Question about Quasar TP-2009D 20" TV

2 Answers

Vcr when you push the tap in the door on the tap will not open. and it kiks the tap back out

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer got voted for 20 times.

  • Expert
  • 130 Answers
Re: vcr

Ive seen toys in the slot before, stuff stuck to the bottom of the tape. The door ont he tape can even be stock closed its just a plastic box and some are very cheap. If you old the tape face up there is a littel button on the side if you press that in you can lift up the door. see if the tape is all black, if there is a clear strip it needs to be advanced a few inches.

Posted on Apr 10, 2006

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 3,130 Answers
Re: vcr

Thes happens with every tape?? could be something inside the mechanism like a label fromn a cassette or something dropped in but may also need to be reset..turn on power Power and hold down together the play and Fast forward buttons for a few seconds

Posted on Apr 09, 2006

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Ok we have a vcr a tv and a dvd player we hooked up the tv to the vcr and the vcr to the dvd player and we turned the channel to 3 on the tv and on the vcr to the channel 3 also but we don't have any audio...

YES!! the setup of some units are done only by REMOTE you could try a UNIVERSAL remote but they don't allways provide all the programming features...

Feb 13, 2011 | GE 19GT317 19" TV

1 Answer

I have been having problems hooking up my truflat RCA TV to my Sylvania dvd/vcr player. the cable plug is hooked up to the tv and the dvd plugs are hook up. What else should I do?


If you have connected the audio video out of DVD to audio video in to the TVs front panel; what else to do?. Power up both the devices, goto the menu option of your tV, set it to vidieo mode, open the tray of the DVD by it open-close button, put a dvd disc in, push open close button of the DVD again, take the remote control of the DVD; select the chapter you want to see, sit back easy and see the recordings on the disc. That is all. OK.

Feb 12, 2011 | Sylvania 6419TC 19" TV

1 Answer

Cant get both a VCR & DVD player to work on a SANYO TV, model # DS27590 cause there is no input button. The VCR works using a video button. Is it even possible???

Well if you could gain access to the inside if the set you could locate the Video's Composite Input, and there you could simply "Tap In" there, and run a Coax. OUT for the Video?DVD IN, and similarly, find the Audio's Input, and do the same for that. Then you could, simply NOT provide a signal, IE: Turn on & use, the VCR/DVD. And NOT supply a signal from the VCR/DVD. Instead supply the signal via YOUR leads, and it will NOT know the difference, and display what is being fed into it.

Mar 13, 2010 | Sanyo DS27590 TV

1 Answer

Replacing the bulb in my samsung HLR5667WX DLP TV. I took off the small face plate on the back, but it looks like that bulb is locked in there 20 different ways and the space is small.

After removing the door lift the tab on the bottom of the plastic tunnel and pull it out. There is a philips screw on the left of the back lamp housing. Loosen it. There is a wire handle folded to the side . Pull it open and pull the lamp out.When you put the door back on be sure the tab on the door pushes the door switch downward or tv will keep shutting off when it warems up.

Nov 22, 2009 | Samsung DLP HL-P5663W 56" TV

1 Answer

I have a Toshiba cx35e70 tv. The problem began as a turn on, live screen, no channels, no sound. I found that when I would tap on the tuner on the main board the problem would disappear. Every thing worked...

Is the VCR going through ch 3 or video inputs - if video inputs your TV tuner is likely bad if through ch 3 seeif te picture goes funny on ch 3 without using the VCR the tuner may be bad on higher band channels - smetimes you can remove the tuner and resolder the tuner itself. But if it always works with the VCR just use it that way and don't bother with the fix.

Sep 26, 2009 | Standard (CRT) Televisions

1 Answer

How do i get to the input/video screen on the RCA F32672sb 32

If you have an old vcr hook the dvd player to the inputs on back of the vcr (RCA jacks) Run a coax cable from the "out" on the vcr to the back of tv. Turn the tv on channel 4 or 3 then put a tape in the vcr and push record then pause it. Or if the vcr has a tv/video button you can push or activate it and it should allow the dvd to play through to the tv.

Feb 10, 2009 | RCA F32672SB 32" TV

3 Answers

Need to ask how to Repair my TV.

Check F801 for open and if open replace with 6.3a 250v slo-blo...
If open and replacement slo-blo opens immediately suspect audio Ic2301 Part Number # An5277. Ic shorts and drags down 30v line stressing main fuse.
Always replace C832 using a 35v 220mf. (original is16v/220mf).
Also, another possibility could be the deguass thermistor D808 P/n# D4ddf1r50001 but try the above first.

Dec 15, 2007 | Panasonic CT-36SX31 36" TV

1 Answer

VCR Tape


This sounds like the tape is being stretched which can only mean one thing, the brakes on the supply spool (left side) is engaged and is preventing free rotation of the spool for the source/supply side of the tape. A sure sign that tap is being stretched would be deformation on the edges of the tapes you have used (rewind them just a bit).

Since this involve opening the unit and full disassembly of the mechanical aspect of the VCR, perhaps your best bet would be to seek the services of a qualified VCR technician.

Hope that this be of some help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Nov 12, 2007 | Toshiba MV13P3 19" TV

1 Answer

Connecting my tv and vcr so i can use the vcr remote control

You can always push "03" on a universal remote programmed to work your TV. A better solution is to connect the devices properly. You shouldn't use the tuner inputs for a VCR/DVD player, or you will get a poorer picture and no stereo sound. See the instruction manual for your player and TV. Use a stereo audio/video cable to connect them and select the proper input. The instructions will hopefully clarify this.

Oct 16, 2007 | Philips Magnavox 27MS343S 27" TV

Not finding what you are looking for?
Standard (CRT) Televisions Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Quasar Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66372 Answers

Joshua Lavinier

Level 1 Expert

11 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Quasar Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides