Where is connection for hp pavilion p6110f to tv

Any of them should work just make sure you have 1 that works with your version of windows.

Hi... try to hit F2 or F10 to enter bios setup and see drive menu if there is no HDD drive this mean your hard drive fail or select the 0 HDD as first boot.

Buy a Graphic Card PCI e x16 compatible. Install, Move the monitor cable to the new card connection and your good to go, with better graphics. If you haven't installed a Graphics Card before, do a little research. Take a look at this for example: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01684404&tmp_task=useCategory&cc=us&dlc=en&lc=en&product=3970026

F10 takes you to the bios settings. What happens if you press f8 repeatedly when it boots up? Is there an option for a recovery console?
Here's a link to the primary support page for your system, at HP.com.But please try to follow the steps in this article, or this article, even though they apply to vista..Expecially focus on the "standard steps to resolve most staartup problems." Also recovery options here.
Finally, read the startup repair section in the windows 7 help and how to, available here. I'm not familiar enough with the vista to windows 7 upgrade to give you a lot of advice on this startup problem, but here's one possible article that may prove helpful, if you can get that far...

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!


l.

you can either use the integrated OR the video card, CANNOT both at the same time.. You should buy a PCIe graphic card with dual output support.

Hello,

I think you may have been at the wrong site. Here is the HP registration site:

HP Registration

Just enter your product name and/or model number and click Search.

This is not HP. This is a tech support site that helps with a wide variety of problems and products.

Thanks for using Fixya.

Like this ???
http://h10010.www1.hp.com/wwpc/jm/en/ho/WF06b/12454-12454-3329740-64546-64546-3942799-3970028.html

well you should have an ide cable with 2 connectors, the master being the very end and the slave on the center connector. so i'm not sure which cord you're talking about but if it's for CDA i reccomend only connecting the most used ROM to the sound card. there is really no reason to hook up both.

If you need further help, reach me via phone at https://www.6ya.com/expert/joel_63c670a84e9f6a97

check the Ethernet cable weather it is correctly.

The speed depends
1. on your connection
2. on your network cards
3. and what else are you doing on your computer

Solutions are respectively
1. getting better internet connection
2. Generally the connection over home wifi is slower than if you directly connect with lan cable
3. If you have any downloaders your should turn them off when you are using computer

another thing to look for is the presense of viruses/adware/spyware on your computer.

40 mpbs is not that bad for email, unless you are trying to download a HUGE attachment which I guerss is not the case usually.