lexmark x7170 will not copy


unplug the power pack in the back for about 30 seconds the plug back in

Nov 22, 2008 | Lexmark X7170 All-In-One InkJet Printer

5 Answers

Canon mp830 printer won't turn on


Please stop! First you must try the simple solution described elsewhere.
Unplug unit. allow it to sit for 20 minutes. then plug it in. hit 'power' button. it worked for me (and others)

Jun 07, 2008 | Office Equipment & Supplies

Not finding what you are looking for?
Lexmark X5470 All-In-One InkJet Printer Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...