Question about Bunn -o-Matic G3 (3 lb. Commercial Coffee Grinder)

1 Answer

No power bunn-o-matic

When I press the start switch there is nothing. Is there a fuse or reset for the motor? Please help

Posted by on

  • air1 Sep 12, 2008

    Thank you,I found the reset button as you said but it did not click and reset.Still nothing. Motor must be burnt out???????????

    Erik

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 60 Answers

Look on the right side of the grinder, there is little cover. Pop the cover off and press the reset button.

Posted on Sep 11, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My green light flashes but fan does not spin and it does not cool. any advice?


drink o matic power cord Questions & Answers - Fixya

www.fixya.com > Forum > Tags
Get free help, tips & support from top experts on drink o matic power cord related issues. ... the drink o matic? the green light wont turn on on the back. the fan wontturn ... stopped working Hi, I have a Smart Planet Drink-O-Matic model # DR3. ... The machine does not cool. ... I have the same machine, my power supply was .

[PDF]UNIT 5 TROUBLESHOOTING - Bunn

www.bunn.com/.../troubleshooting.pdf

Bunn?o?Matic CorporationGiven a realistic scenario when product does not freeze or chill, the learner will be able to ... The learner will be able troubleshoot the torque (ice) system.Missing: sharper ‎image ‎green

[PDF]Operating, Service, CDS-2, CDS-3 Operating ... - Bunn

www.bunn.com/sites/.../27646.0000.pdf

Bunn?o?Matic CorporationTo obtain the Illustrated Parts Catalog, visit the Bunn-O-Matic website, at www.bunn.com. .... In no event shall Bunn be liable for any other damage or loss, including,but not limited ... NOTE - Bunn-O-Matic does not recommend the use of any extension cord .... THREE QUICK FLASHES - Low auger torque is being sensed.Missing: sharper ‎image ‎my

Free Kitchen Appliance User Manuals ' ManualsOnline.com

kitchen.manualsonline.com/

Jan 05, 2016 | Sharper Image Drink-O-Matic

1 Answer

4 red blinks, open limit switch. Replaced limit switch, still getting red blinks.


your ventor motor has to come on first to close limit switch,follow tubing from switch to ventor motor see iffu have 120 volts going to it, if 120 volts replace ventor motor assembley, no reset on board, board will reset every time u turn of power and back on

Dec 30, 2015 | Heating & Cooling

1 Answer

I have a Kenmore 70 series an it won't come on at all.where is the reset button at


DOES NOT HAVE A RESET BUTTON..

Electric dryer no start does nothing

Check dryer Terminal block prongs both outside prongs should give combined 220, and 110 each if u check 1 outside & 1 center (ground) prong. Also check house electrical outlet for full voltage.

CHECK THERMAL SHUT OFF THERMOSTAT USUALLY LOCATED ON THE BLOWER. for OHMS or resistance with a meter. Should show a closed circuit. Ohms WHEN THIS FUSE BLOWS IT WILL SHUT DOWN EVERYTHING.

NEXT Test the PUSH start switch with meter for OHMS. Should show OHMS when pushed in or on start, and no ohms or infinity when in off position.

If you hear a humming sound from motor area you more than likely have a bad motor.
Try this test out to see if u have weak windings on motor.
Open the dryer door and turn by hand the drum while machine is on ON position. And you or someone else presses the door engagement switch in. If it starts up then u have bad windings

Another thing to check is the belt safety switch. With a multi meter.
Especially if u just replaced the belt. The belt safety switch is attached to the Tensioner and motor. IT LOOKS LIKE A DOOR SWITCH SOMEWHAT a little black pc of plastic with 2 prongs going into it. Sits at bottom of motor. Under the Tensioner. Attach meter clips to the 2 prongs on switch, Then when the little white push button is pressed in it should show continuity and none when released.

Lastly check ut push start button for continuity with a meter when pushed in the on position, it may have gone bad.

Feb 22, 2015 | Kenmore Dryers

1 Answer

Dryer wont start.


Electric dryer no start does nothing

Check dryer Terminal block prongs both outside prongs should give combined 220, and 110 each if u check 1 outside & 1 center (ground) prong. Also check house electrical outlet for full voltage.

CHECK THERMAL SHUT OFF THERMOSTAT USUALLY LOCATED ON THE BLOWER. for OHMS or resistance with a meter. Should show a closed circuit. Ohms WHEN THIS FUSE BLOWS IT WILL SHUT DOWN EVERYTHING.

NEXT Test the PUSH start switch with meter for OHMS. Should show OHMS when pushed in or on start, and no ohms or infinity when in off position.

If you hear a humming/clicking sound from motor area you more than likely have a bad motor.
Try this test out to see if u have weak windings or relay/capacitor on motor.
Open the dryer door and turn by hand the drum while machine is on ON position. And you or someone else presses the door engagement switch in. If it starts up then u have bad windings

Another thing to check is the belt safety switch. With a multi meter.
Especially if u just replaced the belt. The belt safety switch is attached to the Tensioner and motor. IT LOOKS LIKE A DOOR SWITCH SOMEWHAT a little black pc of plastic with 2 prongs going into it. Sits at bottom of motor. Under the Tensioner. Attach meter clips to the 2 prongs on switch, Then when the little white push button is pressed in it should show continuity and none when released.

Lastly check ur DOOR SWITCH for continuity with a meter when the button is pushed in the (on/Door closed position,) it may have gone bad.

https://www.youtube.com/watch?v=sTRP6kHqAFs

Oct 30, 2014 | Dryers

1 Answer

Reset switch location


the reset button is in the on switch what you need to do is unplug from wall socket then press the on button down hard to reset.

Aug 14, 2013 | Dyson Vacuums

2 Answers

Need the back switch that turns the pot on to brew(carlingswitch) for model NHB


For Service Contact:
Bunn-O-Matic (800) 352-2866

They call it "Vacation Switch"

I work on commercial equipment (including BUNN), and they don't use any names like this one in the commercial line.

Jan 14, 2011 | Bunn NHB Coffee Maker

2 Answers

My Bunn BX-B coffee maker wont turn on, no light no nothing. Is there a reset switch, or fuse somewhere in it?


Did you check the switch on the side of the machine(vacation switch) to make sure there is orange/red showing? If it is, please give us a call with the model and code date and we can further assist you. Customer Service # is 800-352-2866.

Nov 11, 2010 | Bunn 10 Cup Home Coffee Brewer

Not finding what you are looking for?
Bunn -o-Matic G3 (3 lb. Commercial Coffee Grinder) Logo

Related Topics:

371 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bunn Coffee Makers & Espresso Machines Experts

Kelley Hopper

Level 2 Expert

60 Answers

gbob59

Level 3 Expert

2992 Answers

yadayada
yadayada

Level 3 Expert

77499 Answers

Are you a Bunn Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...