Question about Car Audio & Video
Guess you figured out?
Posted on Sep 22, 2008
Two questions to narrow this down - one, is it an aftermarket stereo, or a factory one? Two, with the key out of the car, can the stereo be turned on?
If it's aftermarket and it powers on when the key is off, then it's likely two wires are reversed in the harness behind the deck - the constant 12v wire and the switched 12v wire. The constant one is the yellow one, which always supplies power to the deck, keeping power there for the preset memory and the tone settings. The ignition-switched one is so that when the key is turned off, the stereo shuts off (this is the red wire on the harness). If these were reversed, the stereo would always be able to be turned on, and power to the memory settings would be lost when the key is turned off.
Posted on Sep 11, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
May 07, 2011 | Planet Audio P9725B / P9720 Car Video...
Mar 08, 2011 | Virtual Reality VRCD500-SDU CD Player
1 Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
2 Press (PRESET).
The Preset screen is displayed.
3 Rotate the Double Action encoder to select the
4 Press and hold /ENTER for at least 2 seconds.
The selected station is stored.
The display shows the band, preset number and station
• A total of 18 stations can be stored in the preset memory (6 stations
for each band; FM1, FM2 and AM).
• If you store a station in a preset memory which already has a station,
the current station will be cleared and replaced with the new station.
• Press in the outer ring and rotate the Double Action encoder to the
left or right on the Preset screen, you can switch the Preset screen of
FM-1 FM-2 AM FM-1
You can also change the desired radio band by pressing BAND.
Hope this helps.
Feb 25, 2011 | Alpine iDAX305 MP3USB Car Radio Car CD...
Jan 03, 2011 | Panasonic CQ-C7103U CD Player
Sep 09, 2010 | Pioneer DEH-P6800MP CD Player
Mar 11, 2010 | Car Audio & Video
Nov 04, 2009 | Sherwood RVD-6095R Receiver
Jan 07, 2009 | Blaupunkt Boston C32 Cassette Player
Feb 25, 2008 | Alpine CDE-9842 CD Player
95 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: