Question about Husqvarna Huskylock Computerized 936

3 Answers

Huskylock 936 I have a new Husqvarna, Huskylock 936 and I have lost the user's manual (%@!$@!&!~^!).  Can anyone advise where I can get another one?  I have been searching and waiting and searching all over (even eBay) and I haven't been successful yet.  Any help you can provide would be most appreciated! Thank you, Lauri P.S. -  You can also email to me @   Spoilermom@hillsmountain.com

Posted by on

  • 5 more comments 
  • cas_scrapboo Oct 12, 2008

    I would also like to find ot where to get a sers guide

  • Anonymous Nov 19, 2008

    I need to find an instructions manual for Huskylock 936, can I download it anywhere?

  • sfp30 Dec 05, 2008

    I am also desperately looking for a 936 manual and can't find it anywhere! Have you had any luck?

  • vosbergs Dec 17, 2008

    I also lost my Huskylock 936 user's manual and I need one to know what I'm doing right and wrong. Help!!!!

  • valapo Dec 19, 2008

    I have lost mine and desperately need one huskylock 936 mnuala

  • lynnmargaret Dec 22, 2008

    I lost my book too. Do you know how to replace the needle? I cannot get to it because the presser foot bar is just behind it. Very hard to get to. Any ideas of how to unscrew it? Lynn

  • cfraker51 Jan 28, 2009

    I lost my 936 manual when we moved and can not locate one.

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I found a copy here:

http://www.husqvarnaviking.com/us/Huskylock_936_Owners_Handbook_x_.PDF

Posted on Jul 06, 2012

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Http://www.husqvarnaviking.com/us/Huskylock_936_Owners_Handbook_x_.PDF

Posted on Feb 03, 2012

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The manual is useless for beginner trying to thread the machine - and the DVFD is not much better.

Help

Posted on Feb 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a huskylock 936 coverstitch plate and foot. anyone have that for sale?


You may want to keep an eye on parts or donor machines on eBay. Or a sewing repair shop may have what you need.

...

Jul 18, 2016 | Husqvarna Huskylock Computerized 936

2 Answers

936 Huskylock needle bar does not move up and down.


First, make sure the machine is engaged to sew. some machines,
have a knob inside the flywheel on the left side that disconnect the sewing mechanism to wind a bobbin without the needle bar moving.
Cheers,
Embroidery Services
San Diego, CA

Jun 15, 2016 | Sewing Machines

1 Answer

How do you sew with three needles on huskylock 936. I can't seem to find a third spot for a needle.


A 936 has 5 needle positions. C & D are in the back position and AB&E are in the front position. Check your user manual for diagram. you can view, print, or download the manual from the viking website - http://www.manuals.husqvarnaviking.com

Jul 12, 2014 | Husqvarna Huskylock Computerized 936

1 Answer

How to oil huskylock 936?


check the user manual (toward the back of the manual). Manuals can be viewed, downloaded, or printed at http://www.manuals.husqvarnaviking.com

Jun 01, 2014 | Husqvarna Huskylock Computerized 910

1 Answer

Can I adjust the LCD screen of the Huskylock 936?


If it does not say anything in the manual about it then there is a high probability that the display is fading out and needs to be replaced.

Feb 23, 2013 | Husqvarna Huskylock Computerized 936

1 Answer

Huskylock 936 error code


This will also occur if the "needles" and "loopers" lock up as though threads are tangled and binding the machine. If needles and loopers move freely when manually turning the handwheel counter clockwise, you probably need to take it to an authorized husqvarna viking dealer for service. You can locate a dealer near you by visiting the husqvarna viking website and clicking on the Dealer link on the left-hand side of the page - http://www.husqvarnaviking.com

Good luck.

Nov 28, 2009 | Husqvarna Huskylock Computerized 936

1 Answer

Huskylock 936 Motherboard Replacement


Any qualified Husqvarna technician should be able to order one for you. I would recommend that you have it installed to save yourself the heartache/break.
A main board, if I am looking at the correct one on the list, will run about $240.

Aug 15, 2009 | Husqvarna Huskylock Computerized 936

2 Answers

My Husqvarna 936 Serger is giving me a "overloaded" message on the screen. I am serging the edge of a sheet. Please advise.


This happened the first time I used a 936. I had borrowed it from a friend. Fortunately she was with me. the dealer found it needed to be oiled in places amateurs should not go. That was all it took. Oiling all the moveable parts.

Apr 15, 2008 | Husqvarna Huskylock Computerized 936

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

962 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Sewing Machines Experts

Douglas Plant
Douglas Plant

Level 2 Expert

165 Answers

Bargain Box
Bargain Box

Level 3 Expert

1388 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Husqvarna Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...