Question about Acer TravelMate 2300 Notebook

1 Answer

Acer travelmate 2420

Hi, sir!
i was suppose to reformat my system using windows xp, as i started to format the first partition of my disk then suddenly it shuts off. afterward i turn it on again but the setup wont resume, the only message i can see is "setup is inspecting your computer's hardware configuration" then the message disappears..then all i can see now is a black screen i've waited several hours but the setup did not resume.....please can i ask for an advice from a professional like you guys.....thanks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 34 Answers

Hello! :)
The first thing I would have you do is to shutdown the computer (Hold the power button until the system turns off) and retry the format. Are you using a Microsoft XP disc or a recovery disc? If your not sure just post with all of the text that appears on the CD. 

Posted on Sep 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reformat my acer travelmate with windows vista ultimate?


1. Boot the system form CD/DVD/BD Rom
2. Windows Visa take some time till a popup windows will appear . Click on Install.
3. You will see Hard Drive Partitions.
4. Click on the partition you wish to format
5. On the lower side of the windows , click on advance .You will see more options.
6. Click on format.
7. Setup will format the selected partition

Jul 08, 2011 | PC Laptops

2 Answers

Hi, I am adil. I am trying to install Windows XP on my Dell mini Inspiron 1020 but failed. Please provide me details steps.


Method 1: Perform a clean install of Windows XPA clean installation consists of removing all data from your hard disk by repartitioning and reformatting your hard disk and reinstalling the operating system and programs to an empty (clean) hard disk. For more information about important things to consider before you partition and format you hard disk and how to partition and format your hard disk by using the Windows XP Setup program, click the following article number to view the article in the Microsoft Knowledge Base: 313348 How to partition and format a hard disk by using Windows XP Setup programTo perform a clean installation of Windows XP, follow these steps:
  1. Back up all important information before you perform a clean installation of Windows XP. Save the backup to an external location, such as a CD or external hard disk.
  2. Start your computer from the Windows XP CD. To do this, insert the Windows XP CD into your CD drive or DVD drive, and then restart your computer.

    Note To boot from your Windows XP CD, the BIOS settings on your computer must be configured to do this.
  3. When you see the "Press any key to boot from CD" message, press any key to start the computer from the Windows XP CD.
  4. At the Welcome to Setup screen, press ENTER to start Windows XP Setup.
  5. Read the Microsoft Software License Terms, and then press F8.
  6. Follow the instructions on the screen to select and format a partition where you want to install Windows XP.
  7. Follow the instructions on the screen to complete the Windows XP Setup.
If you have successfully installed Windows XP, you are finished.

May 23, 2011 | Dell Inspiron Mini 1012 Netbook...

1 Answer

How to install winxp to laptop dell inspiron 910. dell inspiron 910 no hdd but 8gb flash drive


Hi there,

A clean installation consists of removing all data from your hard disk by repartitioning and reformatting your hard disk and reinstalling the operating system and programs to an empty (clean) hard disk. For more information about important things to consider before you partition and format you hard disk and how to partition and format your hard disk by using the Windows XP Setup program, click the following article number to view the article in the Microsoft Knowledge Base:
313348 (http://support.microsoft.com/kb/313348/ ) How to partition and format a hard disk by using Windows XP Setup program To perform a clean installation of Windows XP, follow these steps:
  1. Back up all important information before you perform a clean installation of Windows XP. Save the backup to an external location, such as a CD or external hard disk.
  2. Start your computer from the Windows XP CD. To do this, insert the Windows XP CD into your CD drive or DVD drive, and then restart your computer.

    Note To boot from your Windows XP CD, the BIOS settings on your computer must be configured to do this.
  3. When you see the "Press any key to boot from CD" message, press any key to start the computer from the Windows XP CD.
  4. At the Welcome to Setup screen, press ENTER to start Windows XP Setup.
  5. Read the Microsoft Software License Terms, and then press F8.
  6. Follow the instructions on the screen to select and format a partition where you want to install Windows XP.
  7. Follow the instructions on the screen to complete the Windows XP Setup.
Post back if it is not working we will be happy to help you.
Thank you.
Cheers!!!

Jan 09, 2011 | Dell Inspiron Mini 10 Notebook

1 Answer

Format


How to partition and format the hard disk using the Windows XP Setup program loadTOCNode(2, 'moreinformation'); You can use the Windows XP Setup program to partition and format the hard disk. To do this, use the following steps: Step 1: Partition the hard disk loadTOCNode(3, 'moreinformation');
  1. Insert the Windows XP CD into your CD or DVD drive, or insert the first Windows XP Setup disk into the floppy disk drive, and then restart the computer to start the Windows XP Setup program.

    Note If you are using the Windows XP Setup disks, insert each additional disk when you are prompted, and then press ENTER to continue after you insert each disk.
  2. If you are prompted, select any options that are required to start the computer from the CD or DVD drive.
  3. If your hard disk controller requires a third-party original equipment manufacturer (OEM) driver, press F6 to specify the driver. For more information about how to use F6 to supply a third-party OEM device driver while the Windows Setup program is running, click the following article number to view the article in the Microsoft Knowledge Base: 314859 (http://support.microsoft.com/kb/314859/ ) Limited OEM driver support is available with F6 during Windows XP Setup
  4. At the Welcome to Setup page, press ENTER.

    Note If you are using the Setup disks (six bootable disks), the setup prompts you to insert the Windows XP CD.
  5. Press F8 to accept the Windows XP Licensing Agreement.
  6. If an existing Windows XP installation is detected, you are prompted to repair it. To bypass the repair, press ESC.
  7. All existing partitions and non-partitioned spaces are listed for each physical hard disk. Use the ARROW keys to select an existing partition, or create a new partition by selecting the non-partitioned space where you want to create a new partition. You can also press C to create a new partition using non-partitioned space.

    Note If you want to create a partition where one or more partitions already exist, you must first delete the existing partition or partitions, and then create the new partition. You can press D to delete an existing partition, and then press L (or press ENTER, and then press L if it is the System partition) to confirm that you want to delete the partition. Repeat this step for each existing partition that you want to include in the new partition. When all the partitions are deleted, select the remaining non-partitioned space, and then press C to create the new partition.
  8. To create the partition with the maximum size, press ENTER. To specify the partition size, type the size in megabytes (MB) for the new partition, and then press ENTER.
  9. If you want to create additional partitions, repeat steps g. and h.
  10. To format the partition and install Windows XP, go to step 2.

    If you do not want to install Windows XP, press F3 two times to exit the Windows Setup program, and then do not follow the remaining steps in this article.

    To format the partition without installing Windows XP, use a different utility.
Step 2: Format the hard disk and install Windows XP loadTOCNode(3, 'moreinformation');
  1. Use the ARROW keys to select the partition where you want to install Windows XP, and then press ENTER.
  2. Select the format option that you want to use to format the partition. You can select from the following options:
    • Format the partition by using the NTFS file system (Quick)
    • Format the partition by using the FAT file system (Quick)
    • Format the partition by using the NTFS file system
    • Format the partition by using the FAT file system
    • Leave the current file system intact (no changes)
    Notes
    • If the selected partition is a new partition, the option to leave the current file system intact is not available.
    • If the selected partition is larger than 32 gigabytes (GB), the FAT file system option is not available.
    • If the selected partition is larger than 2 GB, the Windows Setup program uses the FAT32 file system (you must press ENTER to confirm).
    • If the partition is smaller than 2 GB, the Windows Setup program uses the FAT16 file system.
    • If you deleted and created a new System partition, but you are installing Windows XP on a different partition, you are prompted to select a file system for both the System and Startup partitions.
  3. Press ENTER.
  4. After the Windows Setup program formats the partition, follow the instructions that appear on the screen to install Windows XP. After the Windows Setup program is finished and you have restarted the computer, you can use the Disk Management tools in Windows XP to create or format more partitions. For additional information about how to use the Windows XP Disk Management tools to partition and format your hard disk, click the following article number to view the article in the Microsoft Knowledge Base: 309000 (http://support.microsoft.com/kb/309000/ ) How to use Disk Management to configure basic disks in Windows XP
Tanks. Cheer!

Mar 23, 2010 | PC Laptops

5 Answers

How to reformat acer aspire one


If you are replacing or reinstalling the operating system you will need your installation disk. The installation disk will ask you if you want to format the drive before reinstalling. If you otherwise want to wipe the hard drive you can usually download tools for your hard drive manufacturer. Basically you cant format the drive thats currently being used. You have to boot from a CD.

Aug 15, 2009 | Acer Aspire One PC Notebook

1 Answer

How do I re-format Acer 4200 TravelMate hard drive?


Windows Reinstallation Disk option:

Insert Windows Reinstallation disk into tray, Boot to CD/DVD-ROM by pressing F12 at initial boot screens, delete existing Windows partition, re-create partition, and then follow steps to reinstall Windows. This will lead you to an option for formatting hard drive. I recommend choosing the full format versus the quick, from this point you can let windows install, or just shut the computer down when the format finishes. You will have to watch the progress, though, if you don't want the install to commence.


Boot disk option:

For XP, 95, 98, or ME, follow the instructions at this MS article page. It will walk you through creating a boot disk that will allow you to format.

You will need a floppy disk or CD

Apr 03, 2009 | Acer TravelMate 4200 Notebook

1 Answer

Installing Xp on laptop Acer travelmate 4230


You should be able to use your recovery disk? If that's what you are using and getting that problem then I would call the factory and have them send you another recovery disk cause yours might be bad.

Mar 26, 2009 | Acer TravelMate 4230 Notebook

1 Answer

I want to overwrite Windows Vista for Windows XP


you need to reformat the hard drive and then install XP.
to do this you will need to insert the xp disk and then reboot the computer/laptop. when prompted you will need to delete the existing partition and then create a new one. reformat the partition and install xp. you will need a valid XP code to do this.
Their are many good guides to formating and installing xp on the internet.

Ian

Mar 09, 2009 | Acer 4220-2346 Notebook

2 Answers

About Travel mate 2420


yes you can it will cost u around -55-60US$ only

Jul 08, 2008 | Acer TravelMate 2300 Notebook

Not finding what you are looking for?
PC Laptops Logo

Related Topics:

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer PC Laptops Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Henk de Ruiter
Henk de Ruiter

Level 2 Expert

78 Answers

Are you an Acer PC Laptop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...