Question about iLO V27DMBX Television

1 Answer

Ilo iwt3206 television

Turned the set off, now it will not turn on

Posted by on

  • Anonymous Oct 04, 2008

    I had the same problem even the remote will not turn it on we borrowed another tv and three days later, i was going to get rid of it then i decided to plug it in one last time to see if it would work the power button on tv i pushed to turn on and it went partially in the tv and came on and has worked so far. I have to use the sattilite remote to turn it on since the power button went in the tv partially. I have already took on tv back because of this reason it seems after you have it for about a year it starts acting up. Try unpluging and turn on later.

  • clay5 Oct 08, 2008

    i turned my tv off last night and now it will not come back on. The red light on the front only flashes when i press the power button instead of turning the tv on. the tv is also making a wierd high pitch sound.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • iLO Master
  • 5,568 Answers

Failing power supply- 
Nearly all modern electronics uses a 'switched mode power supply.'
They are more efficient, also much more prone to failure but offer the added benefit of being designed so a 'downstream' fault will cause the supply to enter a cyclic state to avoid setting fire to your home.
The supply itself will also cycle if it has an internal problem; once again, to prevent destroying itself or anything dependent on its outputs.
 
Supplies built a couple decades ago could only do this by blowing a fuse and there are conditions that can occur that would not blow the fuse but would allow overheating and further damage as well as fire.
 
The most common failure is of electrolytic capacitors which sometimes will show their illness by causing a bulging top or depositing a crystaline trace around their base.
Often though, they show no outer signs of failure but their value can shrink to tenths of a percent of the specified due to poor seals and defective chemicals. These can only be found through measurement with a capacitance meter with a DF (dissipaton factor - loss) capability. 
They will be in size from ~ 3/8" to 2" in height, ~1/4" to 1 1/4" in diameter, cylindrical, perpendicularly mounted on the board.
They will have markings on their shrink-wrapped sleeves (color can be any) and range from ~ .1 to several hundred uFd. with voltages from 3-4 volts to hundreds.
  
Power supplies are often mounted on a separate board (since they are often outsourced) so if you are adventurous, take the back panel off and take a look.  

Posted on Oct 06, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the hdmi connection?


The Ilo IWT3206 is a CRT type TV; it does have an ATSC tuner to support digital OTA TV signals. It doesn't have an HDMI port. The best input it has is the component video in. There are HDMI to component converters. However, most of them have issues with digital rights management protections (HDCP). The manual for the Ilo IWT3206 is available from the manufacturer (Funai). Their support page is at http://www.funai-corp.com/support/manuals.aspx . The direct link to the manual is http://www.funai-corp.com/support/om/IWT3206.pdf .

I wish that I had better news for you. If you have a different model, please post a comment or a new question.

Cindy Wells

May 15, 2015 | iLO IWT3206 TV

1 Answer

Need help with the code to program my universal ge remote to my ilo tv model number iwt3206


059,052,057. Try these codes. If you wish to get more, try the following links. Both the sites linked have set-up code list & set-up procedure to many popular brand remote controls. Surf the sites with patience.
http://electrohelponline.blogspot.com/
http://electro-medical.blogspot.com/

Jan 29, 2014 | iLO IWT3206 TV

1 Answer

How can i tell if my tv is digital


The iLo IWT3206 TV provides two built-in -- or integrated -- TV tuners: a National Television System Committee (NTSC) tuner and an Advanced Television Systems Committee (ATSC) tuner.
While the NTSC tuner allows iLo IWT3206-viewers to receive analog, free-to-air TV broadcasts, the ATSC tuner allows viewers to receive digital TV broadcasts via a cable or satellite provider.
The benefit of having an integrated ATSC tuner is that it negates the need for a separate cable box or satellite receiver, which can take up space.

Oct 24, 2013 | iLO IWT3206 TV

1 Answer

Does ilo model #IWT3206 television have reset button ?


It does not appear to have a reset button or any type of reset menu option. http://www.funaiservice.com/manual/ILO/Manual/IWT3206.pdf Some TV's will reset by simply unplugging them from the AC outlet for 1-2 minutes then plugging them back up.

Jan 31, 2012 | iLO IWT3206 TV

1 Answer

NO SOUND IS COMING OUT THE TELEVISION COMES ON HAS A NICE PICTURE BUT NO SOUND


Check the onscreen menu and make sure the internal speakers are turned on.

Jan 04, 2010 | iLO IWT3206 TV

1 Answer

Got dish network cable and i cant find my ilo model IWT3206 tv remote. codes arent listed in dish network manual and i need to get my tv turned to video 2


A universal remote will work. All you have to do is hit the imput button on the universal remote. Also you can contact...
FUNAI CORPORATION
Customer Service
Tel :1-800-605-8453
http://www.funai-corp.com

You are also able to order a replacement remote thru them.

Jul 16, 2009 | iLO IWT3206 TV

1 Answer

It just went out nothing iLO IWT3206 32 inch


I am sorry but I am unsure of what you are asking. If your tv wont do anything right down to not turning on I suggest you either take it to a repair shop or contact FUNAI CORPORATION.

To contact them here is their info:

FUNAI CORPORATION
Customer Service
Tel :1-800-605-8453 Press option 4 to order new remote.
http://www.funai-corp.com

Jul 15, 2009 | iLO IWT3206 TV

2 Answers

Need remote codes


You may be able to get help here. This is a link for the owners manual in PDF.
Hope this helps!
http://dukeelectronic.com/Manual/IWT3206.pdf

May 30, 2009 | iLO IWT3206 TV

1 Answer

My ilo tv picture is 1 1/2 inches. How can I fix this??


its a vertical problem could be bad cap or possible vertical i.c. okay take to tv shop is their still a warrany on this set sounds pretty new shad

May 14, 2009 | iLO IWT3206 TV

Not finding what you are looking for?
iLO V27DMBX Television Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top iLO Televison & Video Experts

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Jason Morris

Level 3 Expert

362 Answers

Are you an iLO Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...