Question about Sharp AR-5316 Advanced Digital Imager Copier

2 Answers

ERROR CODE 4H ON AR-5316

When copier is switched on error code 4H appears and copier cannot be operated.
Solution required urgently please.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 24 Answers

Before you go changing parts i recommend that you do a machine reset.
Perform the following procedure to enter the simulation mode.
"#" key Interrupt key "C" key Interrupt key
Main code 14 Start key then CA
Machine will reset, if problem is still there you will have do what checkitright says and reset the error code once you have fixed the problem.

Posted on Sep 12, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Sharp Master
  • 1,346 Answers

There is a problem with the fuser unit ( exit where it gets hot), unfortunately you need to replace
either 1- thermofuse, 2- thermistor, 3- heater lamp

Posted on Sep 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

AR-5320 PHOTOCOPIER IS SWITCHED ON THE ERROR CODE 4H APPEARSAND THE MACHINE CANNOT BE OPERATED. IT IS VERY URGENT....


The code is H4. The heating element in the fuser (hot roller) section is not working. Requires a trained technician.

Dec 27, 2012 | Sharp AR-5320 Black and White Copier

6 Answers

Sharp ar 5516 printers error h5. h4


hi,I have error code L h on my coppier sharp 5516. your help please.

Aug 05, 2010 | Sharp AR-5316 Advanced Digital Imager...

2 Answers

My sharp copier AR-5316 has the problem. Error code 4H appear and cannot copy.


Hello sir; You need to do a reset procedure as follow; Press "#", "interupt", "C", " interupt". then enter 14 press start, machine go back to normal.

Oct 09, 2009 | Sharp AR-5316 Advanced Digital Imager...

4 Answers

Code H4 comes up when the sharp copier ar-5316 is switched on. it cannot be use. what shall I do to solve this problem of error code H4.


Hello sir; H4 code require reset procedure as follow;
1, press"#" "interupt" "c" "interupt" these 4 keys.
2, enter 14 , then press start
3, turn power off and back on .

Jan 28, 2009 | Sharp AR-5316 Advanced Digital Imager...

2 Answers

Error L4


This Code shows a mechanical problem. Main Motor doesn't run, or run slower. See gears.

Jan 15, 2009 | Sharp AR-5316 Advanced Digital Imager...

2 Answers

Error h4


it is on you fusing unit of your copier, check the fuse maybe it is open already and need for replacement... H4 means that your heater lamp is not functioning


franklin

Jan 07, 2009 | Sharp AR-5320 Black and White Copier

1 Answer

Error code 4H


Performing a Fault Reset 14 will reset your WorkCentre and will help to clear error codes.
  1. Find the pink Clear button on the Control Panel of the WorkCentre.
  2. Find the button below the word Auto.
  3. Press these buttons in the following sequence: [Clear], [Auto], [Clear], [Auto] NOTE: All of the lights on the Control Panel should go out and the LED Display should go blank. If the lights do not go out, then repeat step 3 until they do. It may be necessary to increase or decrease the pace of the [Clear], [Auto], [Clear], [Auto] sequence.
  4. Press the [10's] key one time and the [1's] key four times to enter '14' in the LED Display, as if you were to make 14 copies.
  5. Press the green [Start] button.
  6. Press the pink [Clear] button two times.
  7. The WorkCentre should now warm up and come to ready.
  8. If the above steps do not clear the error code, repeat steps 3 to 6 a second time.

Apr 15, 2008 | Sharp AR-5316 Advanced Digital Imager...

13 Answers

Error code 4H on sharp ar 5316


WHEN THE SHARP AR-5316 PHOTOCOPIER IS SWITCHED ON THE ERROR CODE 4H APPEARSAND THE MACHINE CANNOT BE OPERATED. IHAVE TRIED THE SOLUTION SUGGESTED JUNE THIS YEAR BUT IT DID NOT WORK. WHAT CAN I DO TO GET THE MACHINE TO WORK? IT IS VERY URGENT.

Feb 18, 2008 | Sharp AR-5316 Advanced Digital Imager...

Not finding what you are looking for?
Sharp AR-5316 Advanced Digital Imager Copier Logo

270 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Printers & Copiers Experts

George Mclaughlin

Level 2 Expert

330 Answers

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

Vito Suglio

Level 1 Expert

23 Answers

Are you a Sharp Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...