Question about Maytag Dishwashers

1 Answer

I have a Maytag Dishwasher MDB6601AWW. It went through a normal wash and we loaded it and it now will not start. It flashes 1H, 2H, up to 9H. It has flashed 81. What do these codes mean?

Posted by on

  • ilost50ucan2 Sep 11, 2008

    My dishwasher is barely 2 years old!
    I thought the name Maytag was good quality. Next time I'll just go with the cheaper brands like in the past, they last closer to 10 years and more.
    Thanks anyway,
    Marlo


  • Anonymous May 08, 2009

    My Maytag MDB6601AWB dishwasher is 14 months old. Factory says this is not an error code but cannot explain the problem. Flashes "81" for a minute or so then all lights shut off. Please help if you know what the problem is. Thanks.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 166 Answers

Peace Friend,
ngafm At your service!

You said,you have a Maytag Dishwasher MDB6601AWW. It went through a normal wash and you loaded it and it now will not start. It flashes 1H, 2H, up to 9H. It has flashed 81.

With an error code the only way to find and to repair this is,
First unplug the washer and wait a few minutes then restart it like rebooting your computer when its acting strange!
If it corrects the problem, GREAT!


If not only a trained laundry tech can make the electronic diagnoses.
Like we used to be able to fix my own cars, but not today they need diagnostic equipment!


How old is the washer?

If the appliance is 10 years old or more you it may not be advisable to put good money into bad!
New appliances are so much more efficient today that they can save you a lot of money in energy!!!!
Water,Electric and detergent! And put money back in your pocket!
The new appliance will pay for itself in only a few years!


You will be fine
Bless You ngafm
PLEASE GIVE ME A GOOD RATING HERE AT FIXYA.COM BEFORE YOU SIGN OFF.

Posted on Sep 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Model #MDBTT792CG serial #16473992CG I am getting


I suspect you have your dishwasher set for a 1 hour delay start. Press cancel and restart in a regular/normal cycle and see if it programs.

Jan 13, 2011 | Maytag 24" Built-In Dishwasher - White

1 Answer

Dishwasher ran all night still not finished. Error code 4H displaying.


Hi and welcome to FixYa. I am Kelly. The 4H is indicating your dishwasher is in the delayed wash start mode. Here is some information from Sears about what to do:


  • The number letter combination indicates that the dishwasher is in a "Delay Start" mode, as well as how many hours were set for the delay start.
  • The dishwasher will not start the wash until it reaches the delayed hour that it was set for. Example: 1H = 1 hour delay start, 2H = 2 hour delay start, etc.
    • To start the dishwasher immediately and not wait for the Delay Start time, cancel the "Delay Start" option, by pressing the Cancel button. Then program the cycle and options and press Start.
    • To start the dishwasher after the Delay time, select the cycle and options desired. Select the "Delay Start" option and on some dishwashers it requires, pressing the Start button.
    • Some dishwashers will display a countdown of the delay time on the display.
Note: Refer to the Owner's Manual or Use & Care Guide for specific instructions on using the "Delay Start" feature.

If you need more assistance we will need your exact model number in any of your future responses.
Thanks for choosing FixYa,
Kelly

Jan 04, 2011 | Dishwashers

1 Answer

2H accures in digital read out. NO Cycles start, just a humming


Do you own an LG LDF6810ST dishwasher? If not, please reply with the manufacturer name, model and serial number.
Are you saying that the display that normally shows the time is displaying an code of 2H? On an LG, that means 2 Hours, (120 minutes) and is not an error code.
On an LG with a symptom like this, I would arrage to replace the main processor card (PCB). You would be getting an error message if the motor (wash or drain) had failed.

Mar 30, 2009 | LG LDF6810ST Stainless Steel Built-in...

1 Answer

Maytag MBDTT70AWW Dishwasher will not start


Had same problem. Repair tech said controller board needs replacement. Cost $300. His suggestion was buy a new dishwasher.
I did

Mar 11, 2009 | Dishwashers

3 Answers

I am gettting a message on my dishwasher that says 1h


I think that the delayed use is engaged.  Wait an hour, and it will probably start up on its own.

Jan 10, 2009 | GE 24 in. Profile PDW7800 Built-in...

2 Answers

Maytag dishwasher, no power, then flashing lights, now no power.


Had the same problem, removed the kick panel to find a set of instructions under the insulation, had to push a sequence of the panel buttons, its been running great for a couple of weeks now!
Jeff

Dec 23, 2008 | Maytag MDB7100AWB Dishwasher

1 Answer

Maytag dishwasher error code "1H" MWB6601AWB


The 1 H is not a fault code it is the delay time of one hour.

May 10, 2008 | Dishwashers

9 Answers

I can't get my dishwasher to start


try pressing normal wash, then heat dry normal wash then heat dry normal wash then heat dry. do it 3 times

Jan 27, 2007 | Maytag MDB9600A Jetclean II Built-in...

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

641 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Mike

Level 3 Expert

4332 Answers

Are you a Maytag Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...