Hi, how to unblock port 15346 in windows 7, I got this msg while trying to open cypercafe pro server icon

You don't want a new rule; you want an exception to the first rule. Start reading here Open port in Windows Firewall Windows Help

1. Find your host file located in your windows folder.

WinXP = C:\Windows\System32\Drivers\Etc\hosts

if you cant find the host file, please go to your folder options and UNTICK "hide protected operating system files"


2. After locating the hosts file, right click it, properties, UNTICK read only if it is read only to make sure we can edit it.

- open the host file with notepad and write like this:
127.0.0.1 sync.oneroof.com
127.0.0.1 reports.oneroof.com

- after done, save it/overwrite.

3. Please restart your PC and try your CCP Server again.

When i start my Cybercafe PRO Server it gives an error messge " Port: 15346 appears to be blocked. Can somebody help me how i can open this port?

1. instal server utility on Windows 7
2. right click icon choose properties
3. select compatibility tab choose your o/s
now run it and presto......

regards, dean

Hi, to make sure your printer is online. Please do these steps:

? On your windows 7 computer, please go to control panel and click printers and faxes.
? From printers and faxes, you can see your printer icon, right click the printer icon and select online.
? Try to print and that should be working.

for key span server to work with windows 7 install windows xp mode to windows 7 ( this can be downloaded from microsoft website if you have windows 7 pro and above. if you have windows 7 home then install windows virtual pc, start it up and insert a windows xp pro install disk. for info on this google 'workaround to install windows xp mode in windows 7 home premium and home basic') Once you have windows xp mode running, install the keyspan server utility int he virtual machine and setup as usuall. then share the printer. go to windows 7 devices and printers and add a printer, chose a network printer, select the new virtual machine and select the shared printer. In order for the printer to work just start up the keyspan program from windows 7 and print....your welcome.

That is correct Symantec list supported operating systems and Windows 7 is not compatible..

System RequirementsWindows 2000 Professional/Server/Advanced Server
Windows XP Home/Professional (32-bit and 64-bit)
Windows 2003 Server Standard/Enterprise (32-bit and 64-bit)
Windows Vista Ultimate/Business/Enterprise/Home Premium/Home Basic (32-bit and 64-bit)
Windows 2008 Server
Internet Explorer 6.0 or later
Regards

Hi

check with the ISP person ,in there server tcp ports are enabled ,
in some ISP they there ports are open ports,
sume isp are block the some ports so pls first check with ISP provider side, why means limewire need the port as to open ,

in your pc windows firewall will not block any ports

I had exactly the same problem. The solution is to set up pptp as a virtual server pointing to the lan ip of the server. Port forwarding only forwards the port but not the GRE protocol (pptp passthrough)

TCP/IP printing for windows xp:
you must know the IP address of the print server and the port name.and the pc's ip address must be in the same subnet as the print sever's ip address.
Step 1 Go to Start > Settings > Printers and double-click the Add Printer icon to open the Add Printer Wizard.
Step 2 Select Local Printer and click Next.
Step 3 Select Create a New Port and choose Standard TCP/IP Port from the drop-down menu and click Next.
Step 4 This will bring up the Add Standard TCP/IP Printer Port Wizard. Click Next.
Step 5 Enter the IP address of the print server and the port name and click Next.
Step 6 The next window will prompt you for the Device Type. Select the Standard radio button and use Generic Network Card from the drop-down window.
Step 7 Click Finish to close the port configuration wizard.
Step 8 This will bring you back to the Add Printer Wizard. Step through the remaining windows of the Add Printer Wizard, accepting the default values to complete configuration.