Question about GE Washing Machines

1 Answer

Ge top load washer WSERE526FOWW

When in a wash cycle machine will empty with no problem but when it starts to spin it shuts off after a few seconds. the machine is not off balance. if i move control to spin only it functions ok.
What is my problem?

Posted by on

  • mgarrison Sep 11, 2008

    this is a clothes washing machine not a dishwasher.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,239 Answers

Dishwashers usually run on 115-volt or 120-volt power. The water they use comes directly from the water heater, and wastewater is drained into the sink's drainpipe. The dishwasher is not connected to the cold-water supply. For best dishwashing results, set the temperature control of the water heater to no less than 140 degrees Farenheit. Water cooler than this usually doesn't get the dishes clean, unless your dishwasher is a newer model that preheats incoming water. The water shutoff for the dishwasher is typically located below the adjoining sink.






ge top load washer WSERE526FOWW - 3456523.jpg

Posted on Sep 11, 2008

  • ABHISHEK.C
    ABHISHEK.C Sep 13, 2008

    hi sir 
    sorry i sent wrong info that i want to send this to other one...............please change rating...........

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washer wont drain. fills with water. goes through wash cycle but wont drain. once it gets to the spin cycle, it spins for a few seconds and then stops and rinse light comes back on.


Hi,

Problems with a washing machine not spinning or not draining are often interrelated..

If you are having a problem with your top load washer then check out thistip...

Washing Machine does not Pump or Spin


If you are having problems with your front load washing machine then checkoutthis tip...

Front Load Washing machine not draining and or not spinning


heatman101

Apr 21, 2011 | GE Washing Machines

1 Answer

GE top load Profile washer. Spin cycle not


Hi,
If you are having a problem with your top load washer then check out this tip...

Washing Machine2_bing.gif does not Pump or Spin
http://www.fixya.com/support/r4617986-washing_machine_not_pump_or_spin

If you are having problems with your front load washing machine2_bing.gif then checkout this tip...

Front Load Washing Machine2_bing.gif not draining and or not spinning
http://www.fixya.com/support/r4784376-front_load_washing_machine_not_draining

heatman101

Jun 11, 2010 | GE WVSR1060A Top Load Washer

2 Answers

No spin or agatae


Unplug machine. Change load type to medium. Clean door sensor. Set knob to drain and spin. Plug machine back in to powr. Open and close door 10 times in 15 seconds. Pull knob to activate drain and spin.

Mar 19, 2009 | General Electric WHDSR316G Top Load Washer

1 Answer

Maytag Neptun will not agitate or spin


Change your timer. or timer sensor. behind your knobs

Feb 14, 2009 | Maytag Neptune MAH5500B Front Load Washer

2 Answers

Clothes still wet at end of spin cycle


i would check your belt.the added stress of a full tub longer with water may have done it in.part#wh1x2026 God bless,tom

Jan 10, 2009 | GE WBSR3140DW Top Load Washer

4 Answers

How do you reset the washer?


I have a GE WBSR3000GWS Model and it stopped spinning at one point as well. My service guy came out and did the procedure below and reset it with in minutes.

How to Reset your GE Washer :
1. Turn the dial like your going to wash a load but do not pull the knob.

2. Unplug the washer from the wall and wait for 30 seconds.

3. Plug the washer back into the wall.

4. Lift the lid 5 times to at least 6 inches high. Open/Close within 15 secs.

5. Pause… You should here a click. If you do not, then repeat 1 – 5 again.

6. Insert a towel or garment into the washer and then pull knob to start the wash cycle.

7. Check the wash cycle to make sure the washer is agiating and spinning during its cycle.

GE Answer Center : 1-800-626-2000 opt 3 - for more information
Lale

Jun 20, 2008 | GE WBSR3140DW Top Load Washer

2 Answers

Washer will not spin


Could be a bad clutch or transmission. I would either call a tech or get a new washer (these newer GE models don't seem to be very reliable, go for a Whirlpool/Kenmore model next time). Here are breakdown diagrams for your washer: http://www.appliancepartspros.com/partsearch/model.aspx?model_id=230151 Hope this helps, APP Tech

Aug 07, 2006 | GE WJSR2070B Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

336 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Tim Whalen

Level 3 Expert

3072 Answers

yadayada
yadayada

Level 3 Expert

70346 Answers

Are you a GE Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...