Question about BenQ FP737S-D 17" LCD Monitor

1 Answer

BenQ FP737-D 17" LCD monitor

The monitor goes black after a while when on the net. Have to re-boot and it comes on again for a while.

Posted by on

  • ksundq Sep 11, 2008

    I will try this and see how it goes.

  • ksundq Sep 15, 2008

    I checked that ventilation is good on both monitor and PC. The monitor comes back OK after having shut it off for 15 min. but, then it only last for anything between 1/2 hr.-1hr. and the same happens,

    the screen goes black.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 116 Answers

IT almost sounds if the monitor itself is overheating? Have you tried shutting the monitor off for 15 or so minutes then turning it back on? It may also be a video card overheating issue. Make sure your PC and Monitor both have adequate ventilation.

IF this doesn't help the situation, try updating the video drivers as well.

Posted on Sep 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Benq 567s lcd monitor does not power up. Switch led blinks but goes dead. Tried replacing capacitor 450v 82uf with 400v 100 uf but did not work. please help.


That cap is for the Primary power supply switching circuits. How is the DC secondary side, no blown fuse, shorted transistors in the inverter circuits? Pictures will help, budmrtn@aol.com
http://s807.photobucket.com/home/budm/allalbums
http://en.wikipedia.org/wiki/Capacitor_plague
http://www.badcaps.net
It may have the same bd as DELL since BenQ makes monitors for DELL and HP.

May 21, 2010 | BenQ FP71G 17" LCD Monitor

1 Answer

Benq monitor


Try checking the cables and disconnect all cables from system and monitor and reconnect all of them.

And in case it does not work,Please change the cable coming from tower to the Monitor as it seems that it has gone bad.


Hope this Help.
Cheers!!!!

Jul 22, 2009 | BenQ FP767 17" LCD Monitor

1 Answer

Benq FP92G Display couple of seconds then blank. LED still green.


budged electrolytic capacitor nearby high voltage transformer. 220microcarad/25Volts. apply fresh solder and re-connect lamps.

Jun 01, 2009 | BenQ FP92G+S (Black,Sylver) (Silver,...

3 Answers

Monitor Randomly Turns Black


I have exactly the same problem with my Benq FP71E+ ..

What i found is a temp fix is this :

When monitor dims and goes black i turn it off , hit the bottom left side (near the BENQ logo) turn it on again and it works ..

This works every time for me . But after a while it switches off again , could be 5 minutes could be 5 hours . Its random

May 02, 2008 | BenQ FP71E 17" LCD Monitor

1 Answer

LCD Screen problem


You have a failed inverter circuit. This is a very common fault with BenQ and other LCD monitors. I have seen more FP737 and FP731's and all their cousins in the last 2 years then I care to count.

You will be best to take it to a TV technician and have them do the repair. There are ways to fix it yourself, but the chances of success are not great without a decent amount of electronic knowledge.

Call several places and get approx quotes based on the inverter fault. A lot of TV techs will not work on LCD monitors and is another good reason to call around first.

One final thing, check the manufacture date on the back of the monitor, these normally come with a 3 year warranty and it will be either expired now, or very close to it. If it is still under warranty, then contact BenQ near you to facilitate the repairs.

BenQ support webpage.

Apr 15, 2008 | BenQ FP731 17" LCD Monitor

1 Answer

Benq 24" wont comes back after sleep mode


Try to install the OS once again.
If it turn up the same again then it may be the logical board problem.

Apr 12, 2008 | BenQ FP92W LCD Monitor

1 Answer

Benq LCD monitor


I had same problem. No Power at the monitor. what can I do?

Jan 03, 2008 | BenQ T705 17" LCD Monitor

3 Answers

Benq FP71G+S NOt starting.


Hello
I have had this problem twice once at my school and once with my BenQ FP71G Monitor. At my school the monitor ( HP ) just stopped working and smelt like burnt popcorn.(though is think this is due to some kids chucking a soccer(football) ball at it! With my BenQ it has the same problem though i nownthink it is because of the monitor has been on for excessive hours ( 3-4 ) and just shut down because of overheating. I will see in a couple of hours if it works !

Copper_R

Dec 30, 2007 | BenQ FP71G 17" LCD Monitor

Not finding what you are looking for?
BenQ FP737S-D 17" LCD Monitor Logo

Related Topics:

133 people viewed this question

Ask a Question

Usually answered in minutes!

Top BenQ Computer Monitors Experts

Tony

Level 3 Expert

2598 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1042 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a BenQ Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...