Question about Motorola Mobility RAZR V3

1 Answer

RAZR Sound Problems

When receiving or sending telephone calls, about half of the time I am unable to hear the person on the other line and they are not able to hear me. It is not the ringer, but the person's voice that I can not hear. Then without changing anything, it will start working again and I can hear. Anyone have any ideas?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 38 Answers

Had the same problem with my razor and finally got tired of it so got a new one. The Razor's are such a sensitive phone that the slightest amount of dust in the mike or headset will affect it. You can try using an electronics cleaner and cleaning the set. If it is clean then it might be acting up due to shocks like dropping it or sitting on it. Without opening the phone these are just guesses. But if the cleaning doesn't work bring it to your provider and it might be warrantied or if you have insurance it may be covered. Hope this helps.

Posted on Sep 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We have a receiving problem with our HP Color LaserJet CM2320nf . The exact issue is that, sometimes the machine is unable to receive a fax with any number of pages from different senders Also, the...


Error Code 223 (ECM error)

The receiving product has been unable to receive an entire page even after multiple attempts to rereceive the parts of the page that contain errors. This is usually due to extremely poor line conditions.

1. Reattempt the fax reception at a different time when telephone line conditions have improved.
2. If the error persists, disable ECM. Errors may still occur, and may result in degraded image quality on the received page. However, the ability to receive the entire document will be improved.


Error Code 420

V.34 negotiations have failed from the originating product during phase four, which occurs after V.8 and before the first T.30 frames are exchanged. Compatibility problems have been observed in this area when sending to non-HP units.

Reattempt the fax transmission at a different time when telephone line conditions have improved.

Error Code 421

V.34 negotiations have failed from the originating product during phase three, which occurs after V.8, before phase four, and before the first T.30 frames are exchanged. Compatibility problems have been observed in this area when sending to non-HP units.

Reattempt the fax transmission at a different time when telephone line conditions have improved.

Jul 20, 2011 | HP Laserjet CM2320nf All-In-One Color...

1 Answer

Our telephone line has a disturbance sound when calling and receiving calls. We can't hear the caller due to this sound. It happened since June 26, 2011 and since then we are contacting your hotline...


this problem generally happens when your landlines phone line is in contact with other persons phone line . maybe your neighbor is having the phone line or it is in close contact with any other wire while on its way to exchange.. for this matter you need to contact or if you could visit them it would be better

Jul 04, 2011 | Lands Phones

1 Answer

How can I get the telephone on my Brother Fax T96 to work?


Step by step information at the link below.
Brother Fax T96
The F/T Mode is used to allow the fax machine and the telephones to share the same telephone line. When a call comes in, the fax machine and all extension telephones on that line will ring according to the number of rings you have set for the Ring Delay.
When the Ring Delay is completed, the fax machine will answer the call and determine if it is a fax call or a telephone (voice) call.
The fax machine can determine this by the signal it is receiving on the telephone line. If someone is sending a fax automatically , the sending fax machine will transmit a fax tone (a series of beeps every 3 seconds).
If your fax machine hears these tones, it will receive the fax.

If the fax machine does not hear any fax tones, it assumes it is a telephone (voice) call and will begin ringing the F/T ring tones (double ring) for the length of time you selected for the F/T Ring Time. These tones will only ring on the fax machine's handset (extension or external phones will not ring). At the end of the F/T ring time the fax machine will go into the receive mode in order to receive a manual fax.
(If the call was a voice call and was not answered, the caller will hear the fax receive tones also).
  • If you answer the call before the fax machine(during the ring delay period) and determine it is a fax, you can transfer the fax to the fax machine for receiving.

  • If you answer the call on an "extension" phone and hear a beep every 3 seconds (automatic fax) or silence (manual fax), press *51 or *91 for New Zealand (remote activation code) on the telephone keypad, wait to hear the fax machine turn on (chirping sounds) and then hang up.

  • If you answer on the handset of the fax machine and hear a beep every 3 seconds or silence, press the Fax Start or Start/Copy key on the control panel of the fax machine and then hang up the handset.

  • If you answer a call on an "extension" phone during the F/T Ring Time, you will hear the F/T ring tones.
    To release the call from the fax machine, press #51 or #91 for New Zealand (remote deactivation code) on the telephone keypad and you can speak to the calling party.

  • If you pick up the handset of the fax machine during the F/T ring time, you may talk to the calling party immediately.

Mar 28, 2011 | Office Equipment & Supplies

1 Answer

I have a idect c5i. i am unable to take calls when i receive a call. the phone keeps ringing and on pressing the call button, i get that the handset has accepted the call but i do not hear the sound of...


Check the handset is registered to the base- if your handset has been assigned a number it has. Can you call out from the phone? If you can I would advise disconnecting from the power and telephone line for 10-15 mins and removing the batteries from the handset and pressing every key (press them all individually in any order) the reconnect and see if you have the same problem, if you do and the item is under 30 days old return to the store with your receipt, if not and was purchased from Argos go to the store with receipt and they will send to Idect for repair, if purchased somewhere else contact 0845 3459677 and they will repair the phone under the guarantee providing you have the receipt.

Mar 05, 2011 | Vtech DECT 6.0 Cordless Phone with Digital...

1 Answer

No dial tone on handset. can't send or recieve fax.


? Other equipment, which uses the same phone line as the HP All-in-One,
might be causing the test to fail. To find out if other equipment is causing a
problem, disconnect everything from the phone line, and then run the test
again. If the Dial Tone Detection Test passes without the other equipment,
then one or more pieces of the equipment is causing problems; try adding
them back one at a time and rerunning the test each time, until you identify
which piece of equipment is causing the problem.
? Try connecting a working phone and phone cord to the telephone wall jack
that you are using for the HP All-in-One and check for a dial tone. If you do
not hear a dial tone, contact your telephone company and have them check
the line.
? Make sure you have correctly connected the HP All-in-One to the telephone
wall jack. Using the phone cord supplied in the box with the HP All-in-One,
connect one end to your telephone wall jack, then connect the other end to
the port labeled 1-LINE on the back of the HP All-in-One.

If the supplied phone cord is not long enough, you can extend it. For
information, see The phone cord that came with my HP All-in-One is not long
enough.
Check the connection between the telephone wall jack and the HP All-in-One
to make sure the phone cord is secure.
Make sure you use the phone cord that came with the HP All-in-One. If you
do not use the supplied phone cord to connect from the telephone wall jack
to the HP All-in-One, you might not be able to send or receive faxes. After
you plug in the phone cord that came with the HP All-in-One, run the fax test
again.
If you are using a phone splitter, this can cause faxing problems. (A splitter is
a two-cord connector that plugs into a telephone wall jack.) Try removing the
splitter and connecting the HP All-in-One directly to the telephone wall jack.

If you are using a phone splitter, this can cause faxing problems. (A splitter is
a two-cord connector that plugs into a telephone wall jack.) Try removing the
splitter and connecting the HP All-in-One directly to the telephone wall jack.
If your telephone system is not using a standard dial tone, such as some
PBX systems, this might cause the test to fail. This will not cause a problem
sending or receiving faxes. Try sending or receiving a test fax.
Check to make sure the country/region setting is set appropriately for your
country/region. If the country/region setting is not set or is set incorrectly, the
test might fail and you might have problems sending and receiving faxes.
Make sure you connect the HP All-in-One to an analog phone line or you will
not be able to send or receive faxes. To check if your phone line is digital,
connect a regular analog phone to the line and listen for a dial tone. If you do
not hear a normal sounding dial tone, it might be a phone line set up for
digital phones. Connect the HP All-in-One to an analog phone line and try
sending or receiving a fax.
Make sure you use the phone cord that came with the HP All-in-One. If you
do not use the supplied phone cord to connect from the telephone wall jack
to the HP All-in-One, you might not be able to send or receive faxes. After
you plug in the phone cord that came with the HP All-in-One, run the fax test
again.
After you resolve any problems found, run the fax test again to make sure it
passes and the HP All-in-One is ready for faxing. If the Dial Tone Detection test
continues to fail, contact your telephone company and have them check the
phone line.

Dec 03, 2010 | HP Laserjet M1319F Laser Multifunction...

1 Answer

I am able to call but can't hear the other persons phone ringing, busy, voicemail or if anyone answers, there is no sound. The same if someone calls me, it rings, I try to answer & nothing. I can send...


well the ringing is from another speaker that works as a loudspeaker/ handsfree on your phone

as a preliminary check try connecting a headset and answer the phone if you can hear the other party then the problem is with the earpeice, you might want to get it repaired

Jul 22, 2009 | Motorola Mobility RAZR V3

1 Answer

Receiving error 388. Can receive faxes but won't connect with other fax machines when trying to send


Hi,

The reason for the error code:
4e5e48b.jpg Error Code: 386, 387, 388, 389, 390, 391, 392, 393, 394, 395 Definition

There is too much noise on the line for a valid connection between two fax machines to complete. The noise problem might go away over time.

Solution

Retry the fax reception at a different time when telephone line conditions have improved. Call the telephone provider if line conditions fail to improve.
Error Code: 386, 387, 388, 389, 390, 391, 392, 393, 394, 395 Definition

There is too much noise on the line for a valid connection between two fax machines to complete. The noise problem might go away over time.

Solution

Retry the fax reception at a different time when telephone line conditions have improved. Call the telephone provider if line conditions fail to improve.
Please Click here and follow the instructions to resolve the issue.

May 21, 2009 | HP Officejet 6310 All-In-One InkJet...

1 Answer

Faxing with Dell printer 968


Firstly yes your telephone number is used as your Fax number.

Your phone line connections sound ok, so the problem must be with your fax machine.If it's a combined Fax/Printer make sure you select Fax mode.

Dec 05, 2008 | Office Equipment & Supplies

1 Answer

I just bought the Linksys CIT310 IP Wireless phone


Hi

On the phone menu, select "Base Settings" then click on "ringer type". The volume there has 1 - 5, try increasing the volume.

Jul 29, 2008 | Linksys CIT310 IP Wireless Phone

Not finding what you are looking for?
Motorola Mobility RAZR V3 Logo

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Mobility Cell Phones Experts

D. E. Hev

Level 3 Expert

1167 Answers

Lawrence Oravetz

Level 3 Expert

8710 Answers

Are you a Motorola Mobility Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...