Question about Sharp Aquos LC-32G4U 32 in. HD-Ready LCD Television

4 Answers

TV will lose picture then go into standby!

My TV will work fine for about 1 hour than it loses the picture with the green power light still on...then it goes into standby, then turns itself back on. It will repeat this until I leave the TV. If I keep a fan blowing high on the AVC unit it stays on all day. Could this be temperature related like i think or is it a board problem? Do I need to send in? Thanks. Brian

Posted by on

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 3,130 Answers
Re: TV will lose picture then go into standby!

Yes it is a temp problem as you found out for your self Great call on that BUD.. the best thing to do is contact sharp to see if they have had simular problems and if there are any recalls on this model . If not they will instruct you where to send the monitor into to be fixed.

Posted on Apr 02, 2006

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.

  • Contributor
  • 2 Answers
Re: TV will lose picture then go into standby! - Sharp Aquos LC-32G4U 32 in. HD-Ready LCD Television Flat Panel Televisions

I lose my tv image

Posted on Sep 20, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: TV will lose picture then go into standby!

Picture goes out, but audio stays on. This started about 4 days ago. We turn it off, and eventually the picture comes back. Now nothing. Totally black screen.

Posted on Jun 15, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: TV will lose picture then go into standby!

I need a solution for my problem.
Sharp Aquos LC-32D40U purchased 2006
Lost picture when set was 15 months old, Sharp would do nothing, did repair at shop Sharp recommened, cost almost
$ 500. They replaced Scaler Board 8/2/07 now 2/18/08 there is no picture again. Have been advised to junk it before spending more money on it.

Posted on Feb 22, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

When I turn on my 50" Plasma TV the light goes from red to green. The Green LED flashes 14 times then solid. There is a white raster but no picture or sound.

These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
Blinking codes details to many popular brand TVs are given. Surf the site with patience.

May 16, 2015 | Zenith Z50P3 50 in. Plasma TV

1 Answer

My Viore flat panel tv comes on for a few moments, then the lamp and temp/standby light flashes and the screen goes dark. The picture is just fine for the first few moments, and then it goes dark. Any

this is caused by a bad connection, or a faulty back light. It is also something you should have a local repair man have do for you if you are not "tech savvy".

Sep 23, 2014 | Flat Panel Televisions

1 Answer

TV loses picture

Sounds like your picture tube or bulb is going out. It depends on what kind of tv ( rp, lcd, plasma) it could also be a component issue.

Nov 22, 2013 | Flat Panel Televisions

1 Answer

Hi there, i have a baird lcd model j047baird\r\nthe fault i am having is, it stuck in stby. power supply look fine all voltage is there. if i disconnect the lead j5 from main board to invertor the screen...

there is 2 problems that makes this tv have standby fault.. so here they are,!

1.)main av board ---the 8 leg eeprom loses programing just under LVD CABLE TO SCREEN -£14.99 from a guy or if you can program yourself 4.99 for the flash to reprogram,.

2.)POWER SUPPLY FAULT IS MLT199TL PSU. (UA4)AREA, SG3525AN (16 leg) Regulating pulse width modulator.

the first fault all votage at psu will be there ,, 5v / 12v / 24v

the second fault psu will have 5v standby but no 12v or 24v this will stop the secondary from fireing up.. hope this helps.

Jul 31, 2011 | Flat Panel Televisions

1 Answer

When I plug the TV, the green light is ON but no picture no sound

Sounds more like the main power supply problem. You are only getting the the 5v standby voltage.

Oct 28, 2009 | ViewSonic NextVision N3760W 37 in. LCD...

2 Answers

Picture & sound go off for 1-2 minutes, then return.

The most likely the TV has a power supply related problem.
I can't say it's 100% the problem because I can't actually look at the tv over the internet.
If by chance the TV is still under warranty, go that route.
If not under warranty and If you have some electronic experience, you can purchase a Service Manual over the internet and diagnose the source of the problem and fix it by soldering in the new part. The Service Manual will give you circuit diagrams, test points, and part# lists. Usually, cost under $20.

I hope I shed some light on the subject for you.

Jun 27, 2009 | Sony BRAVIA KDL-52W4100 52 in. LCD HDTV

1 Answer

Loss of picture on Pioneer Plasma Tv

i have a pioneer 43 inch bought in 06. tv wont turn on light flashes red the light means standby. what does this mean

Jun 07, 2009 | Flat Panel Televisions

1 Answer

Losing picture

Six blinks error code could be the Thermal Fuse part# 1-910-006-44

Sep 28, 2007 | Sony KDF-E55A20 55 in. LCD Television

Not finding what you are looking for?
Sharp Aquos LC-32G4U 32 in. HD-Ready LCD Television Logo

1,850 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

66477 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Are you a Sharp Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides