How do you get to the aux input in the CD3000?

To switch your Onkyo PA 7SD amplifier to the auxiliary (AUX) input, follow these steps:

1. Locate the input selector: Look for the input selector knob or button on the front panel of the amplifier. It is usually labeled with various input options such as "AUX," "CD," "Tuner," etc.
2. Turn on the amplifier: Ensure that the amplifier is turned on by pressing the power button or flipping the power switch.
3. Select the AUX input: Rotate the input selector knob or press the corresponding input button to choose the AUX input. The label "AUX" should be indicated on the display or selector knob.
4. Connect your device: Connect the audio output of your desired device (e.g., smartphone, MP3 player, or external audio source) to the AUX input on the back panel of the amplifier. Use an appropriate audio cable (e.g., RCA or 3.5mm) depending on the available input/output ports.
5. Adjust the volume: Once you have selected the AUX input, adjust the volume knob on the amplifier to your desired listening level. You should now be able to hear the audio from your connected device through the amplifier.

Aux Input and Echo Devices
Aux input requires a 3.5mm auxiliary cable and a device with aux output capabilities. You may recognize the aux cable as the same type of plug that comes on a standard pair of headphones. An aux input amplifies audio from the output source.

According to the manual, the aux input for the mpv622 is an optional accessory. If it's installed, you select the aux input by pressing the [SRC] button. Select the AUX/AUX1 display. Then press the [DISP] button for two seconds. The selected input blinks. Press the ? or ? to change the input setting.

Download the manual here:
http://a248.e.akamai.net/pix.crutchfield.com/Manuals/099/099CD3000.PDF

flip to page 43. Basically, you push the SEL button until hours is displayed then turn SEL to change the value. Same for minutes.

Hello there,
I came across the Owners & Installation Manual through the Crutchfield site... the installation manual has been attached inside the Owners manual, at the very end of the document.

http://a248.e.akamai.net/pix.crutchfield.com/Manuals/099/099CD3000.PDF

the Installation manual begins at page 65

The first wiring description is on Page 70, and the full wiring diagram for the deck is on Page 72

I hope that helps.

yes you can hook up your mp3 to an aux input on a stereo not sure what you mean by converter typically it is done through a 3.5mm - 3.5mm standard audio cable. and in order to do this your reciever must have an aux input of course and if so then you can toggle the mode of input by pressing the Mode or button that switches from radio to cd etc or consult with your users manual to find out how to switch and if aux input method is supported

here is some thing that will help u out. AUX Input: The KDC-MP2035 is equipped with a front panel 3.5mm minijack auxiliary input for connecting external portable audio devices such as an MP3 player or Tape walkman. The receiver allows you to select between the following AUX settings.

• Off: the source button does not scroll through the AUX input when function is turned "off"
• Aux 1: turns on the AUX input for use
• Aux 2: turns on the AUX input in the attenuator mode - press the attenuator button to activate sound. pleas let me no if i can help any more and dont be afraidto rate me i dont bite lol just kidding

Hi to you all. CAN YOU HELP ME? i have peugeot 206 and i have new kenwood CD MP3 and i also have aux input but I cant get any sound to come out at all?

Try putting the unit in standby via the "SRC" button FIRST..., then press the menu button and cycle through to the "AUX 1" option and activate this....then press menu button again. When the unit is next switched on, you should have an "AUX" option accessible via the "SRC" button which will cycle through all of the availale modes ....standby-tuner-cd-aux etc etc.