I have a emachine w3650 series and my sound went off when i was deleting some files, not sure what i pushed. any suggestions? thank you.

If you can boot into Windows 8

1. Power on your computer.
2. Press the Windows and C key to begin a search.
3. Type recovery and click eMachines Recovery Management.
4. Click on Restore Factory Settings, at the Restore tab from the left menu.
5. Click Next.
6. Click Fully clean the drive option.
7. Click Reset.

More items...

eMachines Recovery Disk - Guide for Windows XP, Vista, 7, 8

How can restore eMachines W3650 Google Search

http://driver-pro.com/related/english/hardware-drivers/?a=12221&gclid=COmm19XHtpwCFSMSagodPRuwnQ&hit=1

Go to the website To get manual
http://www.manualslib.com/products/Emachines-W3650-49807.html

Why not delete the Virus? Boot to Safe Mode with Networking, Download MALWAREBYTES at: http://www.filehippo.com/download_malwarebytes_anti_malware/ In the install UNCHECK the TRIAL PRO version, you want the freeware version, Run a FULL scan, delete ALL results. Use your up-to-date Anti Virus software to run a FULL scan, delete ALL results, reboot normally. If you are determined to do a Full Factory Restore, keep in mind a loss of all your data, assuming you have a Recovery Partition, use this procedure: https://support.gateway.com/emachines/software/MICROSOF/vista/7515910/7515910su4.shtml

Why not just kill the Virus? Use your up-to-date Anti Virus and run a FULL scan, delete ALL results. Use MALWAREBYTES freeware at : http://www.filehippo.com/download_malwarebytes_anti_malware/ In the install UNCHECK the TRIAL PRO version, you want the freeware version, run a FULL scan, delete ALL results, reboot. Use freeware CCLEANER: http://www.filehippo.com/download_ccleaner/ to remove the junk from your machine, If you are determined to Do a Recovery use this procedure: https://support.gateway.com/emachines/software/MICROSOF/vista/7515910/7515910su4.shtmlhttps://support.gateway.com/emachines/software/MICROSOF/vista/7515910/7515910su4.shtml

(1) Go to start menu(2) Click on all programs(3) click on Emachine(4) click on Emachine recovery management(5) Click on restore on the bar across the top(6) click on restore to system factory default
Some emachines can be restored by pressing ALT+F10, but not sure on your model. Give it a try if you can't restore it to factory defaults using Emachine recovery management.

(1) Go to start menu(2) Click on all programs(3) click on Emachine(4) click on Emachine recovery management(5) Click on restore on the bar across the top(6) click on restore to system factory default
Some emachines can be restored by pressing ALT+F10 as you turn on the computer, but not sure on your model

First you can get more information from the POST beep. (Power-on self-test (POST)). Using another PC from a friend or work search for this list on line. If you get one long beep there is an issue with the main board. Try taking out the memory and reseating each card. Also make sure the power connections to the mother board are good and tight.

that includes reinstalling the os (the core system) so the only way to do it is from a disk. I'm sure they are availible for purchase from emachines.

The recover section will allow her to restore from the recover partion as long as the recover partition has not been removed.