Question about Sony Handycam CCD-TRV68 Camcorder

2 Answers

Unknown sign I kept this camera for 4 months in my cabinet without the battery. last night when I try to use it again there is this sign appearing on screen, it's like a triangle with line below , it appears everytime i press the play button . Need your help guys.

Posted by on

  • jg24dupont1f Mar 30, 2009

    When i try to play or record it plays for a few seconds and then a symbol appears and then my camcorder shuts off the symbol is a triangle on top with a line under it


2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Most likely the lithium Ion battery has been discharged. Leave it plugged in for 24 hours without turning it on and it should charge the battery.

Posted on Aug 12, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

If the symbol is an arrow facing up with a line under, it requires to eject the tape to resolve some issue. Maybe the tape is hanging. Try to eject using your power supply and then inspecting the tape for "looseness" and take out the slack if it is. Also try using a different tape.

Posted on Jan 15, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My battery was completely dead i charged it over night it last for a couple of minutes and went dead again what's the problem

Batteries have a service life and it most likely needs replacing.
If the battery is more than two years old I'd head straight down and buy a newie.

Mar 15, 2011 | Canon ZR85 Mini DV Digital Camcorder

2 Answers


replace a new battery ......because the battery has to supply power to display , flash ,motor etc..........

Jun 23, 2008 | Panasonic Palmcorder PV-GS9 Mini DV...

1 Answer

After installing newly charged batter when I turn

How old is the batt.? I purchased a digital camera and after 2 months the batt. went bad. Have had it now 2 years and several batt.later.

Dec 25, 2009 | DXG Technology Video Cameras

1 Answer

Cann't eject cassette from Canon ZR60

I had a similar problem last few days with my ZR60.
The problem I had was that the tape won't eject and on repeated attempts to eject it would eject as if it had a mind of its own.
I was messing with it a little bit and realized that the door was not opening fully. Being a delicate item I didn't realize that I was not fully opening the door may be because there was a little friction in the pivot pins or what ever.
Try to gently swing the door open fully and see if it helps.
Since I discovered this problem I tried 10-12 times, and every time it would eject the tape and load it.
I was almost going to give up this camcorder last night thank GOD, I am able to use it.
Good Luck to you.

Dec 27, 2008 | Canon ZR60 Mini DV Digital Camcorder

1 Answer

Aiptek camera

hmm.. this is a hard one. Well, you may have the SD car on Lock, but if that's not the problem, you either used up the memory, or need to upgrade the firmware Sorry I can't answer in great detail. I'll try to find some more information ASAP. Sincerely: (youtube user) animation508

Sep 16, 2008 | Aiptek A-HD 720P Flash Media Camcorder

2 Answers

Charging Battery

maybe your battery is dead, put your battery in your freezer for one night and charge it again.

Jan 21, 2008 | Video Cameras

1 Answer

GXMG77 Everio camcorder - issue with data transfer to PC

Yes even though it doesn't make sense, the only thing that was found when I brought mine in was that the Battery was corrupted. JVC even after having it in the shop and NUMEROUS calls to customer service. They could not reproduce this problem. Until they brought me to the back to the tech and realized the only thing different was that the battery pack was not in. For some reason the battery pack was corrupted and was causing this issue. I say if you have time on your warranty bring it back and buy a new camera.This will keep happening to the battery packs and JVC will want you to keep buying new batteries. As well as start charging 90 dollars an hour even in warranty to fix it. They kept trying to hold on to it longer and longer till the warranty just ran out.

Jan 02, 2008 | JVC Everio GZ-MG37 Camcorder

1 Answer

Has error

Take the battery out and turn selection switch to camera and then turn it off. Put the battery back in and its working again.
if that doesn't work try
Try smacking the side of the camera relatively hard with the palm of your hand. Eject the tape and reinsert. You may need to do this a couple of times.

Dec 24, 2006 | Sony Handycam CCD-TRV308 Camcorder

Not finding what you are looking for?
Sony Handycam CCD-TRV68 Camcorder Logo

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Video Cameras Experts

Larry Stiles
Larry Stiles

Level 2 Expert

286 Answers


Level 3 Expert

101406 Answers

Sheryl Bahr
Sheryl Bahr

Level 2 Expert

65 Answers

Are you a Sony Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides