Where can I get a user manual and remote for my venturer PLV 71180523 19" TV with DVD Bob J

https://www.manualslib.com/manual/800456/Venturer-Plv16100.html


Venturer PLV16100 Instruction Manual

Use remote to set menu/settings on cable. I see if I can find user manual to give you exact procedure.

Hello, Jsisr -

I find there are some Venturer DVD Player remote controls for sale on eBay in the category of Conumer Electronics > TV, Video & Home Audio > TV, Video & Home Audio Accessories > Remote Controls.

Best wishes.

Here is a link to the online user manual.
Hope this helps
Bob

Curtis DVD1041 Instruction Manual

try to read the users manual to guide you on how to operate the system manually as there is always an option for manual operation using the buttons

Hello
Your Emerson Sponge Bob's model will be SB350. It is a TV/DVD combo, with two AV inputs too. You ahve to see only DVD player with it as you says. You can change its mode to eiter TV/AV or DVD/TV by its remote control buttons. Press the DVD/TV mode button on the remote control to chage the modes to TV or DVD. On DVD mode, you can play DVDs with it. I thinks that you have its user manual with you now. Go to its pate [23] where there is illustrations for which button on the remote control handset should be pressed to select this. If you haven't its user manual with you, send your email address to me by FixYa comment box. I'll send a copy you the user manual to you by return mail. OK.

Try here: http://remotes.com/remotes/servlet/rs?a=Search&mode=brand&v=1&brand=Venturer&uuid=A12605685976201

Cindy Wells

I found an audio amp IC and indicated on the top of the chips is CHMC S0723. It should have cross reference can be found in ECG semi-conductor guide or NTE ICs manual. The pin#12 is the Vcc in 12VDC, pin#6 & #7 are audio input L&R.
Other solution is just hook an RCA cord right into its audio out of this set to your receiver and it will works.

The problem is in the power supply. If I had a schematic I could fix it myself. Can anyone tell me where I can get a schematic? I sent several emails to Venturer support but they don't reply. Benjamin