Question about Samsung WEP200 Headset

3 Answers

Bluetooth After trying to sync bluetooth message reads "No bluetooth device found try again?" The bluetooth is on...fully charged...and I followed the booklet instructions.

Posted by on

  • tiffmarie Dec 04, 2008

    tried to connect 2 phones a samsung SGH-A727 AND a TMOBILE SIDEKICK LX both won't connect to the device

  • taranjeet199 May 10, 2009

    i can not connect my samsung wep200 bluetooth headset with my sony erricson p910i. can someone solve this problem?

×

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 274 Answers

Does your mobile's bluetooth is opened?

Sir, here are some bluetooth headsets on my website, please pay a visit to.thanks.
http://www.uoften.com/

Posted on Sep 28, 2011

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Can i connect sumsung wep 200 bluetooth to my sony ericsson handset

Posted on Dec 29, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I have a LG rumor phone from sprint and I am trying to program my bluetooth samsung WEP 200 and it is saying no bluetooth device found how do I set up the bluetooth I lost my instruction. The bluetooth was previously hooked up to the Razor phone

Posted on Sep 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am unable to sync my Mad Catz bluetooth to my PS3 and I can't find my bluetooth manual. How do I sync up?


Please see the sync details below:

Pairing is a process of associating Bluetooth devices with each other. It will establish a permanent security link between the devices and enable quick access to the services provided without the need to re-enter Pass Keys. You will only need to pair your PS3 and the Headset once.

Paired devices remain paired even when:
-One of the devices is powered off.
-A service connection is interrupted or stopped.
-One or both devices are restarted.

Pairing the Headset with the PS3
Before the Headset can be used with the PS3, the two devices must be 'paired' so they can communicate with each other. Use a gaming controller for this procedure and ensure that the Headset is powered on (flashing blue LED light) and that it is not being charged via USB cable.

1. Power on your PS3 console.

2. Within the "Settings" menu, press X on "Accessory Settings."

3. Press X on the icon labeled: "Manage Bluetooth® Devices."

4. Scroll down and press X on the icon labeled: "Register New Device."

IMPORTANT: Depending on your model of the 8860 Bluetooth® Headset, your power button is either an oval shape with an icon of a circle with a line going through it (5a) or it is a button with a phone icon (5b). Please follow the appropriate next step depending on your model of the 8860.

5a. Once at the next screen, prepare the Headset to be paired with the PS3 by holding down the K1 button until the LED flashes Blue and Red (hold K1 approx 12 seconds).

5b. Once at the next screen, prepare the Headset to be paired with the PS3 by tapping the pairing button located next to the volume controls on the side until the LED flashes BOTH Blue and Red.

6. Once the Headset's LED indicator is alternately flashing Blue and Red (indicating the Headset is ready to be paired), press X on "Start Scanning."

7. Once Scan is complete, the PS3 will recognize all Bluetooth devices within range.

8. Locate "8860" from the list of available devices and press X on its icon to be prompted for a Pass Key

9. Enter 0000 (four zeros) as the Pass Key and press X on OK

10. You should then be taken to a new screen stating: "Register completed"

.

Trouble Shooting



Q. The PS3 is unable find the Headset.
A. If the Headset has been paired with another Bluetooth device, the PS3 will have trouble finding the Headset. Either remove the Headset from the paired device or turn off the Bluetooth power on the paired device.

Q. The Headset cannot be activated after being charged for 20 minutes.
A. To activate the Headset, the battery needs to charge for at least 40 minutes. It is highly recommended to fully charge the battery before use.

Q. No indication of charging is shown.
A. If the Headset battery is empty or has not been used for a long time, it may take some time for the Headset LED indicator to show charging status with a steady Red light. Make sure the PLAYSTATION 3 is turned on. The 8860 cannot charge without the console being turned on.

Q. No sound can be heard from the Headset.
A. Please make sure of the following:

-Make sure that the two devices have been paired.
-Make sure that the Headset is turned on.
-Make sure that the two paired devices are within 30 Ft. (9.15 meters) of each other.

*** Do not try to pair the headset to the PLAYSTATION 3 when the headset is attached to the USB cable. If it is attached to the USB cable when trying to pair up, it won't pair with the PLAYSTATION 3. ***

Jan 28, 2011 | Mad Catz PS3 Bluetooth® Headset Wireless...

2 Answers

My headset will not turn on


Hello

Your bluetooth headset is powered by an internal battery. If the battery is not charged,it just won't turn on. Fully charge your battery before use.

Make sure that the power outlet you're using is working and that the cord is fitted correctly into the wall, PC or Car outlet and the Jabra Bluetooth device.

Try unplugging the Jabra Bluetooth device and see if it turns on. If so, use the Jabra Bluetooth device until the battery is completely exhausted. The next time you charge it, check that it is charging properly

If the Jabra Bluetooth device is still not charging, check what happens when you initially plug the Bluetooth device into its charger. If the light on the Bluetooth device flashes on and then off again quickly, it is likely that the battery is no longer working. Batteries cannot be replaced or covered warranty

Dec 30, 2010 | Jabra BT150 Wireless Headset

3 Answers

My nokia bh 213 bluetooth was working with nokia E63 , all of a sudden it is not , the bluetooth is charged and green light is flickering , when tried to pair thed eivce it says the device not found , what...


Thanks sleekycupid.. Even i had a same problem just followed the steps you said.
Step 1: Switch off the bluetooth device.
Step 2: Charge the bluetooth device.
Step 3: Then hold the device button till the green indicator blinks faster than normal.
Step 4: Now try to pair the device from your mobile.
Step 5: Mobile will ask you a passcode, press 0000 and enter.

You might not follow step 1 and 2. Just start from step 3.
Enjoy!


Mar 13, 2010 | Nokia Bluetooth-Headset BH-213 2600...

1 Answer

Plantronics Explorer 220 bluetooth won't pair with LG NV3 phone. It's in discovery mode and I'm getting the red/blue flashing on the bluetooth like the manual says, but it just keeps searching and will not...


Well I got it working, of course, try turning the phone off on again instead of just the bluetooth, it worked. I should have done that before posting the question.

Jul 28, 2009 | Plantronics Explorer 220 Bluetooth Headset...

1 Answer

Headset


you haveto have the bluetooth connectivity serch for th device. one the device is found then your phone can be linked to that bluetooth adapter.

Jul 15, 2009 | LG HBM-710 Wireless Headset

2 Answers

Cannot register my bluetooth to my PS3 please help


did you try to hold down the power button on your headset until it blinks and then try to sync to the ps3 again. You have to put he headset into sync mode before attempting to put the ps3 into sync mode

May 04, 2009 | Motorola Mobility H350 Wireless Headset

1 Answer

How do i pair my H700 MOTORAL bluetooth to my verizon cell phone?


Hi,

If you have lost the pairing on your phone with the headset follow these simple steps below:
• Setting the headset into pairing mode
1) Ensure the headset is fully charged
2) The headset must be switch off
3) Press and hold the on button for +- 8 seconds until the light flashes red-blue
4) The headset is now in pairing mode
• Searching for the headset on the phone
1) Go to “settings” or “connections”
2) Select Bluetooth, then options
3) Select Devices and click add
4) The phone should search for any available Bluetooth devices and display what was found
5) Select the Motorola device and click add
6) You will be required to enter in a pass code which is standard ‘0000’, but try '1234' again if that doesn't work
7) If successful then the headset will start flashing BLUE every few seconds.
8) If it’s a Samsung or Nokia phone you will need to “AUTHORIZE” headset on the device.
• The headset is now paired with the phone

Hope this helps

Chris (ziraffa)

Jan 09, 2009 | Motorola Mobility Bluetooth Hands Free...

4 Answers

Plantronics Voyager 510 & Blackberry Curve


 Plantronics Support Phone Number: 1-800-544-4660 
Do not use the power button to sync.
To sync device, Press + button (volume) and Silver button (on boom) at simultaneously. LED Light will blink RED & BLUE.  Device ID should appear on your screen.

Jan 14, 2008 | Plantronics 510 Voyager Headset - PLN-510...

1 Answer

My phone wont locate my LG bluetooth.


Just because your phones Bluetooth option is turned to on doesn't mean it's searching. I would try going in to your device history and clicking on new device while your Bluetooth is in pairing mode.

Aug 08, 2007 | LG HBM 730 Bluetooth Headset Wireless...

5 Answers

I have a problem with my bluetooth H500


You need to full charge both units first before to try them again. YOU MUST KNOW ONE MAIN KEY HERE IS THE BLUETOOTH HEADSET MUST BE IN PAIRING MODE WHICH IS MEAN THAT THE LED MUST IN STANDING MODE NOT IN FLASHING MODE AND WHEN THE LED OF THE BLUETOOTH HEADSET IS IN STANDING MODE, BRING IT CLOSER TO YOUR PHONE AND BE SURE YOUR PHONE BLUETOOTH FEATURE IS ON AND BE RECOGNIZED FROM OTHER DEVICES. Try to restart carefully step by step each device as described above and then if you still can not get them pairing then either on eof them has Bluetooth function impaired. You need to have another Bluetooth Headset to test whether your phone Bluetooth function or the Headset has it. Good Luck

Mar 30, 2007 | Motorola Mobility H500 Wireless Headset

Not finding what you are looking for?
Samsung WEP200 Headset Logo

963 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Headsets Experts

kakima

Level 3 Expert

96372 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

xalint1
xalint1

Level 2 Expert

150 Answers

Are you a Samsung Headset Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...