Question about BenQ FP72G+ 17" LCD Monitor

1 Answer

Monitor shuts off during use

My BENQ FP72G starts fine but after 30 min turns off. I wait a few min, turn it on and it lasts about 10 min and turns its self off. This 10 min issue continues.I blew the little dust it had in it out but no change. Is it time to buy another one or is it fixable?

Posted by on

  • cunha Feb 13, 2009

    hi i have the BENQ FP72G.

    i bought it 3 years ago with warraty.

    the first year i only had it for two months and the monitor went black

    while i was looking through the net the power was still on.

    then got it back from the repairs shop and was working fine for another year. then the same thing again ,every year started doing this.

    in my last year of warranty i asked the rapairs person why.

    he said it just needed reseting!

    now its out of warranty can anyone tell me how can i reset it my self

    i would appreciate some help thank you

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,940 Answers

3 years old and generally rated as a Mediocre monitor to begin with, I'd say I'd invest in a new monitor

Here are some replacement options:

http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=2010190020%201309821311%204017&name=%24100%20-%20%24200

Posted on Sep 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, my BenQ FP72G 17 inch LCD Monitor keeps auto-adjusting every 5 seconds and every now and then it will turn itself off and later go on again. Any help ?


Make sure the cables are in well with a good amount of slack, it can cause a problem if your power cable or computer to monitor cable is loose

Jun 30, 2010 | BenQ FP72G (Black, Silver) 17 inch LCD...

1 Answer

Fuel pressure intermittently drops causing sputter and die.


check for 12v constant at your fuel pump if you are not getting that replace your relay.
if you are getting 12 volts at your fuel pump the fuel pump is possible to run tuel it gets warm then shut down to a lower rpm I would then replace the fuel pump

Oct 10, 2009 | 1994 Dodge Ram

1 Answer

Screen just went blank and power light stays


THE PWER TRANSFORMER MY NEED TO BE CHANGED, DUE TO A DECREASE IN AMPERAGE.

Jul 01, 2009 | BenQ FP71G+ 17" LCD Monitor

1 Answer

Corolla shuts off during left hand turns and hard stops


Wow. These are tough to find unless you are willing to roll the car up on it's right side and then check the power to the system. ..
Look for loose connections going through things that might move or the wires connected to the starter (sometimes the power wire is connected to the battery line at the starter solenoid).
Could also be at the ignition switch.

May 19, 2009 | 1990 Toyota Corolla

1 Answer

My Benq screen shuts down 10 seconds after switchung on


it may be overheat or check the cables it will properly connect or not(may be loose connection or damaged). 
click this link for more info

Feb 22, 2009 | BenQ FP731 17" LCD Monitor

1 Answer

Monitor


try by uninstalling the video driver from safe mode and reinstall the driver.if the problem persist then your monitor needs servicing

Apr 02, 2008 | Gateway FPD2275W LCD Monitor

1 Answer

Monitor blacks out after running for about 25 mins


Ok based on just the monitor turning off Lets try this,,
FOR WINDOWS XP
1.) Right click on your desktop
2.) Choose properties
3.) Click on the screen saver tab
4.) Click power
5.) Set The POWER SCHEME to Home/Office Desk
6.) Set the Turn Off monitor to Never
7.) Set the Turn Off hard disk and system Stand By to never
8.) Click apply then ok
9.) Repeat steps 1 - 3
10.) Set the wait time to 30 minutes
11.) Click Ok
12. Shut down and restart your system and wait 30 minutes to see if the monitor will shut off if it doesnt then Your good to go
If it does Then disable the screen saver.. and wait half hour to see what happens

POST BACK HERE AND TELL ME YOUR RESULTS OF THE ABOVE SO WE CAN TRY SOMETHING ELSE

Jan 16, 2008 | Computers & Internet

1 Answer

Benq LCD monitor


I had same problem. No Power at the monitor. what can I do?

Jan 03, 2008 | BenQ T705 17" LCD Monitor

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

222 people viewed this question

Ask a Question

Usually answered in minutes!

Top BenQ Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Tony

Level 3 Expert

2598 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Are you a BenQ Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...