Question about Kitchen Ranges

Open Question

GE Profile Microwave/Oven combo wall unit - microwave not working

Model JTP965-30. The microwave has stopped working, but the oven works fine. This is a combined unit. Nothing works on microwave - lights, buttons, etc. It was in the middle of heating and went off. Happened several days ago and came back on, but happened again yesterday and still not working. I'm afraid of an electrical problem with then entire unit. Is it okay to use the oven? Help!

Posted by on

  • karenbasco Sep 27, 2008

    i have been using my oven for 3 months, but miss the microwave. Mine is JKP76GP unit - Is this fixable with a replacement of a fuse> tell me it's something simple!

×

4 Suggested Answers

  • 126 Answers

SOURCE: replacing only the microwave in Jenn-aire oven combo unit

i dont think so i would check around

Posted on Dec 10, 2007


jumptrout51
  • 3361 Answers

SOURCE: GE Profile gas range - stove works, oven doesn't heat

Set the oven for bake. Wait a couple minutes and look in the oven. If you see a orange glow the ignitor is working, but, may need to be replaced.
If you see no orange glow the ignitor definitely needs to be replaced.

Posted on Feb 21, 2009

leroyal
  • 2120 Answers

SOURCE: Oven won't heat. No gas smell. Broiler and stove work.

Bad oven control circuit board. Look up on eBay

Posted on Feb 21, 2009

  • 4 Answers

SOURCE: Whirlpool Gold electric range control panel not working

I live in a new 500 home subdivision. The contractor ordered all Whirlpool Gold products including Electric and Electric/Gas Ranges. Many of my neighbors' panels have gone out! I'm talking about epedemic trouble. My son has had his oven panel (separate from stovetop) fail within the first year. Thank God it was under warranty...this is not a cheap replacement (he had the sensor touch pad. I just had my oven pad fail. I tried to set the clock for Daylight Savings and found out half my panel is out! The fix is a replacement of the panel. Depending on which model (push or sensor) look to spend at least a couple of hundred bucks. We have the Whirlpool Gold microwave panel and so far so good. My neighbor and my son's both went out! They just tossed the two year old products and replaced them with another brand. Sorry to break you the news...class action anyone?

Posted on Mar 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Receiving F7 error code while cooking turkey model # GLEFM397


FIXED GE Profile Oven F7 error messages - ApplianceBlog

www.applianceblog.com/.../2655-GE-Profile-Oven-F7-error-messages

Jan 13, 2006 - 10 posts - ‎2 authors
My GE Profile built in convection/thermal wall oven constantly flashes F7 errormessages. ... Three of my neighbors and I have the same GE profile double oven (new home development) and we've all have the same problem as you described-F7. ... GE Oven F7 error message solution. LG Electric oven not heating. F7 error code
2 posts
Jun 9, 2015
FIXED Kenmore Double Oven error code F0 and F7
10 posts
Aug 31, 2010
More results from www.applianceblog.com

Nov 14, 2015 | Frigidaire Kitchen Ranges

1 Answer

My Superba microwave is no longer heating food. (double wall unit, microwave on top, oven on bottom) Does the unit have to be removed from the cabinet to locate the part that is no longer working?


Hi, Yes, you will have to take it out..
Here is a tip that will help you to figure out what is wrong with yourMicrowave Oven....

Microwave Oven Basic Troubleshooting Tips

heatman101

Sep 30, 2010 | Kitchen Ranges

1 Answer

My GE Oven Px7 is about 12-15 yrs old and when we last used it the beep was continual and we pressed the button for it to stop and the digital screen went blank. We now get no beeps or anything on the...


I inherited a px7 electric microwave stacked oven, and on days like today I want nothing more than to just get rid of it! How do I use the self cleaning feature? The instructions seem simple enough but I just cannot get it to work.

Jun 16, 2010 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

Describe your GE Profile Spectra XL44 Oven


My GE Profile Convection Microwave Oven will beep and display a F2 for no apparent reason. What is this?

Mar 09, 2010 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

I want to replace a 1986 GE spacesaver microwave and replace it with a new microwave. The GE Spacesaver oven does not come away from the wall. All 4 bolts into the top of the oven are removed. It is no...


There are three things that can hold it up still.

1. Is there is an 1 inch tall duct piece that holds all the ducting to the microwave on top. look for screws going down to hold in place. Right and left side.

2. If you remove the top grill you will see to screws on the left and right side that go to the back of the microwave they hold to the back wall plate. about 1 inch down and 1.5 inch in from side.

3. Plug wire can hold it in place also but not likely. Just need to pull top down first.

If you have model number I will try to help more sense all are different on mounting.

Dec 21, 2009 | Kitchen Ranges

1 Answer

Getting squeaking noise above oven section when turn on oven. I think it's exhaust blower above oven (not convection blower in rear) from kichenaid wall oven/micro combo KEMS377GBL0. Think part # is...


Looks like it may be the stirrer blade that is making that noise.
I think you are gonna have to take the oven down to get to that.
I have the manual and that pretty much makes it very easy to repair this oven. Here it is:

Microwave Oven Hood Combo Service Manual

To get an idea of how your oven works read my blog on this:

Granny's Nuke Notes

Nov 05, 2009 | KitchenAid Kitchen Ranges

1 Answer

Microwave takes too long to heat


Test the high voltage capacitor, the rectifier diode.or the magnetron. If all this are fine, test the control board.

The diode and capacitors can br tested. The capacitor must be allowed discharge before testing, or you risk to get electrocuted, even if power is off. Capacitors can get discharged by shorting their two contacts.
Replace the magnetron if the checks and all of the high voltage component tests are good, but the unit still does not heat.

All locations, and description of this parts can be located using the diagram here: Counter top.

Parts must be tested to find out what is wrong.

Remember that microwaves are potentially dangerous devices if not repaired properly, the job must be done by a competent person.
A microwave energy leakage test must always be performed when the oven is serviced for any reason.

Regarding parts, contact the seller here to purchase parts. (here in UK).

Apr 27, 2009 | GE Kitchen Ranges

1 Answer

Oven wont turn on


If your microwave oven doesn't seem to work at all, check these:
Fuses Usually, when your microwave oven doesn't work it all, the internal fuse (thermal fuse) is blown. This fuse protects both you and the oven. When it blows, you need to have a qualified appliance repair technician replace it.

Door switch If the fuse isn't the problem, check the door hooks and the door-release button. When these are broken, the door switch doesn't activate, so the oven can't work.

Feb 10, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...

3 Answers

Whirlpool combination microwave/oven wall unit.


Give me the complete model # that is on the oven and I will see if I can help.

Oct 19, 2007 | Kitchen Ranges

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

503 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

yadayada
yadayada

Level 3 Expert

64034 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...