Question about Canon MultiPASS C555 InkJet Printer

3 Answers

Canon MultiPassC555 printer

When I print a document it starts printing, when it gets to about the 2nd sentence it skips about 3or4 sentence's and prints the rest of the document just fine.

Posted by on

  • itsmeusha Nov 13, 2007

    I have recently had the same problem of the printer not printing the complete document.. It is not a problem with the ink cartridge since there is no gap on the paper for the few missing lines.. It is almost as if the printer consistently eats up a few lines from about 1/3 of the document and then prints rest of the data!



    Any help is appreciated!



    Thanks

×

Ad

3 Answers

I had the same problem and found that the cover for the ink cartridges was not closed all the way till it snapped into place. once it was seated right, the printer worked beautifully.

Posted on Apr 13, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

I have Windows XP. Out of the blue, my printer started doing the same thing. Looked like the printer was compressing a line or two after it printed a few correctly.
It had nothing to do with the ink cartridges, color or not. After trying everything else, I un-installed and re-installed the printer.
Voila! It works fine now. You can download the Windows XP driver easily, then don't forget to run both files to install it.
(Click on Start, then run and type in the following.)

C:\Temp\C555\setup\Setup.exe
and
C:\Temp\C555\setup\Setup2.exe

Posted on Dec 26, 2007

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 513 Answers

Could be a partial block - print a block of color and look for blank spaces in it, if you get them, then you should unblock the nozzle and the print head. Clean them with hot distilled water, and to be on the safe side clean the contacts as well. Good luck!

Posted on Mar 26, 2006

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Document missing printer using epson stylus office tx300f


  • Make sure you selected the correct paper size settings in your printing program and printer software.


  • Run a print head nozzle check to see if any of the nozzles are clogged. Then clean the print head, if necessary.


  • If a blank page exists in a document you are printing and you want to skip printing it, selectSkip Blank Pagesetting in your printer software.
    1. Do one of the following:
      • Windows 7: Clickwindows_start.gif, and selectDevices and Printers.


      • Windows Vista: Clickwindows_start.gif, and selectControl Panel(or point toSettingsand then selectControl Panel). SelectPrinter(underHardware and Sound) orPrinters.


      • Windows XP: ClickStart, and selectControl Panel(or point toSettingsand then selectControl Panel). SelectPrinters and Other Hardware(if available) and thenPrinters and Faxes.


    2. Right-click your printer icon, and then selectPrinting Preferences.


    3. Click theMaintenancetab, then select theSpeed & Progressbutton.


    4. In the Settings area, click on theSkip Blank Page.


    5. ClickOKas necessary to save your settings.
  • Hope It's resolve all Your Printer Problem,
    Or Still having Problem Then follow Us ForEpson Printer Support

Mar 27, 2014 | Epson Stylus Office Equipment & Supplies

1 Answer

I just installed my new HP 1660 Printer that I bought last year. It has the following problems; 1. There are horizontal lines on the photo colored prints 2. When I print MS word files,...


This is the same problem. You need to run the cleaning cycle on the printer. Go to Control Panel > Printers > Select your Printer > Printer Properties > Maintenance > Clean Print Nozzles.
Please remember to vote for me if you like my solution.

Apr 07, 2011 | HP Office Equipment & Supplies

1 Answer

Canon MP 830 gaps in printing


Uninstall the printer driver completely, then reinstall the driver again.

Aug 06, 2017 | Canon PIXMA MP830 All-In-One InkJet...

1 Answer

I am new to mp 160 canon pixma printer. I am able to take xerox successfully . I installed driver as well . I dont know how to print / scan the documents . Please tell me the options


well u have a botton that has scan written beside it press it twice then a window will apear press on the sentence it will start scaning by the typ of document or photo u chose and printing is very easy after u install ur printer just right click on the img and say print or open the easy print and chose ur img through it

Dec 18, 2008 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

Printer prints just part of sentences


Heeheehee do I feel stupid I just checked the printer for the upteenth time and finally found the problem.
I had a piece of paper (sticky price tag paper ) on the ink track so that was what was causing my problem. It was covered in ink LOL.
Wanaka

May 06, 2008 | Lexmark X1240 All-In-One InkJet Printer

2 Answers

Full ink cartriges print a few lines and skip a few lines


well..did you run a test page?

or clean the print heads?

or recalibrate them?

recommend all these steps for you

and as my 2200th solution, you are entitled to a FREE tuneup for good. find out more about that service here

Mar 23, 2008 | Canon PIXMA iP90 Mobile Printer

1 Answer

Printing problem with Star Sp200


Seems like a problem with the printer head...It is usual for matrix printers and it happens due to wear and tear..You will have to get the printing head to get replaced..

Oct 27, 2007 | Star Micronics SP 2000 Matrix Printer

1 Answer

Bjc 2100 printing errors


Replace the printing head. It's a known problem for BJC 2100.

Jul 26, 2007 | Canon BJC 2100 InkJet Printer

Not finding what you are looking for?
Canon MultiPASS C555 InkJet Printer Logo

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2179 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...