Question about Belkin PC Desktops

1 Answer

I had a home network set up between 2 Dell Dimensions computers Computer 1.) which as the broadband modem and Netgear Router on it "this computer is a windows xp". Computer 2.) with the Belkin Adapter is a Windows Vista. Up untill just recently both computers were fine then suddenly The Vista with belkin lost its connection now I cant get it back ive tried uninstalling it and then reinstalling it butI cant get the belkin adapter icon to appear in the system tray tool bar.when i click on the properties it comes up unable to find file. many times ive tried reinstalling but the icon will not show up? Could you please help me i filled in an online form at Belkin support but noone as got back to me and its been some time. Thank You Sharon McCracken dm012w7863@blueyonder.co.uk

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,961 Answers

Assuming you can't get it to run from the desktop icon, as long as the driver is installed which it should be, you don't need Belkin software to run your connection.

the easiest way in Vista is to go to control panel>network and sharing centre and see if network discovery is ticked green.

If not on top left of window is connect to a network, then see if your wireless connection is listed, if so click connect, if not at the bottom of the window, click set up a connection or network and follow the wizard.



Posted on Sep 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a Dell inspiron 537 sesktop pc and the lan adapter is not recognizing the ethernet lan connection. I reinstalled the drivers etc but it still show " not connected ". Is there anyway to...


To connect to the Internet, certain hardware and services are needed, which are listed below. Without any one of these items, connection to the Internet is not possible.
  • Broadband Internet Service (also known as Internet Service Providers or ISP) - Telephone companies (also known as DSL, which uses a telephone line) and cable TV companies usually offer Internet service.

  • Broadband Modem - Normally, a broadband modem can be rented or purchased from the ISP.

  • Computer with a Network Adapter - This is usually a device located inside the computer.

  • Broadband Router - A router is used to connect all of your computers to the network (but is not needed for a single computer). The router also provides a way to connect to the Internet through the Broadband Modem.

Oct 12, 2011 | Dell Inspiron 537 (DDCWQA1_7) PC Desktop

1 Answer

How do i connect a netgear wireless router to comcast modem


Unplug your Comcast modem from your electrical outlet. Connect the Ethernet cord from the back of your Comcast modem into the Ethernet port labeled "Internet" on your new router. Connect an available Ethernet port from the back of the new router to the Ethernet port on the back of your computer.


Plug your cable modem into an electrical outlet. Plug your new router in an electrical outlet.


Reboot your computer. Click on "Start," then "Control panel." Click "Network and sharing." Select "Set up a new home network."

Click on the option for a router or cable modem when prompted by Windows to select your hardware. Your computer will attempt to access your new router. When the brand name for your router is listed, double-click it so your computer can configure itself to the new router.


Create a new name for your home network and create a unique password to prevent unauthorized users on your network. Your computer may reset your Comcast modem and router so your new changes can take effect.

Nov 04, 2010 | PC Desktops

1 Answer

Howto set up netgear router to my computer?


Turn your cable-modem (or DSL-modem) off.
Turn your computer off.

Unplug one end of the Ethernet cable from the network-port on your computer.

Plug that end into the WAN port on the router.

Take another Ethernet cable, and connect one of the LAN ports on the router to the network-port on your computer.

Turn the cable-modem on.
Turn the router on.
Turn your computer on.

Done -- the 'default' configuration in the NetGear works, 100% of the time.

Sep 26, 2010 | PC Desktops

1 Answer

Just bought PB Ixtreme x5620. i am trying to connect my virgin broadband to the pc. i have netgear router which has the yellow cable in the moden and router and the blue cable in the PC and router. i can...


Hi,

Can you supply more detail of your network setup? You have a broadband modem, a seperate router and the PC.

For this setup cabling should be ....

1. Phone Socket (Pref. Master socket) to ADSL socket on modem

2. Modem LAN socket to Router WAN socket

3. Router LAN socket to PC Ethernet socket

Usually in this configuration you will have to switch off DHCP on either the modem or the router as they may both be trying to supply IP addresses to your PC. I would suggest disabling DHCP on the router and leaving the ADSL modem to supply IP addresses. If you do this you will have to setup the Router with a valid fixed IP.

Have fun!

Cheers,
Ripface.

Oct 25, 2009 | PC Desktops

1 Answer

I have netgear wpn824 wireless router and it works fine until I try to connect to my work server through their Sonicwall VPN. If I unplug the netgear and go straight into my computer through the DSL modem...


Two routers on two different sets of internal IP addresses will cause all kinds of conflicts. A VPN router is even worse. VPNs (virtual private networks) are designed to create encrypted tunnels between two computers. The computer its set to connect to must be authorized either as a user or a device with proper credentials. If your VPN authorizes devices based on MAC addresses, then unless your router's MAC address was previously authorized, youre not going to connect. Lets take the router out of the equation for a second. Do you have a working broadband connection from the sonicwall that the router can be plugged into? If you do, then you can treat this connection to your router like its a cable modem or DSL. If this connection has manual settings (such as IP address, default gateway, and primary and secondary DNS addresses) you will need these settings too. Post back and keep us updated...

Jan 17, 2009 | PC Desktops

1 Answer

How to connect wireless router, Netgear WGR614, to my computer?


4 steps to set up your home wireless network
1.
Choose your wireless equipment
The first step is to make sure that you have the equipment you need. As you're looking for products in stores or on the Internet, you might notice that you can choose equipment that supports three different wireless networking technologies: 802.11a, 802.11b, and 802.11g. We recommend 802.11g, because it offers excellent performance and is compatible with almost everything.
Shopping list
• Broadband Internet connection
• Wireless router
• A computer with built-in wireless networking support or a wireless network adapter

A wireless router
The router converts the signals coming across your Internet connection into a wireless broadcast, sort of like a cordless phone base station. Be sure to get a wireless router, and not a wireless access point.
A wireless network adapter
Network adapters wirelessly connect your computer to your wireless router. If you have a newer computer you may already have wireless capabilities built in. If this is the case, then you will not need a wireless network adapter. If you need to purchase an adapter for a desktop computer, buy a USB wireless network adapter. If you have a laptop, buy a PC card-based network adapter. Make sure that you have one adapter for every computer on your network.
Note: To make setup easy, choose a network adapter made by the same vendor that made your wireless router. For example, if you find a good price on a Linksys router, choose a Linksys network adapter to go with it. To make shopping even easier, buy a bundle, such as those available from D-Link, Netgear, Linksys, Microsoft, and Buffalo. If you have a desktop computer, make sure that you have an available USB port to plug the wireless network adapter into. If you don't have any open USB ports, buy a hub to add additional ports.
2.
Connect your wireless router
Since you'll be temporarily disconnected from the Internet, print these instructions before you go any further.
First, locate your cable modem or DSL modem and unplug it to turn it off.
Next, connect your wireless router to your modem. Your modem should stay connected directly to the Internet. Later, after you've hooked everything up, your computer will wirelessly connect to your router, and the router will send communications through your modem to the Internet.
wireless_chart.jpg Next, connect your router to your modem:

Oct 29, 2008 | PC Desktops

2 Answers

9/2007 my daughter purchased a Gateway notebook and a Netgear router. She opted to not secure the network through the router at that time. I recently purchased a Gateway notebook and am using my daughter's...


It sounds like you need to reinstall the driver for the Realtek network interface card (NIC). I recommend accessing the Gateway web site to find the model number of the laptop, and then download the driver for the Realtek NIC. This should restore the functionality.

Oct 04, 2008 | Gateway PC Desktops

1 Answer

Need to connect router to deck top.comp.


This might work for you. Now to go in and configure the router thats something totally different.
To physically install the router
Step 1: Connect the power adapter Connect the power adapter to the router and plug it into an electrical outlet not controlled by a wall switch.
Step 2: Connect the router to the computer Disconnect the ethernet cable that is connecting the broadband modem to the network adapter in the computer. Connect the ethernet adapter in the computer to one of the LAN ports on the router.
Step 3: Connect the router to the modem Connect the ethernet port on your broadband modem to the WAN port on the router.
Step 4: Check link lights and connections
Check the front of the router to make sure the Power, WAN and LAN1 lights are on.

Jun 29, 2008 | PC Desktops

1 Answer

How do i connect up my router


To physically install the router
Step 1: Connect the power adapter Connect the power adapter to the router and plug it into an electrical outlet not controlled by a wall switch.
Step 2: Connect the router to the computer Disconnect the ethernet cable that is connecting the broadband modem to the network adapter in the computer. Connect the ethernet adapter in the computer to one of the LAN ports on the router.
Step 3: Connect the router to the modem Connect the ethernet port on your broadband modem to the WAN port on the router.
Step 4: Check link lights and connections
Check the front of the router to make sure the Power, WAN and LAN1 lights are on.

Jun 29, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin PC Desktops Experts

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Gareth Cockram
Gareth Cockram

Level 3 Expert

657 Answers

Douglas  Erikson
Douglas Erikson

Level 2 Expert

62 Answers

Are you a Belkin PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...