Question about Canon Printers & Copiers

1 Answer

Need to reset waste tank on a pixma 760 - Canon Printers & Copiers

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem with the waste tank message. I read all the answers on how to reset so the error message dosent pop up all the time and they work. But I didnt see where anyone told how to clean it. On the left side of the printer where the cartridges sit when the printer is not in use is where the overflow of ink is. I used kleenex and pushed the bracket over and stuffed them under the bracket and found loads of ink in the bottom left side of the printer. I took out the little filter screens that the cartridges sit on and cleaned them. There was ink everywhere. I used Qtips, Kleenex, wipes and alcohol to get all the ink out. Needless to say I was covered with ink. Then did the steps to reset it. Just resetting isnt solving the problem.

Posted on Sep 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

CANON ERROR E27


Canon MP140 Error Code injet printer reset procedure:

Canon waste ink tank problem.
1. Change the waste ink absorber

2. Reset waste ink tank counter

Go to the service menu;

1. With the printer power OFF , press the Power button while pressing and holding the Stop/ Reset button.
NEXT
2. When the Power is ON, hit the Stop/Reset button 2 times while pressing and holding the Power button.
NEXT
3. When releasing the Power button and the Stop / Reset button , the printer will go into a service mode.
NEXT
4 When the ON-OFF lights in Green, hit the Stop/Reset button the specified number of times according to the function listed in below.
NEXT
Each time the Stop/Reset button is pressed, the LED lights in orange and green, starting with orange.
NEXT
Hit 4 times for waste ink counter reset.

The number of the Reset button pressing LED
0 time ... Green Power off
1 time ... Orange Service pattern print
2 times ... Green EEPROM print
3 times ... Orange EEPROM reset (EEPROM reset)
4 times ... Green Waste ink counter reset


On the end press POWER button to exit .




FOR USE IN : Canon PIXMA iP1200, Canon PIXMA iP1600, Canon PIXMA iP1700, Canon iP1800, Canon PIXMA iP2600, iP6210D, PIXMA iP6220D, iP6310D, Canon PIXMA MP140, Canon PIXMA MP150, Canon PIXMA MP160, PIXMA MP170, Canon PIXMA MP180, MP210, Canon PIXMA MP450, MP460, MP470, Canon PIXMA MX300, Canon PIXMA MX310, Canon PIXMA MX470

Jul 31, 2010 | Acer Printers & Copiers

1 Answer

Waste ink tank reset


Google is your best bet for a question like that, where did you get the instructions to reset the waste ink absorber?
Look there also

Jul 18, 2010 | Canon PIXMA iP5000 InkJet Photo Printer

1 Answer

Sir , my printer canon pixma ip 1200 when i start to print it show waste ink obsorber is full. please help


Hi. I think the problem on that one is the waste ink tank is already full, so you need to clean it or replace the pads on it, because when you are printing or opening your printer it blows little amount of ink to the heads so that it will not be clogged, and that ink goes into the used/waste ink tank. Also after cleaning the used/waste ink tank you need to reset the counter of the printer so that it would print again, you can just download the counter reset software2_bing.gif over the internet or just bring that machine to an authorize canon printer technician. Hope this Helps

Jun 09, 2010 | Canon PIXMA iP1200 Photo Printer

1 Answer

Cannon ip90 waste ink tank is full


These is all that u need to do:

4 step to Reset waste ink tank counter CANON PIXMA iP 1000
STEP 1:- Disconnect printer from AC power
STEP 2:- Press and HOLD the POWER button, and connect printer to AC power
STEP 3:- release the the POWER button
STEP 4:- Press the POWER button again

There's a lot of methods and choice on how to reset it and this is all my best to share to you.

Good luck!

If i am helpful please rate me.
Thank you.

Yboyandrei

Aug 15, 2009 | Canon PIXMA iP90 InkJet Printer

1 Answer

Reset the ink waste tank code, and now pixma ip4000 won't turn on


Try removing the printhead and power up, if it works you need a new printhead. Many times when the printhead goes bad the machine won't power up.

Jun 21, 2009 | Canon PIXMA iP4000 InkJet Photo Printer

1 Answer

Waste ink tank full


You can try this

Reset ip2000
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not,
press the Power button once more.
8. Your printer should respond as normal..


Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Jan 21, 2009 | Canon PIXMA iP2000 InkJet Printer

2 Answers

Where is the waste catrage in the PIXMA iP3000


Try this solution to reset the ink tank , it should work for most pixmas and several other Canon printers.

http://www.fixya.com/support/t538192-waste_ink_almost_full

Dec 23, 2008 | Canon PIXMA iP3000 InkJet Photo Printer

1 Answer

Pixma Ip90v waste ink tank full


It's time to replace 3's WASTE INK ABSORBER KIT & reset waste ink counter.
You have to send it to your nearest service centre.
The WASTE INK ABSORBER KIT is approx. USD10/pcs

Dec 16, 2008 | Canon PIXMA iP90v Printer

2 Answers

Waste ink tank full


please help me for repair waste in tank full canon ip3300.

Nov 01, 2007 | Canon PIXMA iP3300 InkJet Photo Printer

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

199 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts

kakima

Level 3 Expert

96417 Answers

old marine
old marine

Level 3 Expert

1461 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...