Question about JVC DRM10 DVD Recorder

3 Answers

Sound Interference I keep getting a terrible interefence on the sound through this unit. This will only clear by unplugging the unit, leaving for a few minutes and and plugging back in. This always clear the interferences but it always returns within a day or so. The interference is worst when watching the TV through the DVD channel or trying to record on the unit but can also occur when watching pre-recorded discs. I also suffered the loading problem on start up but this was repaired about a year ago. Are the prioblems connected and how can I resolve?

Posted by on

3 Answers

Re: Sound Interference - JVC DRM10 DVD Recorder DVD & Blu-Ray Players

CHECK IC8001 (AK5365AQ)

Posted on Nov 05, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: Sound Interference

I am experienceing exactly the same problem. it started a few weeks ago, when a strong noise appeared while watching/recording TV through this JVC DR-M10SEF DVD recorder. Then last week I did experience my first flashing "loading" problems. It is going away when pressing during a while the "open" button. Now since yesterday the noise is occuring when playing DVDs and the only way to get rid of this problem is to unplug then replug the recorder (which leads to the loading problem) and then press "open" for a while!! What a wonderful human-machine-interface method! I thought first that the problem was on the hardware, but now this looks like a software problem. Does anybody know if the firmware upgrade fixes such problems? In advance thank you for your feedback!

Posted on Jan 27, 2007

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 3,130 Answers
Re: Sound Interference

NO it dosent sound like there related problems at all. Now you say you get interferance or is it more like a static noise only when using the dvd player??? If thats the case then you have an output device problem as its breaking down and crackling into your input to your sound amp or the tv. Its a problem that will need to be traced with a scope and a test disk. as it could be a D to a converter or an op amp IC, or even as simple as a filter cap. Good Luck

Posted on Apr 12, 2006

3 Suggested Answers

  • 1 Answer

SOURCE: DVD/Video recorder blinking

This is an issue for this machine. It happened to me, and after some internet research, I found that JVC acknowleged it (on their web site). The unit was still under warranty, and JVC had me ship it to them for repair. It was fixed... for about a year. It started doing the same thing recently. I only had enough time to discover that I hadn't purchased any extended warranty, then the thing quit altogether. Wouldn't even power up, wouldn't eject the tape or DVD that were inside. I gave up, and took the case off to recover the tape and DVD. What I found inside was what looked like any DVD or CD drive from any computer. Since I had a case for an external IDE drive, I hooked it up to my Mac using that drive. Good news! Not only did it eject my DVD when I pushed the button, I found that my Mac with OS X Tiger recognized the drive! With absolutely NO software installation (not even a driver), My Mac now burns DVDs beautifully on that drive using Toast. At least I salvaged something really good from that piece of junk sold by JVC.

Posted on May 24, 2007

  • 5 Answers

SOURCE: Noise interference

I had the same fault - only answer is to take/send to the nearest JVC repairer. (Cost me £68 which included a £45 service fee!)

Posted on Jan 28, 2008

  • 1067 Answers


cheak sound output settings and cable to pcm not dolby digital

Posted on Feb 02, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Unit no longer powers on

Sounds terminal.
Is the movie yours? How mechanically inclined are you?
If not so much, better bring it to a professional to remove the movie.

Dec 01, 2009 | RCA DRC290

1 Answer

Sound issues?

Yeah, your remote has a volume control under the audio button, turn it up.  --Bob---

Aug 05, 2008 | Philips DVP3960

1 Answer

No Sound

I had the same problem but I unplugged the unit to reboot it and the sound came back

Feb 10, 2008 | Toshiba RD-XS35 DVD Recorder/HDD Recorder

1 Answer

Speaker hum on playback with tape or dvd

Any cable? Hum is generally a bad ground. If you use cables and speakers that have no hum elsewhere, and more than one set has hum on this machine, then the unit has a grounding problem, and requires repair on an 'open up the unit' basis.

Jan 11, 2008 | RCA DRC6300N DVD Player/VCR

4 Answers

Dvd player stuck in 'demo repeat mode'

press and hold the power button for about 5 seconds to reset the player

Aug 13, 2007 | LG DN798

4 Answers

Yamaha dvr-c300 dvd playeer

Hi sponge your lens is the problem call a tech to look at your set.good luck.

Apr 26, 2007 | Yamaha DVR-S200 DVD Player

Not finding what you are looking for?
JVC DRM10 DVD Recorder Logo

194 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC DVD & Blu-Ray Players Experts

The Knight
The Knight

Level 3 Expert

66509 Answers


Level 3 Expert

94039 Answers


Level 2 Expert

224 Answers

Are you a JVC DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides