Question about Sony KV-27S42 27" TV

1 Answer

TV does not turn on

When I push the power button on my TV I here a click and then another click a few seconds later. You don't feel any fuzz on the TV so I am pretty sure there is no major power suply to the TV. My question is whether it is the Fuse or the power coil. Does anyone have any ideas?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 3,130 Answers
Re: TV does not turn on

Nope not a fuse as if it was you woundnt hear a click. And as to the "power coil" . are you refuring to a power transformer?? Nope not that as well. Could be a horizontal driver problem that happens a lot as the horizontal driver transformer gets or develops cold solder connections. Another problem could be a power suppy problem or a flyback transformer too. Good Luck

Posted on Apr 14, 2006

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Why does this Sharp CRT TV turn on then click off a few seconds later?

TV with Black Blank Screen Repair How to Troubleshoot ...

? 3:16
May 8, 2014 - Uploaded by
TV Repair Help for a TV With a Black No Image on the Screen - Troubleshooting ... Click Here to BUY TV ...

Oct 31, 2015 | Sharp Standard (CRT) Televisions

1 Answer

I have a Mitsubishi cs-40505 tv. It will not turn on. A clicking noise is heard after pushing the power button then again a few seconds later. Tv does eventually turn on after pressing power bu.tton...

The fault is with its main board. Contact any service technician, or the authorized service center for Mitsubishi. I can't predict about how much you have to spend. It will depend upon the fault, and the sost of component/s have to be replaced.
Anyway, be sure, this is not an easy work, for a user to do.
Gopakumar Gopalan Google

Feb 26, 2014 | Mitsubishi CS-40505 TV

1 Answer

My tv is an old rca tv, i have a dish network remote, one of the kids locked out the tv and i dont know how to get it back on, it wont tell me a anything all i can do is change the tv with the remote,...

If I read your post correctly it sounds like, the remote no longer works the volume or power for the TV set. If this is correct follow the steps below for a Power Scan. If this is not the issue or the steps don't work feel free to contact me and we will sort this out!
Power Scan
1.) Hold down the clear "TV" button on the remote for four seconds, then press 500 pound ( #)
2.) Hold down the clear "TV" button on the remote for four seconds, press the big power button once.
3.) Press the channel up button once per second until the TV turns off then press pound (#).

Try several functions Mute Volume and Power to make sure the remote works properly then press "SAT".

Daniel Busa
DISH Network
Customer Service

May 16, 2011 | RCA 32F531T 32" TV

1 Answer

Turn power on, approx. 30 sec later it the power

It varies as to what is actually making the TV shut down. Shorting the connectors on the A.C. plug have nothing to do with it turning back on. Its just the fact you are unpugging it for a few moments.

Nov 11, 2009 | Zenith Z19A11S TV

1 Answer

Push power button to turn on tv, two seconds later, before the picture arrives, power goes back off

holding circuit for the power on relay not working. suspect bad micro relay failed.

Sep 20, 2009 | Philips 30PW8420 TV

1 Answer

RCA 27v520t will not turn on

That's because somehow the lightening caused a fault in the power board.
Ypu can try an unplug for 2 hrs and then reconnect and start again If that dosn't work you will require intevention to replace the power supply

Aug 17, 2009 | RCA 35V432T 35" TV

1 Answer

No picture, but power light is on


Mar 13, 2008 | RCA 27F530T 27" TV

1 Answer

TV won' turn on

Solder, solder, solder! Shut down circuits protect crts to avoid permanent damage. If any of the deflection circuits are defective, or intermittent, shut down occurs. I have not only seen bad solder on deflection circuits, especially vertical, but also intermittent connections on the yokes themselves. I've also seen shorted convergence ics cause shut down. Don't forget solder connections in the power supply.

Jul 05, 2007 | Mitsubishi WS-55807 TV

1 Answer

TV turns off a second after turning on....

You have a high voltage shutdown problem, look at the threads here on Mitsubishi and you will find your answer.

Dec 09, 2006 | Mitsubishi VS-4543 45" TV

Not finding what you are looking for?
Sony KV-27S42 27" TV Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66456 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Are you a Sony Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides