Question about Panasonic TX-32PK1 TV

4 Answers

Picture colours are not right

The picture colours are shimmery, the black isnt black.

Posted by on

4 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: picture colours are not right

Baseball bat (wooden) works best ...... If TV acts broken it might as well LOOK BROKEN LOL anyways good luck fixin your device...

Posted on Mar 03, 2007

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: picture colours are not right

The convergence is not working. Tried using this to eliminate problem but it didn't work.

Posted on Jan 28, 2007

Re: picture colours are not right

Check the video drivers on the crt board also the resistors.

Posted on Jan 16, 2007

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 3,130 Answers
Re: picture colours are not right

Ok we are looking at a number of problems here. Could be simplya misadustment of the black level or the set has bad video or the set needs to be cleaned internally..

Posted on Apr 02, 2006

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

What are signs of picture tube going?

Signs of a CRT going old, are bad focussing, unnatural colours and hues of a certain colour (red, green, or blue) if you watch black/white pictures. In colour pictures, black sequences also show hue.

Jun 13, 2014 | Panasonic CT-32SL14 32" TV

1 Answer

Sirs: I have a new Sanyo 42" TV. We are on

If picture and sound is ok, and there is no colour, your push have sometimes made its system changed. I don't know from where you are, and to which country you belongs. Anyway I'll give you one solution.
Your Sanyo Tv may have multisystem compactable. There are mainly three systems in transmision of TV signals, called PAL [Phase Alternating Line], SECAM [Sequential colour and mamory] and NTSC [National Telivision System Committee]. Most of the europian countries have transmitters with SECAM and NTSC. I belongs to India, and here we have PAL BG system.

If the system has changed in the tv, the picture will not have chroma information, ie ,colour information, and black and white picture will be the result. You just do one thing. Just get into the Menu of your TV, according to its documantaion that you have, and go to the system menu, and make it "AUTO". This will solve your problem. Ok.

Nov 24, 2010 | Sanyo DS31520 31" TV

1 Answer

I have a samsung hdtv and the component 2 does not show the video in only shows in black and white but in component 1 it is fine.if i use component 1 for dvd player it works fine with color and...

pls.set compnent 2 is on and set menu key on remot cantrol select system menu and see on display colour system is not proper . re set colour system is select AUTO and see the pictur is normal and ok.

Nov 10, 2009 | Samsung DLP HL-P5663W 56" TV

1 Answer

I have a good picture But it is too green. Is there an adjustment?

first turn your colur to black and white at front control..behind the pic tube got a card there got 3 variable resistor mark as R G B tune this three control to get pure black and white colour untill you satisfied then adjust back front colour volume must be ok otherwise replace the RGB ic/transister

Jun 03, 2009 | Sharp 13K-M100 13" TV

1 Answer

Connect Philips DVD to Sansung TV

the red and black are the same as the red and white, these are the audio left and right channels. the yellow plug is the video plug. the next thing you have to check is wheather your tv has video 1 and 2 channels

May 09, 2009 | Samsung Standard (CRT) Televisions

1 Answer

Tv picture going green

hi there, you have a color section or video section problem, check the crt board, there may be and open resistor or jumper, check those transistor driver too. check the small board at the back of the crt tube, do some test and see any cold solder. ty

Dec 29, 2007 | Standard (CRT) Televisions

1 Answer

TV colour problem

how did you explain trouble do you have a problem on tv with color
board ,surely a capacitor has few' capacity' for making the driving on
color that can  be rarely

Dec 18, 2007 | Sony FD Trinitron WEGA KV-32FS100 32" TV

1 Answer


Not a home repair take it to a repair store.

May 24, 2007 | Apex Digital PF3230 32" TV

1 Answer

Screen Image is Concave

sony trinitron colour 29ins tv its black and white not colour but the teletext is colour

Sep 01, 2006 | Sony FD Trinitron WEGA KV-27FS100 27" TV

Not finding what you are looking for?
Panasonic TX-32PK1 TV Logo

Related Topics:

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66623 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Are you a Panasonic Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides